Sanyo LNS-W32 - Manuals

-4- Fig-6 Fig-7 DRIVERIN THE LENS LENS MOUNTINGBRACKET 4 MOUNT THE LENS (See Figure-5 and 6) 5 M O U N T T H E L I G H T- B L O C K S H E E T A N D FRONT PANEL (See Figure-7) Remove protective caps (front and back) on the lens. Mount the lens on lens mounting bracket with 4 screws. Use the driver (4...

4 MOUNT THE LENS (See Figure-5) Remove protective caps (front and back) on the lens. Mount the lens on lens mounting bracket with Upper 2 screws. Use the driver (4 mm, Yellow) included with the lens to fasten the screws. Remove the lower 2 screws on the Lens. (Lower 2 screws are not used.) Slide the...

FOCUS ADJUSTMENT Set up the projector and project image on the screen.1. Loosen the Focus Lock Screw on the lens.2. Rotate the lens to obtain proper focus on center area of the screen. 3. Tighten the Focus Lock Screw.When proper focus is not observed at outer area ofthe screen, proceed to following ...