Samsung U28E570DSL - Manuals

5 Cleaning ― Exercise care when cleaning as the panel and exterior of advanced LCDs are easily scratched. ― Take the following steps when cleaning. 1 Power off the product and computer. 2 Disconnect the power cord from the product. ― Hold the power cable by the plug and do not touch the cable with w...

6 Warning • DO NOT PLACE CANDLES, INSECT REPELLANTS OR CIGARETTES ON TOP OF THE PRODUCT. DO NOT INSTALL THE PRODUCT NEAR HEAT SOURCES. • Do not install the product in poorly ventilated spaces such as a bookcase or closet. • Install the product at least 10 cm away from the wall to allow ventilation. ...

7 Warning • There is a high voltage inside the product. Never disassemble, repair or modify the product yourself. ‒ Contact Samsung Customer Service Center for repairs. • To move the product, first disconnect all the cables from it, including the power cable. • If the product generates abnormal soun...

9 Preparations Chapter 02 Parts Control Panel ― The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. LEFT Return JOG Button Function Key Guide RIGHT DOWN PRESS(ENTER) UP Icons Description JOG Button Multi directional butt...

10 Eye Saver Mode Volume Features Eye Saver Mode Off • UP/DOWN: Adjust Brightness , Contrast , Eye Saver Mode . • LEFT/RIGHT: Adjust Volume . • PRESS(ENTER): Display Function Key Guide. Direct Key guide ― The shortcut button screen (OSD menu) shown below is displayed only when the monitor screen is ...

11 Function Key Guide ― To enter the main menu or to use other items, press the JOG button to display the Function Key Guide. You can exit by pressing the JOG button again. Return UP/DOWN/LEFT/RIGHT: Move to the item you want. The description for each item will appear when the focus changes.PRESS(EN...

13 Configuring Eye Saver Mode, Brightness and Contrast from the Initial Screen Adjust the Brightness , Contrast and Eye Saver Mode by moving the JOG button. Eye Saver Mode Brightness Contrast Off ― The displayed image may differ depending on the model. ― The default brightness can vary depending on ...

14 Reverse Side ― The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Port Description Connect to a source device using an HDMI cable. ― HDMI 1 support 3840 x 2160 30 Hz ― HDMI 2 support 3840 x 2160 60 Hz Connects to a P...

16 Installing a Wall-mount Kit or Desktop Stand ― Power the product off and remove the power cable from the power socket. 1 2 4 3 A Attach the wall-mount kit or desktop stand here B Bracket (sold separately) Align the grooves and tightly fasten the screws on the bracket on the product with the corre...

17 Installation Attaching the Stand ― Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards. ― The exterior may differ depending on the product. 1 Insert the stand neck into the stand base in the direction shown in the figure. 2 Che...

18 Removing the Stand ― Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards. ― The exterior may differ depending on the product. 1 Place a soft cloth over the table to protect the product and place the product onto the cloth so th...

19 Connecting and Using a Source Device Chapter 03 Pre-connection Checkpoints ― Before connecting a source device, read the user manual provided with it.The number and locations of ports on source devices may differ from device to device. ― Do not connect the power cable before connecting all other ...

20 Connection Using an DP Cable DP IN Connecting to Headphones Tidying Up the Connected Cables Connecting the Power 1 2 3 1 Connect the power cable to the AC/DC adapter. Then, connect the AC/DC adapter to the DC 14V port on the back of the product. 2 Next, connect the power cable to the power outlet...

21 Correct posture to use the product Use the product in the correct posture as follows: • Straighten your back. • Adjust the angle so light does not reflect on the screen. • Keep your forearms perpendicular to your upper arms and level with the back of your hands. • Keep your elbows at about a righ...

22 Screen Setup Configure the screen settings such as brightness.A detailed description of each function is provided. Refer to your product for details. Chapter 04 SAMSUNG MAGIC Bright This menu provides an optimum picture quality suitable for the environment where the product will be used. ― This m...

23 Brightness You can adjust the general brightness of the picture. (Range: 0~100)A higher value will make the picture appear brighter. ― This menu is not available when SAMSUNG M A G I C Bright is set to Dynamic Contrast mode. ― This menu is not available when Eco Saving Plus is enabled. ― This men...

24 SAMSUNG MAGIC Angle SAMSUNG M A G I C Angle allows you to configure the settings to obtain the optimum picture quality according to your viewing angle. ― This menu is not available when SAMSUNG M A G I C Bright is set to Cinema or Dynamic Contrast mode. ― This menu is not available when Game Mode...

26 Screen Adjustment ― This menu is only available when Picture Size is set to Screen Fit in AV Mode. When a 480P or 576P or 720P or 1080P signal is input in AV mode and the monitor can display normally, select Screen Fit to adjust horizontal position in 0-6 levels. Configuring H-Position & V-Po...

27 Configuring the PIP/PBP Settings A detailed description of each function is provided. Refer to your product for details. Chapter 05 PIP/PBP The PIP (Picture in Picture) function separates the screen into two parts. One source device is displayed on the main screen at the same time the another sou...

28 Configuring PIP/PBP Mode Enable or disable the PIP/PBP Mode function. Configuring Size Select the size and aspect ratio of the sub-screen. • : Select the icon image if you want to use PBP mode where the optimum resolution for the left and right sides of the screen is 1920 x 2160 (width x height)....

29 Configuring Picture Size PIP Mode (available in PIP mode ( Size / / )) In PC mode • Auto : Display the picture according to the aspect ratio of the each screen input source. • Wide : Display the picture in full screen regardless of the aspect ratio of the each screen input source. In AV mode • 4:...

30 Adjusting OSD (On Screen Display) settings A detailed description of each function is provided. Refer to your product for details. Chapter 06 Transparency Set the transparency for the menu windows. 한국어 OnScreen Display TransparencyLanguageDisplay Time Configure the transparency of the menu window...

31 Setup and Reset A detailed description of each function is provided. Refer to your product for details. Chapter 07 FreeSync The functions available may vary depending on the product model. Refer to the actual product. FreeSync is a DisplayPort 1.2 function, so the choice of the DisplayPort Ver. 1...

33 Eco Saving Plus Reduce energy consumption compared to consumption at the maximum brightness level. ― This option is not available when SAMSUNG M A G I C Bright is in Dynamic Contrast mode. ― This menu is not available when Game Mode is enabled. ― This menu is not available when Eye Saver Mode is ...

34 Key Repeat Time Control the response rate of a button when the button is pressed. Acceleration , 1 sec , or 2 sec can be selected. If No Repeat is selected, a command responds only once when a button is pressed. Power LED On Configure the settings to enable or disable the power LED located at the...

35 Installing the Software Chapter 08 Easy Setting Box Easy Setting Box enables users to use the monitor by partitioning multiple sections. To install the latest version of Easy Setting Box , download it from the Samsung Electronics website at http://www.samsung.com. ― The software may not work prop...

36 Troubleshooting Guide Chapter 09 Requirements Before Contacting Samsung Customer Service Center ― Before calling Samsung Customer Service Center, test your product as follows. If the problem persists, contact Samsung Customer Service Center. Testing the Product Check if your product is operating ...

39 Specifications Chapter 10 General Model Name U28E570D Size 28 Class (28.0 Inches / 70.8 cm) Display area 620.93 mm (H) x 341.28 mm (V)24.4 Inches (H) x 13.4 Inches (V) Pixel Pitch 0.16 mm (H) x 0.16 mm (V)0.006299 Inches (H) x 0.006299 Inches (V) Maximum Pixel Clock 533.25 MHz (DisplayPort, HDMI)...

44 Appendix Chapter 11 Responsibility for the Pay Service (Cost to Customers) ― When the service is requested, in spite of in warranty, we may charge you for a visit from a service technician in the following cases. Not a product defect Cleaning of the product, Adjustment, Explanation, Re-installati...