Samsung S32R754UEU - Manuals

6 Warning • DO NOT PLACE CANDLES, INSECT REPELLANTS OR CIGARETTES ON TOP OF THE PRODUCT. DO NOT INSTALL THE PRODUCT NEAR HEAT SOURCES. • Keep the plastic packaging out of the reach of children. ‒ Children may suffocate. • Do not install the product on an unstable or vibrating surface (insecure shelf...

7 Warning • There is a high voltage inside the product. Never disassemble, repair or modify the product yourself. ‒ Contact Samsung Customer Service Centre for repairs. • To move the product, first disconnect all the cables from it, including the power cable. • If the product generates abnormal soun...

8 Caution • Leaving the screen fixed on a stationary image for an extended period of time may cause afterimage burn-in or defective pixels. ‒ Set the screen to power-saving mode or moving-picture screen saver when not using the product for an extended period of time. • Disconnect the power cord from...

10 Preparations Chapter 02 Parts Control Panel ― The colour and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Function Key Guide JOG Button DOWN PRESS(ENTER) LEFT Return Power LED UP RIGHT Parts Description JOG Button Multi dire...

11 Direct Key Guide ― On the Direct Key Guide screen, the following menu options appear when the product screen is switched on or the input source is changed. Eye Saver Mode Features Eye Saver ModeOff • UP/DOWN: Adjust Brightness , Contrast , Eye Saver Mode . • PRESS(ENTER): Display Function Key Gui...

13 When the product displays nothing (i.e. Power saving mode or Non-signal mode), 2 direct keys for control source and power could be used as below. JOG Button Power saving/Non-signal mode UP Source Change Down PRESS(ENTER) for 2 seconds Power Off When the product displays the menu the JOG Button co...

14 Types of Ports ― The functions available may vary depending on the product model. The colour and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Refer to the actual product. DC 19V SERVICE MINI DP IN HDMI IN Port Description SE...

15 Upgrading the Software via USB 1 Connect a USB memory to the SERVICE port shown in the figure. DC 19V SERVICE MINI DP IN HDMI IN When the screen is on, press the jog button to display the Function Key Guide. When the Function Key Guide are displayed, press and hold the jog button down for approxi...

16 Note 1 To perform software upgrade by using a USB memory, first format the USB memory to FAT32. 2 When performing upgrade, make sure that only one BIN file (.bin) is saved in the root directory. 3 To upgrade the software for the SR75 model, make sure the upgrade files are .bin formats. The file n...

17 Adjusting the Product Tilt and Height ― The colour and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. S27R75* 213.9 mm 576.0 mm 602.9 mm 0 ~ 72 ˚ 331.6 mm S32R75* 184.7 mm 0 ~ 66 ˚ 319.8 mm Adequate operation range 20 ˚ -5 ˚ W...

18 Precautions for moving the product • Do not directly apply pressure on the screen. • Do not hold the screen when moving the product. • Do not hold the product upside down only by the stand. • Hold the lower corners or edges of the product when moving it.

19 Precautions for installation and use ≤ 40 mm 30 ~ 65 mm 55 ~ 90 mm • Table thickness for installation: ≤ 40 mm, 30 ~ 65 mm, 55 ~ 90 mm • To install the product on a table, make sure the table is strong enough to bear the product weight. Installing the product on a table made of glass or other fra...

20 ≤ 90 mm • Table with no raised edge • The stand can be used through adjustment depending on the table thickness. (≤ 90 mm) ≤ 40 mm 30 ~ 65 mm 55 ~ 90 mm • Table with a spaced partition • The stand can be installed if the gap between the table and the partition is more than 15 mm. ― Tidy up the ca...

21 Installation Attaching the Stand ― Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards. ― The exterior may differ depending on the product. ― The table should be relocated, depending on the space where the stand will be install...

22 Removing the Stand ― Before removing the stand from the product, place the product on a flat and stable surface with the screen facing down. ― The exterior may differ depending on the product. ― The table should be relocated, depending on the space where the stand will be installed. Caution Do no...

23 Tidying Up the Connected Cables 1 Connect the Y cables to the two ports, as shown in the figure. 2 Tidy up the connected Y cable by aligning it with the stand groove, as shown in the figure. ― Make sure the Y cable is tidied up at the left of the groove. ― The MINI DP cable can be tidied up at th...

24 Connecting and Using a Source Device Chapter 03 Read below before installing the product. 1 Before installing the product, check the shapes of both ports of the supplied signal cables and the shapes and locations of the ports on the product and external device. 2 Before installing the product, ma...

25 Connection Using the MINI DP Cable First make sure that the power cables for product and other devices (e.g. PC, settop box, etc.) are removed. MINI DP IN ― S27R75*: To display 2560 x 1440 @ 144 Hz, use a MINI DP cable that supports 2560 x 1440 @ 144 Hz. Make sure that the graphics card of the MI...

26 Correct posture to use the product Use the product in the correct posture as follows: • Straighten your back. • Allow a distance of 45 to 50cm between your eye and the screen, and look slightly downward at the screen. • Keep your eyes directly in front of the screen. • Adjust the angle so light d...

27 Screen Setup Function Key Guide → → Picture Configure the screen settings such as brightness. A detailed description of each function is provided. Refer to your product for details. Chapter 04 ― The functions available may vary depending on the product model. The colour and shape of parts may dif...

28 Brightness You can adjust the general brightness of the picture. (Range: 0~100)A higher value will make the picture appear brighter. ― This menu is not available when SAMSUNG M A G I C Bright is set to Dynamic Contrast mode. ― This menu is not available when Eco Saving Plus is enabled. ― This men...

29 SAMSUNG MAGIC Upscale SAMSUNG M A G I C Upscale function can enhance the layers of the picture details and the vividness of the picture. The function has more obvious effects on low-resolution pictures. ― This menu is not available when SAMSUNG M A G I C Bright is set to Cinema or Dynamic Contras...

30 Picture Size Change the picture size. ― This menu is not available when PIP/PBP Mode is set to On and the Size is set to (PBP Mode). In PC mode • Auto : Display the picture according to the aspect ratio of the input source. • Wide : Display the picture in full screen regardless of the aspect rati...

31 Configuring the PIP/PBP Settings Function Key Guide → → PIP/PBP A detailed description of each function is provided. Refer to your product for details. Chapter 05 ― The functions available may vary depending on the product model. The colour and shape of parts may differ from what is shown. Specif...

32 Size Select the size and aspect ratio of the sub-screen. • S27R75*: / / • S32R75*: / / / Position Select the position of the sub-screen from the available options. • / / / ― Not available when PBP is selected. ― The screen may flicker if the input source is unstable. Picture Size Select the image...

34 Adjusting OSD (On Screen Display) settings Function Key Guide → → On Screen Display A detailed description of each function is provided. Refer to your product for details. Chapter 06 ― The functions available may vary depending on the product model. The colour and shape of parts may differ from w...

35 Setup and Reset Function Key Guide → → System A detailed description of each function is provided. Refer to your product for details. Chapter 07 ― The functions available may vary depending on the product model. The colour and shape of parts may differ from what is shown. Specifications are subje...

36 3 Base on the test result, select Yes / No / Show Again . Yes No Show Again Do you still see the problem in this test photo?If you need to see the photo again, click Show Again. • You will see the following screen when you select Yes . Self Diagnosis Complete Contact the Samsung Call Center for a...

37 FreeSync (S27R75*) FreeSync technology is solution that eliminates screen tearing without all the usual lag and latency. This feature will eliminate screen tearing and lag during game play. Improve your gaming experience.The displayed FreeSync menu items on the monitor may vary, depending on the ...

38 Eco Saving Plus Reduce energy consumption compared to consumption at the maximum brightness level. ― This option is not available when SAMSUNG M A G I C Bright is in Dynamic Contrast mode. ― This menu is not available when Game Mode is enabled. ― This menu is not available when Eye Saver Mode is ...

40 Information Function Key Guide → → Information A detailed description of each function is provided. Refer to your product for details. Chapter 08 ― The functions available may vary depending on the product model. The colour and shape of parts may differ from what is shown. Specifications are subj...

41 Installing the Software Chapter 09 Easy Setting Box Easy Setting Box enables users to use the product by partitioning multiple sections. To install the latest version of Easy Setting Box , download it from the Samsung Electronics website at http://www.samsung.com. ― The software may not work prop...

42 Troubleshooting Guide Chapter 10 Requirements Before Contacting Samsung Customer Service Centre ― Before calling Samsung Customer Service Centre, test your product as follows. If the problem persists, contact Samsung Customer Service Centre. Product diagnosis (Screen issue) If a problem occurs wi...

43 The message Check the cable connection and the settings of the source device. appears. Check that the cable is properly connected to the product.Check that the device connected to the product is powered on.If the product is in HDMI or DisplayPort mode, press the JOG button to display the function...

45 Specifications Chapter 11 General Model Name S27R75* S32R75* Size 27 Class (27 Inches / 68.4 cm) 32 Class (31.5 Inches / 80.0 cm) Display area 596.736 mm (H) x 335.664 mm (V) 697.3 mm (H) x 392.2 mm (V) Pixel Pitch 0.2331 mm (H) x 0.2331 mm (V) 0.06 mm (H) x 0.181 mm (V) Maximum Pixel Clock 594 M...

46 Standard Signal Mode Table Model Name S27R75* S32R75* Synchronization Horizontal Frequency 70.56 ~ 214.56 kHz 147.78 ~ 148.38 kHz Vertical Frequency 48 ~ 144 Hz (DisplayPort / HDMI) 60 Hz (DisplayPort / HDMI) Resolution Optimum Resolution 2560 x 1440 @ 144 Hz (DisplayPort / HDMI) 3840 x 2160 @ 60...

51 Appendix Chapter 12 Responsibility for the Pay Service (Cost to Customers) ― When the service is requested, in spite of in warranty, we may charge you for a visit from a service technician in the following cases. Not a product defect Cleaning of the product, Adjustment, Explanation, Re-installati...