Samsung LS27R650FDEXXY - Manuals

5 Cleaning High-glossy models can develop white stains on the surface if an ultrasonic wave humidifier is used nearby. ― Contact your nearest Samsung Customer Service Centre if you want to clean the inside of the product(Service fee will be charged.) Do not press the product screen with hands or oth...

6 Warning • DO NOT PLACE CANDLES, INSECT REPELLANTS OR CIGARETTES ON TOP OF THE PRODUCT. DO NOT INSTALL THE PRODUCT NEAR HEAT SOURCES. • Keep the plastic packaging out of the reach of children. ‒ Children may suffocate. • Do not install the product on an unstable or vibrating surface (insecure shelf...

7 Warning • There is a high voltage inside the product. Never disassemble, repair or modify the product yourself. ‒ Contact Samsung Customer Service Center for repairs. • To move the product, first disconnect all the cables from it, including the power cable. • If the product generates abnormal soun...

9 Parts Control Panel ― The colour and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Return LEFT JOG Button RIGHT DOWN PRESS(ENTER) UP Power LED Parts Description JOG Button Multi directional button that helps navigate. ― The JO...

10 Analog mode Brightness Auto Adjustment Volume Features Eye Saver Mode Off ― Analog mode option • : Adjust Brightness , Contrast , Sharpness . • : Auto Adjustment ― Changing the resolution in Display Properties will activate the Auto Adjustment function. ― This function is only availabel in Analog...

11 Function Key Guide ― To use the Function Key Guide, press the JOG button. Then the following window appears. Return UP/DOWN/LEFT/RIGHT: Move to the item you want. The description for each item will appear when the focus changes.PRESS(ENTER): The selected item will be applied. Icons Description Se...

13 Changing Brightness, Contrast and Sharpness settings You can adjust Brightness , Contrast or Sharpness by moving the JOG button up or do wn, if no OSD menu is displayed. Brightness Contrast Sharpness 100 ― The displayed image may differ depending on the model. Brightness ― This menu is not availa...

14 Reverse Side ― The colour a nd shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Port Description Connect the power cord for your monitor to the POWER IN port on the back of the product. Connects to a PC using a USB cable. Compat...

15 Adjusting the Product Tilt and Height ― The colour and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. • The monitor tilt and height can be adjusted. • Hold the top center of the product and adjust the height carefully. • When ...

16 Anti-theft Lock ― An anti-theft lock allows you to use the product securely even in public places. ― The locking device shape and locking method depend on the manufacturer. Refer to the user guide provided with your anti-theft locking device for details. To lock an anti-theft locking device: 1 Fi...

17 • Notes ‒ Using a screw longer than the standard length can damage the internal components of the product. ‒ The length of screws required for a wall mount that does not comply with the VESA standards may vary depending on the specifications. ‒ Do not use screws that do not comply with the VESA s...

18 1 2 3 4 Insert the stand neck into the stand base in the direction shown in the figure. Tightly fasten the connecting screw at the bottom of the stand base. Place the protective Styrofoam (cushion) included in the package on the floor and place the product facing down on the Styrofoam, as shown i...

19 1 2 3 Place the product on a clean and flat floor as shown in the figure. Push the key upward and hold. Lift the stand neck in the arrow direction to detach it from the display. Unfasten the connecting screw at the bottom of the stand base, and then remove the stand neck from the stand base by pu...

20 Connecting and Using a Source Device Chapter 03 Read below before installing the monitor. 1 Before installing the product, check the shapes of both ports of the supplied signal cables and the shapes and locations of the ports on the product and external device. 2 Before installing the product, ma...

21 Connection Using the HDMI Cable First make sure that the power cables for product and other devices (e.g. PC, settop box, etc.) are removed. HDMI IN Connection Using the HDMI-DVI Cable First make sure that the power cables for product and other devices (e.g. PC, settop box, etc.) are removed. HDM...

22 Connecting the Product to a PC as a USB HUB Connecting a USB device ― The product can function as a HUB by connecting to a PC via a USB cable. You can connect a source device directly to the product and control the device from the product, without having to connect the device to the PC. To use th...

23 ― To detect and start a USB device faster, connect the device to the USB 3.0 port on the product. The read/write will be affected by the USB device and your PC. ― The product does not support media play. If you need to play a file in your USB device, please connect the product as a Hub to your PC...

24 Tidying Up the Connected Cables 1 2 3 Stand assembly is complete. Rotate the machine to the highest vertical position. Connect the corresponding cables. 4 5 6 Open the COVER-STAND NECK RIGHT, and rotate the open part at the bottom. Place the corresponding cables into the stand-neck holder. Do not...

25 Correct posture to use the product Use the product in the correct posture as follows: • Straighten your back. • Allow a distance of 45 to 50cm between your eye and the screen, and look slightly downward at the screen. • Keep your eyes directly in front of the screen. • Adjust the angle so light d...

26 Screen Setup Function Key Guide → → Picture Configure the screen settings such as brightness. A detailed description of each function is provided. Refer to your product for details. Chapter 04 ― The functions available may vary depending on the product model. The colour and shape of parts may dif...

27 Brightness You can adjust the general brightness of the picture. (Range: 0~100)A higher value will make the picture appear brighter. ― This menu is not available when SAMSUNG M A G I C Bright is set to Dynamic Contrast mode. ― This menu is not available when Smart Eco Saving is enabled. ― This me...

29 Picture Size Change the picture size. ― This option is not available when FreeSync is enabled.. In PC mode • Auto : Display the picture according to the aspect ratio of the input source. • Wide : Display the picture in full screen regardless of the aspect ratio of the input source. In AV mode • 4...

30 Adjusting OSD (On Screen Display) settings Function Key Guide → → On Screen Display A detailed description of each function is provided. Refer to your product for details. Chapter 05 ― The functions available may vary depending on the product model. The colour and shape of parts may differ from w...

31 Setup and Reset Function Key Guide → → System A detailed description of each function is provided. Refer to your product for details. Chapter 06 ― The functions available may vary depending on the product model. The colour and shape of parts may differ from what is shown. Specifications are subje...

33 FreeSync FreeSync technology is solution that eliminates screen tearing without all the usual lag and latency. This feature will eliminate screen tearing and lag during game play. Improve your gaming experience.The displayed FreeSync menu items on the product may vary, depending on the product mo...

34 Smart ECO Saving The Smart ECO Saving function reduces power consumption by controlling the electric current used by the product panel. ― This option is not available when SAMSUNG M A G I C Bright is in Dynamic Contrast mode. ― This menu is not available when Eye Saver Mode is enabled. ― Game Mod...

35 Power LED On Configure the settings to enable or disable the power LED located at the lower part of the product. • Working : The power LED is on when the product is turned on. • Stand-by : The power LED is on when the product is turned off. Reset All Return all the settings for the product to the...

37 Installing the Software Chapter 08 Easy Setting Box Easy Setting Box enables users to use the monitor by partitioning multiple sections. To install the latest version of Easy Setting Box , download it from the Samsung Electronics website at http://www.samsung.com. ― The software may not work prop...

38 Troubleshooting Guide Chapter 09 Requirements Before Contacting Samsung Customer Service Center ― Before calling Samsung Customer Service Center, test your product as follows. If the problem persists, contact Samsung Customer Service Center. Product diagnosis (Screen issue) If a problem occurs wi...

41 Specifications Chapter 10 General Model Name S24R650FD*/S24R652FD*/S24R654FD* S27R650FD*/S27R652FD*/S27R654FD* Size 24 Class (23.8 Inches / 60.4 cm) 27 Class (27.0 Inches / 68.6 cm) Display area 527.04 mm (H) x 296.46 mm (V)20.7 Inches (H) x 11.7 Inches (V) 597.888 mm (H) x 336.314 mm (V)23.5 Inc...

43 Standard Signal Mode Table Model Name S24R650FD*/ S24R652FD*/S24R654FD*/ S27R650FD*/ S27R652FD*/ S27R654FD* Synchronization Horizontal Frequency 30 – 81 kHz Vertical Frequency 56 – 75 Hz (VGA) 50 – 75 Hz (HDMI/DP) Resolution Optimum Resolution 1920 x 1080 @ 60 Hz (D-SUB)1920 x 1080 @ 75 Hz (HDMI,...

46 Appendix Chapter 11 Responsibility for the Pay Service (Cost to Customers) ― When the service is requested, in spite of in warranty, we may charge you for a visit from a service technician in the following cases. Not a product defect Cleaning of the product, Adjustment, Explanation, Re-installati...

47 Extended warranty You can buy an extended warranty within 90 days of purchasing the product.The extended warranty will cover an additional period of 3 years, beyond the standard 3 year warranty.Samsung guarantee that replacement parts will be available for 5 years after the end of production.Afte...