Samsung DW50DG450B00 - Manuals

English 5 Safety inf ormation Instructions about the WEEE Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in countries with separate collection systems)This marking on the product, accessories or literature indicates that the product and its electronic acce...

English 6 Safety inf ormation Safety information Important safety precautions To reduce the risk of fire, electric shock, or injury to persons when using your appliance, follow basic precautions, including the following: 1. This appliance is not intended for use by persons (including children) with ...

English 7 Safety inf ormation 6. For appliances with ventilation openings in the base, a carpet must not obstruct the openings. 7. Children of less than 3 years should be kept away unless continuously supervised. 8. CAUTION : In order to avoid a hazard due to inadvertent resetting of the thermal cut...

English 8 Safety inf ormation Safety information Instructions when using your dishwasher This dishwasher is not designed for commercial use. It is intended for use in domestic households and in similar working and residential environments such as:• Shops• Offices and showroomsand by residents in est...

English 9 Safety inf ormation Instructions for protecting your children This appliance is not a toy! To avoid the risk of injury, keep children well away and do not allow them to play in or around the dishwasher or to use the controls. They will not understand the potential dangers posed by it. They...

English 10 Safety inf ormation Safety information Instructions for installing your dishwasher Before setting up the appliance, check it for any externally visible damage. Under no circumstances should you use a damaged appliance. A damaged appliance could be dangerous.The dishwasher must only be plu...

English 13 Installation Installation What’s included Make sure all the parts are included in the product package. If you have a question about the dishwasher or the parts, contact a local Samsung customer centre or your retailer. The actual appearance of the dishwasher may differ, depending on your ...

English 15 Installation Installation requirements To prevent a risk of fire, electric shock, or personal injury, all wiring and grounding must be done by a qualified technician. Power supply • An individual 220-240 V~, 50 Hz branch circuit that is dedicated to the dishwasher. • Power outlet with a m...

English 16 Installation Installation Drain If you are using a drain system dedicated to the dishwasher, connect the drain hose to a drain system that is between 30 cm and 70 cm off the ground. Connecting the drain hose to a drain system more than 80 cm off the ground can cause the drained water to f...

English 17 Installation Step-by-step installation (Built-in models) The installation procedure may differ depending on the model. STEP 1 Select a location A B Select a location that meets the following conditions.• The location must have a solid floor that can support the weight of the dishwasher. •...

English 18 Installation Installation Cabinet dimensions 575 450 448 550 815 - 845 820 - 870 45 100 50 NOTE Check if the distance between the floor and the bottom of the worktop is more than 850 mm. If so, insert the sub foot included in the installation kit. For details, see the next section. If the...

English 19 Installation STEP 2 To insert the sub foot If the distance between the floor and the bottom of the worktop is more than 850 mm, insert the sub foot into the hole on the bottom of the dishwasher before you start the installation. 850 ~ 1. Lay the dishwasher on its back. CAUTION Do not lay ...

English 20 Installation Installation STEP 4 Arrange the hoses 1. Clean the bottom of the countertop. 2. Attach the protective sticker as shown. 3. Pull the power plug, the water hose, and the drain hose through the sink hole. CAUTION • Use caution not to kink or step on the power plug or the hoses. ...

English 21 Installation STEP 5 Install the custom panel Ø2 ~8 1. Put the installation template on the back of the custom panel and fix it temporarily using transparent tape. Note that the rear of the custom panel will be attached to the dishwasher door. CAUTION • The top end of the custom panel must...

English 24 Installation Installation STEP 6 Level the dishwasher For Built-In models 0-30 mm 20-50 mm Normal Tall-kitchen (Insert the sub foot) 0-30 mm 20-50 mm Normal Tall-kitchen (Insert the sub foot) You can adjust the height of the dishwasher to level it. Note that in these steps, the dishwasher...

English 26 Installation Installation STEP 7 Secure the dishwasher You can use the brackets to secure the dishwasher to the countertop. Alternatively, you can drill the side holes to secure the dishwasher to the cabinet sides. To the countertop using the brackets 1. Insert the provided brackets into ...

English 28 Installation Installation STEP 8 Connect the drain hose Max. 80 cm Min. 30 cm 1. Connect the drain hose to the drain outlet. CAUTION • Install the drain system properly so that the drain hose does not come out of the drain outlet in the draining process. • Make sure that the drain hose, s...

English 29 Installation Skirting board (Not applicable for free standing model) 1. Put the skirting board on the bottom of the dishwasher. 2. Open the door of the dishwasher, and draw a baseline on the skirting board where it interferes with the door. 3. Follow the baseline and cut the skirting boar...

English 30 Befor e you s tar t Before you start Follow these instructions carefully to ensure proper installation of the dishwasher and to prevent accidents when washing dishes. Dishwasher at a glance DW50DG43*B0 NOTE : “ * ” Asterisk(s) means variant model and can be varied (0-9) or (A-Z). 04 05 07...

English 33 Befor e you s tar t CAUTION • Do not wash items that are covered with ash, sand, wax, lubricating grease, or paint. These materials will damage the dishwasher. Ash does not dissolve and will spread inside the dishwasher. • Remove food remains such as bones, fruit seeds, etc. and waste suc...

English 34 Befor e you s tar t Before you start Basic use of racks Height adjustment You can adjust the height of the upper rack so that the lower rack can accommodate larger sized dishes. Depending on the height of the upper rack, the lower rack can accommodate plates up to 29 cm in diameter, and t...

English 35 Befor e you s tar t Upper rack removal CAUTION • Do not operate the dishwasher without the upper rack. Otherwise, noises occur and the dishwasher does not operate properly. • Because the upper rack is removable, insert the upper rack properly to ensure the dishwasher operates normally. Pu...

English 36 Befor e you s tar t Before you start Loading dishes Lower rack We recommend that you place large items, that are difficult to clean (such as pots, pans, lids, serving dishes and bowls), in to the lower rack.It is preferable to place serving dishes and lids on the side of the racks in orde...

English 38 Befor e you s tar t Before you start Cutlery rack (DW50DG45* model only) The cutlery rack is best for flatware and cooking or serving utensils. Use the cutlery rack to organize flatware or utensils. NOTE The cutlery rack can be removed if you need more space on the upper rack to clean lar...

English 39 Befor e you s tar t Filling the detergent 1. Open the detergent dispenser cap by pushing the detergent dispenser catch to the right. NOTE The cap remains open at the end of a cycle. 2. Add the recommended amount of detergent to the main wash detergent compartment. 3. Close the lid by slid...

English 41 Befor e you s tar t Rinse aid reservoir Rinse aid improves the drying performance of the dishwasher. When the Rinse Refill indicator lights up on the control panel, refill with rinse aid. Only use liquid rinse aid.Powdered rinse aid will clog the reservoir opening and cause the dishwasher...

English 42 Befor e you s tar t Before you start Salt storage CAUTION • Use dishwasher-specific salt only. Do not use any other type of salt or solvent. This may damage the salt storage and the water softening system. • To prevent corrosion due to an excessive amount of salt or salty water, always fi...

English 43 Befor e you s tar t Salt indicator The indicator ( ) turns on if there is not enough salt for the next several cycles. Touchpad responsiveness To prevent the touch-enabled controls from losing responsiveness, follow these instructions. • Touch the centre of each button with one finger. • ...

English 44 Befor e you s tar t Before you start Setting mode (For fully built in model : DW50DG45*B00/DW50DG43*B00) You can change the sound, auto door open function, rinse aid level, and water hardness settings to your preference. Entering the Setting mode 1. Turn the dishwasher on. 2. Press and ho...

English 45 Befor e you s tar t Rinse aid level setting You can change the amount of rinse aid applied during a cycle. 1. Press the Sanitize button to select the rinse aid level setting menu. - The display shows the current setting. (Default setting: “d4”) 2. Press the AUTO cycle button to change the...

English 46 Befor e you s tar t Before you start Setting mode (For free standing model : DW50DG45*FSR) You can change the sound, auto door open function, rinse aid level, and water hardness settings to your preference. Entering the Setting mode 1. Turn the dishwasher on. 2. Press and hold the Program...

English 48 Oper ations Operations Control panel DW50DG4**B0 01 02 05 04 03 06 07 09 08 01 POWER Press to turn the dishwasher on or off. 02 Cycle Press to select a desired wash cycle. For more information, see the “ Cycle overview ” section on page 52 . 03 Upper rack only Press to wash items using on...

English 49 Oper ations Indicators No Salt indicator Lights up when the salt storage runs out of salt. Rinse Refill indicator Lights up if the dishwasher runs out of rinse aid. Control Lock indicator Lights up if Control Lock is activated, and blinks if any button except for the POWER button is press...

English 52 Oper ations Operations Cycle overview 01 02 03 04 05 06 01 AUTO This cycle detects the level of soil and automatically initiates the optimal cycle, which is appropriate for all levels of soiled items. 02 ECO This cycle reduces power and water consumption, which is appropriate for normally...

English 53 Oper ations Simple steps to start 1. Open the door, and then load the dishwasher. Make sure to remove food remains and waste on the dishes. 2. Apply detergent to the detergent dispenser. For better results, add rinse aids. 3. Press POWER , and then select a cycle with necessary options ( ...

English 54 Oper ations Operations Salt storage (For fully built in model : DW50DG45*B00/DW50DG43*B00) The water softener is designed to remove minerals and salts from the water, which would have a detrimental or adverse effect on the operation of the appliance. The higher the content of these minera...

English 57 Oper ations Delay Start You can delay the cycle starting time up to 24 hours in 1-hour increments. To increase the delay time, press Delay Start . The hour displayed indicates the time at which the cycle will start. 1. Open the door, and then load the dishwasher. 2. Press Delay Start to c...

English 58 Maint enanc e Maintenance Cleaning Keep the dishwasher clean to improve performance, reduce unnecessary repairs, and lengthen the lifecycle. Exterior Clean spills on the surface of the dishwasher immediately. Use a soft, damp cloth on the control panel to gently wipe away spills and dust....

English 59 Maint enanc e Nozzles To prevent the nozzles from being clogged or if the nozzles are clogged, remove and clean each nozzle. Use caution when removing the nozzles as they may break. Upper nozzle 1. Open the door, and then pull out the upper rack to reveal the upper nozzle. 2. Loosen and r...

English 60 Maint enanc e Maintenance Filter We recommend cleaning the filter every month. 1. Open the door, and then remove the lower rack first. 2. Turn the filter handle counterclockwise to unlock the Coarse filter. 3. Remove the Coarse filter, and then the cylindrical micro filter underneath. DW0...

English 62 Tr ouble shoo ting Troubleshooting Checkpoints If you encounter an issue with the dishwasher, first check the table below and try the suggestions. Symptom Possible cause Action The dishwasher does not start. The door is not completely closed. • Make sure the door is latched and completely...

English 65 Tr ouble shoo ting Information codes If the dishwasher fails to operate, you may see an information code on the display. Check the table below and try the suggestions. Code Action LC Leakage check • Close the water supply valve. Go to your home’s circuit breaker panel, and set the dishwas...

English 66 C y cle char t Cycle chart DW50DG45*FSR / DW50DG45*B00 / DW50DG43*B00 Cycle AUTO ECO Intensive Amount of food remains Very light to heavy Normal Heavy Cycle sequence Pre wash (45 °C)  Main wash (45 °C- 55 °C)  Rinse  Hot rinse (65 °C)  Dry  End Main wash (48 °C)  Rinse  Hot rinse (...

English 67 Appendix Appendix Transportation/relocation Make sure the dishwasher is empty with no loose parts. First, drain the dishwasher as follows. 1. Open the door, and then turn the dishwasher on. 2. Select and run the ECO cycle. 3. Press START , and then close the door. 4. When the cycle is fin...

English 68 Appendix Appendix Specifications MODEL FS(Free Standing) FBI (Fully Built In) DW50DG45*FSR DW50DG45*B00 DW50DG43*B00 Power 220-240 V~, 50 Hz Water pressure 0.04-1.0 MPa Wash capacity 10 place setting 10 place setting 9 place setting Rated power 1760-2100 W Dimension (Width x Depth x Heigh...

English 71 Contact information QUESTIONS OR COMMENTS? COUNTRY CALL OR VISIT US ONLINE AT UK 0333 000 0333 www.samsung.com/uk/support IRELAND (EIRE) 0818 717100 www.samsung.com/ie/support GERMANY 06196 77 555 77 www.samsung.com/de/support FRANCE 01 48 63 00 00 www.samsung.com/fr/support SPAIN 91 175 ...

Memo DW0010_IB_DW4000RM_English.indd 73 2024-06-17 4:40:08

Standard Disassembly Drawings _ 5 2-2. CAP CASE BRAKE / GASKET BRAKE - Cap Case Brake : DD81-02725A / SVC-CAP CASE BRAKE- Gasket Brake : DD81-02726A / SVC-GASKET-BRAKE Part Figure Description CAP CASE BRAKE / GASKET BRAKE A B [DISASSEMBLY] 1. Remove 3 screws that connect left SIDE PANEL to front sid...

6 _ Standard Disassembly Drawings Part Figure Description CAP CASE BRAKE / GASKET BRAKE 4. Take off the left SIDE PANEL. Warning Do not this work without safety gloves. It can cause injury from sharp edge. 5. Take off the CAP CASE BRAKE by rotating to counter- clockwise direction with long-nose plie...

Standard Disassembly Drawings _ 7 2-3. DOOR HINGE - Door Hinge : DD82-01675A, DD82-01676A / SVC ASSY-HINGE-RIGHT, SVC ASSY-HINGE-LEFT Part Figure Description DOOR HINGE B A [DISASSEMBLY] PREPARATION: Remove SIDE PANEL Left & Right refer to the section of ‘CAP CASE BRAKE / GASKET BRAKE’. 1. Remov...

8 _ Standard Disassembly Drawings Part Figure Description DOOR HINGE 4. Remove 2 terminals that connected to DETERGENT DISPENSER, and 1 ground wire that connected to BRACKET DOOR FRAME. Warning Be sure to remove the power plug before servicing. Caution Pay attention to hook of terminals. 5. Remove H...

Standard Disassembly Drawings _ 9 Part Figure Description DOOR HINGE About 15˚ 7. Do same work at the opposite side, and pull out the DOOR INNER assembly to the direction of about 15˚. Warning Do not this work without safety gloves. It can cause injury from sharp edge. 8. Remove 2 screws to take off...

10 _ Standard Disassembly Drawings Part Figure Description DOOR HINGE [ASSEMBLY] 1. Assemble the DOOR HINGE assembly and BRACKET DOOR FRAME with machine screws. - Screws for DOOR HINGE assembly: DD81-02764A / 4 pcs - Screws for BRACKET DOOR FRAME: DD81-02728A / 2 pcs Warning Do not this work without...

Standard Disassembly Drawings _ 11 Part Figure Description DOOR HINGE DW50DG4**F* DW50DG4**B* 5. Connect the wire harness to Sub PBA. Caution Make sure the Wire harness are not getting stuck in other parts. B A 6. Fix 8 screws to assemble the ASSY CONTROL PANEL with Torx® T15 screwdriver. - Type A: ...

12 _ Standard Disassembly Drawings Part Figure Description DOOR HINGE C 8. Fasten 6 screws to fix the DOOR OUTER. NOTE : Use the Torx® T15 screw driver. - Type C: DD81-02757A / 6 pcs

Standard Disassembly Drawings _ 13 2-4. HOLDER HINGE - Holder Hinge : DD81-02763A / SVC-HOLDER HINGE Part Figure Description HOLDER HINGE [DISASSEMBLY] * PREPARATION: Disassemble SIDE PANEL left & right. 1. Remove HOLDER ROPE DOOR from the DOOR HINGE left & right with the DOOR closed. Warnin...

14 _ Standard Disassembly Drawings 2-5. SEAL TUB PACKING - Seal Tub Packing : DD81-02898A / SVC-SEAL TUB PACKING Part Figure Description SEAL TUB PACKING Seal tub packing Bracket seal tub [DISASSEMBLY] 1. Pull out the old seal from the BRACKET SEAL TUB. Warning Be sure to remove the power plug befor...

Standard Disassembly Drawings _ 15 Part Figure Description SEAL TUB PACKING About 3~4 cm 3. Put Seal in the left & right side of the bottom. NOTE : The folded seal is about 3~4 cm long. 4. Press the seal from the top corner toward remaining side. Caution Pay attention to assemble not to deform t...

16 _ Standard Disassembly Drawings 2-6. ROTOR LOWER / ASSY DUCT NOZZLE - Rotor Lower : DD81-02874A / SVC-ROTOR LOWER- Assy Duct Nozzle : DD82-01713A / SVC ASSY-DUCT NOZZLE (DW50DG4**B*, DW50DG4**F*) Part Figure Description ROTOR LOWER / ASSY DUCT NOZZLE [DISASSEMBLY] 1. Open the dishwasher’s DOOR. R...

Standard Disassembly Drawings _ 17 Part Figure Description ROTOR LOWER / ASSY DUCT NOZZLE Duct Nozzle assembly 5. Release the hooks from tub holders. Warning Do not this work without safety gloves. It can cause injury from sharp edge. Caution Make sure to reassemble to correct location. There’re ris...

18 _ Standard Disassembly Drawings Part Figure Description ROTOR LOWER / ASSY DUCT NOZZLE Sump Guide of Holder Bottom of Holder Rib [ASSEMBLY] 1. Put the HOLDER ROTOR LOWER on the SUMP. Caution Pay attention to assemble the HOLDER ROTOR LOWER correctly. There’re risks of leakage or poor performance ...

Standard Disassembly Drawings _ 19 Part Figure Description ROTOR LOWER / ASSY DUCT NOZZLE 2. Assemble the ASSY DUCT NOZZLE to hooks and on the HOLDER ROTOR LOWER. Warning Do not this work without safety gloves. It can cause injury from sharp edge. Caution Make sure to reassemble to correct location....

20 _ Standard Disassembly Drawings 2-7. ASSY ROTOR MIDDLE - Assy Rotor Middle : DD82-01715A / SVC ASSY-ROTOR MIDDLE Part Figure Description ASSY ROTOR MIDDLE [DISASSEMBLY] 1. Open the dishwasher’s DOOR, and take off the BASKET MIDDLE. 2. Release 2 hooks to take off ASSY ROTOR MIDDLE from the BASKET ...

Standard Disassembly Drawings _ 21 2-8. COARSE FILTER / FINE FILTER / MICRO FILTER - Coarse Filter : DD81-02452A / SVC-FILTER COARSE- Fine Filter : DD81-02873A / SVC-FILTER FINE- Micro Filter : DD81-02453A / SVC-FILTER MICRO Part Figure Description COARSE FILTER / FINE FILTER / MICRO FILTER [DISASSE...

22 _ Standard Disassembly Drawings 2-9. BASKET MIDDLE / ASSY ADJUSTER / BRACKET ADJUSTER - Basket Middle : DD82-02244* / SVC ASSY-BASKET MIDDLE (DW50DG4**F*/DW50DG45*B*) DD82-02256* / SVC ASSY-BASKET MIDDLE (DW50DG43*B*) - Assy Adjuster : DD82-01719A, DD82-01720A / SVC ASSY-ADJUSTER-L, R (DW50DG4**B...

Standard Disassembly Drawings _ 23 2-10. BASKET LOWER - Basket Lower : DD82-02259A / SVC ASSY-BASKET LOWER Part Figure Description BASKET LOWER [DISASSEMBLY] 1. Open the dishwasher’s DOOR, and take off the BASKET LOWER. 2. Release 2 screws to take off HANDLE BASKET. - Screws: DD81-02901A 2 pcs 3. Re...

24 _ Standard Disassembly Drawings 2-11. BASKET 3 rd - Basket 3 rd : DD82-02246A / SVC ASSY-BASKET 3RD (DW50DG4**F* /DW50DG45*B*) Part Figure Description BASKET 3 rd (DW50DG4**F* / DW50DG45*B*) [DISASSEMBLY] 1. Open the dishwasher’s door, and take off the BASKET 3 rd from the RAIL BASKET. 2. When yo...

Standard Disassembly Drawings _ 25 2-12. RAIL BASKET / HOLDER RAIL REAR - Rail Basket : DD81-02766A, DD81-02767A / SVC-RAIL MID-LEFT, RIGHT (All models) DD81-02958A, DD81-02959A / SVC-RAIL 3RD-LEFT, RIGHT (DW50DG4**F* /DW50DG45*B*) - Holder Rail Rear : DD81-02768A / SVC-HOLDER-RAIL MIDDLE REAR (All ...

26 _ Standard Disassembly Drawings 2-13. BASKET CUTLERY - Basket Cutlery : DD81-02924A / SVC-BASKET CUTLERY (DW50DG43*B*) Part Figure Description BASKET CUTLERY [DISASSEMBLY/ASSEMBLY] This part will be serviced by assembly part only.

Standard Disassembly Drawings _ 27 2-14. CAP SOFTENER - Cap Softener: DD81-02918A / SVC-TANK WATER-SOFTENER-CAP Part Figure Description CAP SOFTENER Cap Softener [DISASSEMBLY] 1. Release the cap of softener by rotating to counter- clockwise. [REASSEMBLY] 1. Reassembly is the reverse order of disasse...

28 _ Checkpoints After Finishing A Service 3. CHECKPOINTS AFTER FINISHING A SERVICE 1. Check the safety device Check the operation of the door lock switch. Make sure that it is locked while the dishwasher is running and that it is unlocked when the dishwasher stops. 2. Use authenticated parts only I...

© 2024 Samsung Electronics Co.,Ltd. All rights reserved.Printed in Korea GSPN (GLOBAL SERVICE PARTNER NETWORK) Area Web Site Eurpoe, CIS, Mideast & africa gspn1.samsungcsportal.com Asia gspn2.samsungcsportal.com North & Latin America gspn3.samsungcsportal.com China china.samsungportal.com Th...