Samsung C43J892DKU - Manuals

6 Warning • DO NOT PLACE CANDLES, INSECT REPELLANTS OR CIGARETTES ON TOP OF THE PRODUCT. DO NOT INSTALL THE PRODUCT NEAR HEAT SOURCES. • Do not install the product in poorly ventilated spaces such as a bookcase or closet. • Install the product at least 10 cm away from the wall to allow ventilation. ...

7 Warning • There is a high voltage inside the product. Never disassemble, repair or modify the product yourself. ‒ Contact Samsung Customer Service Center for repairs. • To move the product, first disconnect all the cables from it, including the power cable. • If the product generates abnormal soun...

8 Caution • Leaving the screen fixed on a stationary image for an extended period of time may cause afterimage burn-in or defective pixels. ‒ Activate power-saving mode or a moving-picture screen saver if you will not be using the product for an extended period of time. • Disconnect the power cord f...

9 Preparations Chapter 02 Parts Control Panel ― The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Function Key Guide Power LED LEFT JOG Button RIGHT UP(REAR) DOWN(FRONT) Shortcut Key PRESS(ENTER) PBP/PIP Source Switch ...

10 Icons Description Power LED This LED is power status indicator and works as • Power On (Power button): Off • Power saving mode: Blinking • Power Off (Power button): On ― The power Indicator operation can be swapped by changing in the menu. ( System → Power LED On ) Actual models because of functi...

13 Changing Brightness, Contrast and Eye Saver Mode settings You can adjust Brightness , Contrast or Eye Saver Mode by moving the JOG button up or down, if no OSD menu is displayed. Eye Saver Mode Brightness Contrast Off ― The displayed image may differ depending on the model. ― The default brightne...

14 Types of Ports ― The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. POWER IN Port Description POWER IN Connect the power cord for your monitor to the POWER IN port on the back of the product. Connects to a source dev...

15 Upgrading the Software via USB 1 Be sure to insert the USB disk into the USB port marked out with the blue box as shown in the figure below. You can upgrade the software via USB only if either the monitor screen operates normally or the check signal is displayed on the monitor screen. USB Check S...

16 Note 1 Before upgrading through USB disk, you need to format the USB disk into the FAT32 format. 2 Make sure only the BIN file for upgrade is in the USB disk. 3 For the CJ89 model, make sure each upgrade file is in the BIN formate and follow the naming rules of CJ89 (m-J89**CGAA-****.*[4-digit nu...

17 Adjusting the Product Tilt and Height ― The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. -15.0° (±2.0°) to Left ~ 15.0° (±2.0°) to Right C43J890DK* / C43J892DK*: -2.0° (±2.0°) ~ 17.0° (±2.0°)C49J890DK* / C49J892DK*...

27 Connecting and Using a Source Device Chapter 03 Read below before installing the monitor. 1 Check the shapes of both ends of the cables that came with the monitor, and check the shapes and positions of the matching ports on the monitor and external devices. 2 Before connecting signal cables, disc...

29 Connecting to Headphones Connecting the Product to a Source Device as a USB Hub Connecting a Source Device to the Product ― The product can function as a USB hub when it is connected to a source device via a USB Type-C cable or USB Type-C to A cable. Then you can connect USB devices to the produc...

30 Utilizing the Product as a USB HUB Using the product as a hub, connect and use various source devices with the product at the same time.A source device cannot connect to multiple devices at the same time if it has a limited number of available input/output ports. In this case, the hub feature of ...

31 Connecting the Power POWER IN To use the product, connect the power cable to a power outlet and the POWER IN port on the product. ― The input voltage is switched automatically.

32 Tidying Up the Connected Cables : Headphones hanger : Downward : Upward 1 2 3 4 5 Connect the corresponding cables. Arrange the cables against the bend tendency of the cables and pull the cables out of the COVER-REAR SUB grooves. Hang the HOLDER-CABLE in the direction as shown in the figure. Arra...

33 Correct posture to use the product Use the product in the correct posture as follows: • Straighten your back. • Allow a distance of 45 to 50cm between your eye and the screen, and look slightly downward at the screen. • Keep your eyes directly in front of the screen. • Adjust the angle so light d...

34 Picture A detailed description of each function is provided. Refer to your product for details. Chapter 04 ― The functions available may vary depending on the product model. The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve ...

35 Brightness You can adjust the general brightness of the picture. (Range: 0~100)A higher value will make the picture appear brighter. ― This menu is not available when Smart ECO Saving is enabled. ― This menu is not available when Eye Saver Mode is enabled. Contrast Adjust the contrast between the...

36 SAMSUNG MAGIC Upscale SAMSUNG M A G I C Upscale function can enhance the layers of the picture details and the vividness of the picture. The function has more obvious effects on low-resolution pictures. ― This menu is not available when SAMSUNG M A G I C Bright is set to Cinema mode. ― Not availa...

37 Picture Size Change the picture size. ― This menu is not available when PIP/PBP Mode is set to On and the Size is set to (PBP Mode). In PC mode • Auto : Display the picture according to the aspect ratio of the input source. • Wide : Display the picture in full screen regardless of the aspect rati...

39 Size Select the size and aspect ratio of the sub-screen.C43J890DK* / C43J892DK* • : Select the icon image if you want to use PBP mode where the optimum resolution for the left and right sides of the screen is 1920 x 1200 (width x height). • : Select the icon image if you want to use PIP mode wher...

40 Position Select the position of the sub-screen from the available options. • / / / ― Not available when PBP is selected. ― The screen may flicker if the input signal is unstable. Sound Source Set which screen you want to hear the sound for. PIP mode / PBP mode / Source Select the source for each ...

41 Switch USB DP IN HDMI IN PC Monitor Laptop PC Screen Laptop/Mobile Phone Screen HDMI Cable USB Cable DP Cable USB Type-C Cable The KVM (keyboard, video, and mouse) switch enables users to use only a keyboard, a video monitor, and a mouse for controlling multiple input sources.The function of the ...

42 Picture Size PIP Mode (available in PIP mode ( Size / )) Select the image size for sub-screen. In PC mode • Auto : Display the picture according to the aspect ratio of the each screen input source. • Wide : Display the picture in full screen regardless of the aspect ratio of the each screen input...

44 OnScreen Display A detailed description of each function is provided. Refer to your product for details. Chapter 06 ― The functions available may vary depending on the product model. The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to...

45 System A detailed description of each function is provided. Refer to your product for details. Chapter 07 ― The functions available may vary depending on the product model. The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve q...

46 Smart ECO Saving The Smart ECO Saving function reduces power consumption by controlling the electric current used by the monitor panel. ― This menu is not available when Eye Saver Mode is enabled. • Off : Deactivate the Smart ECO Saving function. • On : The power consumption will automatically be...

47 Source Detection Select either Auto or Manual as the method to recognize input signal. Key Repeat Time Control the response rate of a button when the button is pressed. Acceleration , 1 sec , or 2 sec can be selected. If No Repeat is selected, a command responds only once when a button is pressed...

48 Installing the Software Chapter 08 Easy Setting Box Easy Setting Box enables users to use the monitor by partitioning multiple sections. To install the latest version of Easy Setting Box , download it from the Samsung Electronics website at http://www.samsung.com. ― The software may not work prop...

49 Troubleshooting Guide Chapter 09 Requirements Before Contacting Samsung Customer Service Center ― Before calling Samsung Customer Service Center, test your product as follows. If the problem persists, contact Samsung Customer Service Center. Testing the Product Check if your product is operating ...

53 Specifications Chapter 10 General Model Name C43J890DK* / C43J892DK* C49J890DK* / C49J892DK* Size 43 Class (43.4 Inches / 110.2 cm) 49 Class (48.9 Inches / 124.2 cm) Display area 1052.3 mm (H) x 328.8 mm (V)41.4 Inches (H) x 12.9 Inches (V) 1195.8 mm (H) x 336.3 mm (V)47.1 Inches (H) x 13.2 Inche...

57 Appendix Chapter 11 Responsibility for the Pay Service (Cost to Customers) ― When the service is requested, in spite of in warranty, we may charge you for a visit from a service technician in the following cases. Not a product defect Cleaning of the product, Adjustment, Explanation, Re-installati...

58 Extended warranty You can buy an extended warranty within 90 days of purchasing the product.The extended warranty will cover an additional period of 3 years, beyond the standard 3 year warranty.Samsung guarantee that replacement parts will be available for 5 years after the end of production.Afte...