Ryobi P203- Manuals

6 SYMBOLS SERvICE Servicing requires extreme care and knowledge and should be performed only by a qualified service technician. For service we suggest you return the product to the nearest A U T H O R I Z E D S E R v I C E C E N T E R f o r re p a i r. W h e n servicing, use only identical replaceme...

7 FEATURES Fig. 1 PRODUCT SPECIFICATIONS Chuck ...........................................................1/ in. KeylessMotor ......................................................................18 V DCSwitch .............................. VSR (Variable Speed Reversible) No Load Speed ................

9 OPERATION WARNING: Do not allow familiarity with products to make you careless. Remember that a careless fraction of a second is sufficient to inflict serious injury. WARNING: Always wear safety goggles or safety glasses with side shields when operating products. Failure to do so could result in o...

10 OPERATION Fig. 4 unloCK (release) loCK (tighten) Keyless ChuCK ChuCK jaws reverse direCtion oF rotation seleCtor (Forward/reverse/Center loCK) Forward Fig. 3 switCh trigger SWITCH TRIGGER See Figure 3. To turn the drill ON, depress the switch trigger. To turn it OFF, release the switch trigger. v...

11 Fig. 5 OPERATION TWO-SPEED GEAR TRAIN (HI-LO) See Figure 5. The drill has a two-speed gear train designed for drilling or driving at LO (1) or HI (2) speeds. A slide switch is located on top of the drill to select either LO (1) or HI (2) speed. When using drill in the LO (1) speed range, speed wi...

1 OPERATION BIT STORAGE See Figure 7. When not in use, bits provided with the drill can be placed in the storage area located on the top of motor housing. MAG TRAY ™ (SCREW HOLDER) See Figure 7. The magnetic tray conveniently stores screws or other small parts. INSTALLING BITS See Figures 8 - 9.  L...

14 MAINTENANCE BATTERY PACK REMOvAL AND PREPARATION FOR RECYCLING To preserve natural resources, please r e c y c l e o r d i s p o s e o f b a t t e r i e s properly.This product uses nickel-cadmium and lithium-ion batteries. Local, state or federal laws may prohibit disposal of batteries in ordina...

15 MAINTENANCE CHUCK REMOvAL See Figures 11 - 13. The chuck may be removed and replaced by a new one.  Lock the switch trigger by placing the direction of rotation selector in center position.  Insert a 5/16 in. or larger hex key into the chuck of the drill and tighten the chuck jaws securely.  T...

16 P03 987000-1744-11-08 (REV:03) • PARTS AND SERVICE Prior to requesting service or purchasing replacement parts, please obtain your model and serial number from the product data plate. • MODEL NUMBER • SERIAL NUMBER • HOW TO OBTAIN REPLACEMENT PARTS: Replacement parts can be purchased online at ww...