Ryobi P203- User Manual

Page 3 - GENERAL SAFETY RULES; ELECTRICAL SAFETY; POWER TOOL USE AND CARE

3 GENERAL SAFETY RULES WARNING! Read all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. The term “power tool” in all of the warnings listed below refers to your mains-operated (corded) power tool or battery-operated (cordless) ...

Page 4 - BATTERY TOOL USE AND CARE

4 GENERAL SAFETY RULES SPECIFIC SAFETY RULES  Use the power tool, accessories and tool bits etc., in accordance with these instructions and in the manner intended for the particular type of power tool, taking into account the working conditions and the work to be performed. Use of the power tool fo...

Page 5 - SYMBOLS; SYMBOL

5 SYMBOLS Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper inter-pretation of these symbols will allow you to operate the product better and safer. SYMBOL NAME DESIGNATION/EXPLANATION V Volts Voltage A Amperes Current Hz Hertz Frequency (cy...

Page 6 - SERvICE; SAvE THESE INSTRUCTIONS

6 SYMBOLS SERvICE Servicing requires extreme care and knowledge and should be performed only by a qualified service technician. For service we suggest you return the product to the nearest A U T H O R I Z E D S E R v I C E C E N T E R f o r re p a i r. W h e n servicing, use only identical replaceme...

Page 7 - FEATURES; PRODUCT SPECIFICATIONS

7 FEATURES Fig. 1 PRODUCT SPECIFICATIONS Chuck ...........................................................1/ in. KeylessMotor ......................................................................18 V DCSwitch .............................. VSR (Variable Speed Reversible) No Load Speed ................

Page 9 - OPERATION; APPLICATIONS

9 OPERATION WARNING: Do not allow familiarity with products to make you careless. Remember that a careless fraction of a second is sufficient to inflict serious injury. WARNING: Always wear safety goggles or safety glasses with side shields when operating products. Failure to do so could result in o...

Page 10 - reverse; SWITCH TRIGGER; vARIABLE SPEED

10 OPERATION Fig. 4 unloCK (release) loCK (tighten) Keyless ChuCK ChuCK jaws reverse direCtion oF rotation seleCtor (Forward/reverse/Center loCK) Forward Fig. 3 switCh trigger SWITCH TRIGGER See Figure 3. To turn the drill ON, depress the switch trigger. To turn it OFF, release the switch trigger. v...

Page 11 - ADJUSTABLE TORQUE CLUTCH

11 Fig. 5 OPERATION TWO-SPEED GEAR TRAIN (HI-LO) See Figure 5. The drill has a two-speed gear train designed for drilling or driving at LO (1) or HI (2) speeds. A slide switch is located on top of the drill to select either LO (1) or HI (2) speed. When using drill in the LO (1) speed range, speed wi...

Page 12 - BIT STORAGE; REMOvING BITS

1 OPERATION BIT STORAGE See Figure 7. When not in use, bits provided with the drill can be placed in the storage area located on the top of motor housing. MAG TRAY ™ (SCREW HOLDER) See Figure 7. The magnetic tray conveniently stores screws or other small parts. INSTALLING BITS See Figures 8 - 9.  L...

Page 14 - MAINTENANCE; BATTERIES

14 MAINTENANCE BATTERY PACK REMOvAL AND PREPARATION FOR RECYCLING To preserve natural resources, please r e c y c l e o r d i s p o s e o f b a t t e r i e s properly.This product uses nickel-cadmium and lithium-ion batteries. Local, state or federal laws may prohibit disposal of batteries in ordina...

Page 15 - CHUCK REMOvAL; TO RETIGHTEN A LOOSE CHUCK

15 MAINTENANCE CHUCK REMOvAL See Figures 11 - 13. The chuck may be removed and replaced by a new one.  Lock the switch trigger by placing the direction of rotation selector in center position.  Insert a 5/16 in. or larger hex key into the chuck of the drill and tighten the chuck jaws securely.  T...

Page 16 - PARTS AND SERVICE; • MODEL NUMBER; HOW TO OBTAIN REPLACEMENT PARTS:; Replacement parts can be purchased online at; HOW TO LOCATE AN AUTHORIZED SERVICE CENTER:; Authorized Service Centers can be located online at; HOW TO OBTAIN CUSTOMER OR TECHNICAL SUPPORT:; OPERATOR’S MANUAL

16 P03 987000-1744-11-08 (REV:03) • PARTS AND SERVICE Prior to requesting service or purchasing replacement parts, please obtain your model and serial number from the product data plate. • MODEL NUMBER • SERIAL NUMBER • HOW TO OBTAIN REPLACEMENT PARTS: Replacement parts can be purchased online at ww...

Table of Contents:

Summary

Other Ryobi Models