Page 2 - Warranty Against Defects
Spectrum Brands Australia Pty Ltd Locked Bag 3004 BraesideVictoria 3195 Australia Customer Service in Australia Toll Free: 1800 623 118 Email: [email protected] Website: www.spectrumbrands.com.au Spectrum Brands New Zealand Ltd PO Box 9817 NewmarketAuckland 1149 New Zealand Customer Service in New Z...
Page 4 - INSTRUCTIONS; and keep it for future reference.; Pass it on if you pass on the appliance.; Components; Function Introduction:
4 INSTRUCTIONS Congratulations on the purchase of your appliance. Each unit is manufactured to ensure safety and reliability. Before using the appliance for the first time, please read the instruction booklet carefully and keep it for future reference. Pass it on if you pass on the appliance. When u...
Page 6 - BATTERY INSTALLATION AND REPLACEMENT; Installing and replacing the rechargeable battery:; IMPORTANT; they are not correctly aligned.; or; OFF; QUICK START GUIDE
6 BATTERY INSTALLATION AND REPLACEMENT Installing and replacing the rechargeable battery: 1. Place the robotic vacuum cleaner upside down on a flat stable surface.2. Using the screwdriver provided, remove the screws on the battery cover. (Refer to Figure 1)3. Lift the battery cover away from the uni...
Page 7 - rechargeable batteries for this vacuum.; Old batteries should be recycled safely.; the cleaner is not in use.; Battery Replacement & Installment; the cleaner is not in use.
7 IMPORTANT: When not in use, keep the vacuum on charge to get the best performance from the battery. Alternatively, switch the Power switch to the “OFF” position when not in use. IMPORTANT : Only use the rechargeable battery recommended for R-Vac. Do not use any other rechargeable batteries for thi...
Page 8 - The vacuum will charge when the Power switch is in the ON; The power indicator will flash when the vacuum is charging.; FUNCTIONS; The power indicator with flash when the vacuum is charging.
8 CHARGING YOUR R-Vac Manual charge: 1. Manually place the vacuum on charge - there are 2 manual charging options: a. Using the adapter only, plugged directly into the DC socket (located next to the ON/OFF switch), or b. With the adapter connected to the charging station, place vacuum onto the charg...
Page 9 - from the charging station.; Press the AUTO button to let R-Vac start cleaning.; CHARGE button; Ensure you have the Charging Station set up.
9 The following function buttons (AUTO, SPOT & CHARGE) are located on the control panel on top of the R-Vac and will only operate when the R-Vac is not located on the charging station. For general daily use, we recommend using the remote control to start the R-Vac from the charging station. AUTO...
Page 10 - REMOTE CONTROL: BATTERY INSTALLATION & REPLACEMENT; Ensure the batteries are installed in your remote control.; If your remote control isn’t operating correctly; , it may be necessary to re-synchronise
10 REMOTE CONTROL & PROGRAMMING: The Remote control is synchronised with your vacuum cleaner prior to purchase. REMOTE CONTROL: BATTERY INSTALLATION & REPLACEMENT 1. Open the cover on the back of the Remote control.2. Insert AAA batteries (not included) with correct polarity as marked (+/-)....
Page 11 - To set the current weekday:; SCHEDULE/PROGRAM YOUR VACUUM; The numbers at the top of the screen represent days of the week:
11 FUNCTIONS OF THE REMOTE CONTROL:To set the current time: NOTE: The remote control uses 24 Hour time only. During set up, press the button to quit at any time. To set the correct time - 1. Press the “TIMER” button.2. The 1 st ‘time’ digit will flash. Use the “ ˄ ” and “ ˅ ” to change the number. 3...
Page 12 - NOTE: Underlined numbers represent days that are scheduled.; release the code check button, then the code
12 5. Press the “SET” button, then press “<”. 6. The square around a number at the top of the screen will then begin to flash.7. Press the “ ˄ ” and “ ˅ ” buttons to scroll through the weekdays. 8. Select the days you would like to schedule your vacuum to clean by pressing the “OK” button; this w...
Page 13 - SPACE ISOLATOR: BATTERY INSTALLATION & REPLACEMENT; If your space isolator isn’t operating correctly; , it may be necessary to re-synchronise it with; Positioning your Space Isolator
13 SPACE ISOLATOR: BATTERY INSTALLATION & REPLACEMENT 1. Open the cover on the base of the Space Isolator.2. Insert AA batteries (not included) with correct polarity (+/-).3. Replace the cover on the base of the Space Isolator. IMPORTANT: Remove the batteries if the Space Isolator will not be us...
Page 14 - CHARGING STATION; Docking Station; indicator; on the right and left.; Figure 1
14 CHARGING STATION ： Docking Station ： LED indicator Infrared signal transmittingwindow Internal synchronise button (on back of charging station) Charging electrodeDC socket Figure 2 The Charging Station is synchronised with your vacuum cleaner prior to purchase. Automatic Charging: 1. Position the...
Page 15 - vacuum, making it difficult for the cleaner to dock and charge.; If your charging station isn’t operating correctly; REMOVING AND REPLACING THE DUST BIN:; and extract the bin by pulling
15 4. Place your R-Vac on the charging station with the silver auto-charging electrodes on the front of the R-Vac in contact with the silver charging electrodes on the charging station. IMPORTANT: Place the charging station securely against the wall, or it might be moved by the vacuum, making it dif...
Page 16 - CLEANING THE DUST BIN:; bin to release the gate.; Slide Clip; Figure 4
16 CLEANING THE DUST BIN: 1. Remove the dust bin.2. Press the two side clips (see Figure 1) on the dust bin to release the gate. 3. Push the gate open and pour out the dust.4. Push on the rubber strip to open the clear cover. Pour out the dust. 5. If required, dust the insides of the bin with the br...
Page 17 - Reinstall the filter in the original position.; CLEANING THE MAIN BRUSH AND FLOOR BRUSH:; PROLONG THE LIFE OF YOUR; Lift the main brush & floor brush up and away from the; correctly located into their corresponding recesses.
17 3. Reinstall the filter in the original position. Tip: The rubber cleaning head may fall off when you clean the dust bin. Reinstall as shown below: 1. Position the dustbin and rubber cleaning head as per Figure 1.2. Place one end of the cleaning head onto the clear cover of the dust bin, make sur...
Page 18 - REMOVING, REPLACING AND CLEANING UNDER THE SIDE BRUSH:; TROUBLE SHOOTING: Error codes will appear on the remote control; ERROR; Middle brush; REMOVING, REPLACING AND CLEANING THE FRONT WHEEL:
18 REMOVING, REPLACING AND CLEANING UNDER THE SIDE BRUSH: 1. Using a screw driver, release the screw in the main shaft of the side brush. (see Figure 4)2. Remove the side brush and clean the cavity with the dust cleaning brush.3. Place the side brush back into position and refit the screw. Rubber cl...
