Rotel RLC-1080 - Manuals - manualsarea.com

Page 2 - Important Safety Information

2 RLC-1080 Power Conditioner Place the unit on a fixed, level surface strong enough to support its weight. Do not place it on a moveable cart that could tip over. Important Safety Information WARNING: There are no user serviceable parts inside. Refer all servicing to qualified service personnel.WARN...

Page 3 - English

3 English � � � � � � � � � � � � � � � Front and Rear Panel Controls and Connections � � � � � � � � � � � �

Page 4 - About Rotel; qw

4 RLC-1080 Power Conditioner About Rotel A family whose passionate interest in music led them to manufacture high ﬁdelity components of uncompromising quality founded Rotel over 45 years ago. Over the years that passion has remained undiminished and the goal of provid-ing exceptional value for audio...

Page 5 - A Few Precautions

5 English Features • Pure Sine Wave Battery Backup - The RLC-1080 provides battery backup power to maintain pure, uninterrupted power for your home theater and automation systems in the event of a power blackout. Battery backup power not only prevents interruptions in your entertainment, it also pre...

Page 6 - Front Panel

6 RLC-1080 Power Conditioner Front Panel See the illustration on page 3. ON BATTERY Status Indicator 1 When lit (orange), the RLC-1080 is operating on power from the internal Battery Pack. The unit will go “On Batter y” when the voltage from the wall outlet has either dropped below or gone above the...

Page 7 - Rear Panel

7 English Rear Panel See the illustration on page 3. AC-Power Outlets r The RLC-1080 Power Conditioner provides for connection of up to twelve (12) components. The outlets are arranged according to the type of filtering protection provided for a given component type. These Isolated Noise Filter Bank...

Page 8 - Installation; Connecting the Battery

8 RLC-1080 Power Conditioner Installation Placement Caution: The RLC-1080 weighs approxi- mately 60 pounds. Two-people should work together when the unit is being moved. Lift the RLC-1080 carefully by firmly grasping both sides of unit in the middle. Failure to use caution and proper procedures when...

Page 9 - Information Screens

9 English SELFTEST IS ON; ON-LINE SELFTEST screen shows that an On-Line Selftest is ac- tive. �� SELFTEST IS ON; ON-BATTERY SELF-TEST screen shows that an On-Battery Selftest is active with the unit internally switched to power from the internal battery pack, which shoul...

Page 10 - Connecting the Components

10 RLC-1080 Power Conditioner Model Number and Serial Number Screen This screen displays the model number and serial number of your unit. Please have this information available any time you need to talk with Rotel Technical Support, as well. �� Internet Address Screen ...

Page 12 - Troubleshooting

12 RLC-1080 Power Conditioner DO RUNTIME CAL Screen This lets you manually initiate a Runtime Calcu- lation test to calibrate the internal measurements which should result in more accurate runtime estimates. This only needs to be done once every 6 months, or if the load connected to the RLC-1080 cha...

Page 13 - Limited Warranty

13 English Connected equipment reboots or turns off when the RLC-1080 switches to battery power. Possible Cause: Battery was disconnected after unit was installed and powered on. Solution: If the batter y is disconnected a warning appears in the VFD display. Remove the front bezel by grasping the si...

Page 14 - Specifications

14 RLC-1080 Power Conditioner Speciﬁcations INPUT Voltage Range for Operation on Utility 90V – 144V Nominal Voltage 120 VAC Allowable Frequency for Operation on Utility 47 – 63 Hz Rated Input Current 12 Amps Circuit Breaker Rating 15 Amps OUTPUT Number of Outlets 12 (all outlets are surge protected,...