Rosewill RX358 - Manuals - manualsarea.com

Page 2 - Hardware Assembly Guide

3.5" SATA HDD to USB & eSATA Ext. Enclosure w/Int.80mm fan [ RX358 Series ] User Manual 1 FEATURES • Support up to 1000GB • Front Panel Light beam affiliated Power ON/OFF switch • Power On/Off for internal cooling fan • OS Supports Win2000/ME/XP/VISTA, and Mac OS 8.6/9.x/10.x and above and L...

Page 3 - Enclosure Figure Description; Front View; E F

3.5" SATA HDD to USB & eSATA Ext. Enclosure w/Int.80mm fan [ RX358 Series ] User Manual 2 Enclosure Figure Description Front View A B Rear View C G D E F A. Ventilation design 1 B. Ventilation design 2 C. Fan Switch D. Power Switch E. Power Jack F. USB Port G. eSATA Port

Page 4 - User Assembly Guide; Release the 4 screws, and then remove the bottom

3.5" SATA HDD to USB & eSATA Ext. Enclosure w/Int.80mm fan [ RX358 Series ] User Manual 3 User Assembly Guide z Please follow the instructions and make sure your HDD is successfully installed to the mobile disk! STEP1: Release the 4 screws, and then remove the bottom aluminum cover.

Page 5 - Release 2 screws from back panel, and then slide out the

3.5" SATA HDD to USB & eSATA Ext. Enclosure w/Int.80mm fan [ RX358 Series ] User Manual 4 STEP2: Release 2 screws from back panel, and then slide out the side plates. STEP3: Place HDD into the enclosure properly. Connect HDD to SATA connector.

Page 6 - Tight up 4 screws from side to side.

3.5" SATA HDD to USB & eSATA Ext. Enclosure w/Int.80mm fan [ RX358 Series ] User Manual 5 STEP4: Tight up 4 screws from side to side. STEP5: Reassemble two side plates back to the enclosure and fix the screws.

Page 7 - Replace the aluminum cover back and tight up 4 screws.; Attention

3.5" SATA HDD to USB & eSATA Ext. Enclosure w/Int.80mm fan [ RX358 Series ] User Manual 6 STEP6: Replace the aluminum cover back and tight up 4 screws. Attention 1. Make sure HDD does not dash the leaves of fan during assembly. 2. Please leave at least 5cm from air intake ventilator.

Page 8 - HDD Formatting Guide; You may format your external HDD through USB2.0 connection.

3.5" SATA HDD to USB & eSATA Ext. Enclosure w/Int.80mm fan [ RX358 Series ] User Manual 7 HDD Formatting Guide z You may format your external HDD through USB2.0 connection. z Please make sure your external HDD is turned on and well connected to the PC before formatting the HDD. STEP1: Right-...

Page 9 - Right-click on the “Unallocated” blocks and selects “New

3.5" SATA HDD to USB & eSATA Ext. Enclosure w/Int.80mm fan [ RX358 Series ] User Manual 8 STEP3: Right-click on the “Unallocated” blocks and selects “New Partition”. STEP4: The “New Partition Wizard” will appear. Please follow the instruction of the wizard to complete.

Page 10 - When new partition is completed, the external HDD will be

3.5" SATA HDD to USB & eSATA Ext. Enclosure w/Int.80mm fan [ RX358 Series ] User Manual 9 STEP5: When new partition is completed, the external HDD will be recognized as a “New Volume”. STEP6: Double-click “My Computer”. You will see the new volume appears on your PC.

Page 11 - Questio; Does this SATA enclosure support hot swap?; Answe; Yes, but it depends on the motherboard you have.

3.5" SATA HDD to USB & eSATA Ext. Enclosure w/Int.80mm fan [ RX358 Series ] User Manual 10 NOTICE Questio n： Does this SATA enclosure support hot swap? Answe r： Yes, but it depends on the motherboard you have. 1. If your motherboard has an eSATA port in the Back I/O Connectors Panel as shown...