Rosewill RNX-G300EXLX - Manuals

Rosewill RNX-G300EXLX – Manual in PDF format online.

Manuals:

Manual

Manual Rosewill RNX-G300EXLX

100

101

102

103

104

105

106

107

108

109

110

111

Summary

Page 2 - CONTENT

Wireless Adapter RNX-G300EX/LX User Manual - 1 - CONTENT Introduction ....................................................................................................................................... - 2 - Specifications ............................................................................

Page 3 - INTRODUCTION

Wireless Adapter RNX-G300EX/LX User Manual - 2 - INTRODUCTION Thank you for purchasing Wireless LAN PCI Card. Wireless card is a perfect combination product of performance and cost-effectiveness. It is sincerely hoped that you can enjoy the wireless world through this solidly profiled wireless card....

Page 4 - SPECIFICATIONS

Wireless Adapter RNX-G300EX/LX User Manual - 3 - SPECIFICATIONS Interface PCI Standard 802.11b, 802.11g OS support 98SE, WinME, Win2000, WinXP32, WinXP64, Vista32, Vista64 Data rate 1,2,5.5,11,6,8,12,18,24,36,48,54Mbps, depends on the wireless mode Frequency band BG:2.4 ~ 2.497 GHz Operation Channel...

Page 5 - INSTALLATION; HARDWARE INSTALLATION

Wireless Adapter RNX-G300EX/LX User Manual - 4 - INSTALLATION HARDWARE INSTALLATION 1. Turn off your PC and remove the cover. 2. Insert the RNX-G300EX/ LX to an available PCI slot firmly. 3. Secure this card to the rear of the computer chassis 4. Put back the cover. 4. Fix the antenna to the antenna...

Page 6 - SOFTWARE INSTALLATION (FOR ALL WINDOWS OS)

Wireless Adapter RNX-G300EX/LX User Manual - 5 - SOFTWARE INSTALLATION (FOR ALL WINDOWS OS) After hardware installation complete, system will detect new hardware automatically as below: Found New Hardware Wizard window pops up, click Cancel . Insert the driver disk into your DVD-ROM. Click My Comput...

Page 10 - SOFTWARE UNINSTALL

Wireless Adapter RNX-G300EX/LX User Manual - 9 - SOFTWARE UNINSTALL Click My Computer icon, then click Add or Remove Program icon, and then click Ralink Wireless LAN icon and then click Remove icon. Click Yes, I want to restart my computer now icon, and then Finish icon.

Page 13 - USE WZC TO CONFIGURE WIRELESS NIC

Wireless Adapter RNX-G300EX/LX User Manual - 12 - USE WZC TO CONFIGURE WIRELESS NIC A. If connection is lost or not connected, the status prompt as Figure 1-4 will pop up. Figure 1-4 status prompt of no connection B. Right-click the network connection icon in task bar. Figure 1-5 Select WZC main sta...

Page 20 - START RAUI

Wireless Adapter RNX-G300EX/LX User Manual - 19 - START RAUI When starting RaUI, system will connect to the AP with best signal strength without setting profile or matching profile setting. When starting RaUI, it will issue a scan command to wireless NIC. After two seconds, the AP list will updated ...

Page 27 - PROFILE

Wireless Adapter RNX-G300EX/LX User Manual - 26 - Besides, the small icon will change color to reflect current wireless network connection status. The status indicates as follow: : Indicate Connected and Signal Strength is Good. : Indicate Connected and Signal Strength is Normal. : Indicated not con...

Page 31 - EXAMPLE TO ADD PROFILE IN PROFILE

Wireless Adapter RNX-G300EX/LX User Manual - 30 - EXAMPLE TO ADD PROFILE IN PROFILE A. Click Add in Profile function.

Page 35 - NETWORK

Wireless Adapter RNX-G300EX/LX User Manual - 34 - NETWORK Under the Network function, system will display the information of surrounding APs from last scan result. List informations include SSID, BSSID, Signal, Channel, Encryption algorithm, Authentication and Network type as Figure 2-3-1-1 shown. F...

Page 43 - EXAMPLE ON ADDING PROFILE IN NETWORK

Wireless Adapter RNX-G300EX/LX User Manual - 42 - EXAMPLE ON ADDING PROFILE IN NETWORK A. Select the intended network from AP list in Network function.

Page 47 - ADVANCED

Wireless Adapter RNX-G300EX/LX User Manual - 46 - ADVANCED Figure 2-4 shows Advance function of RaUI. Figure 2-4 Advance function A. Wireless mode : Select wireless mode. 802.11 B only, 802.11 A only, 802.11 B/G mix, 802.11 B/G/N mix, 802.11 A/B/G mix, and 802.11 A/B/G/N mix modes are supported. (80...

Page 48 - STATISTICS

Wireless Adapter RNX-G300EX/LX User Manual - 47 - ICONS AND BUTTONS: Show the information of Status Section. Hide the information of Status Section. STATISTICS Statistics page displays the detail counter information based on 802.11 MIB counters. This page translates that MIB counters into a format e...

Page 50 - WMM

Wireless Adapter RNX-G300EX/LX User Manual - 49 - WMM Figure 2-6-1 shows WMM function of RaUI. It involves "WMM Enable", "WMM - Power Save Enable" and DLS setup. The introduction indicates as follow : Figure 2-6-1 WMM function A. WMM Enable : Enable Wi-Fi Multi-Media. The setting met...

Page 51 - EXAMPLE TO CONFIGURE TO ENABLE DLS (DIRECT LINK SETUP)

Wireless Adapter RNX-G300EX/LX User Manual - 50 - EXAMPLE TO CONFIGURE TO ENABLE DLS (DIRECT LINK SETUP) A. Click "Direct Link Setup Enable"

Page 57 - EXAMPLE TO CONFIGURE TO ENABLE WI-FI MULTI-MEDIA

Wireless Adapter RNX-G300EX/LX User Manual - 56 - EXAMPLE TO CONFIGURE TO ENABLE WI-FI MULTI-MEDIA If you want to use "WMM-Power Save" or "Direct Link" you must enable WMM. The setting method of enabling WMM indicates as follows: A. Click "WMM Enable".

Page 59 - EXAMPLE TO CONFIGURE TO ENABLE WMM POWER SAVE

Wireless Adapter RNX-G300EX/LX User Manual - 58 - EXAMPLE TO CONFIGURE TO ENABLE WMM POWER SAVE A. Click "WMM-Power Save Enable". B. Please select which ACs you want to enable. The setting of enabling WMM-Power Save is successfully.

Page 60 - WPS

Wireless Adapter RNX-G300EX/LX User Manual - 59 - WPS Figure 2-7-1 shows WPS function of RaUI. The introduction indicates as follow: Figure 2-7-1 WPS function

Page 62 - WPS INFORMATION ON AP

Wireless Adapter RNX-G300EX/LX User Manual - 61 - WPS INFORMATION ON AP WPS information contain authentication type, encryption type, config methods, device password id, selected registrar, state, version, AP setup locked, UUID-E and RF bands. The introduction indicates as follow :

Page 64 - EXAMPLE TO ADD TO REGISTRAR USING PIN METHOD

Wireless Adapter RNX-G300EX/LX User Manual - 63 - EXAMPLE TO ADD TO REGISTRAR USING PIN METHOD The user obtains a device password (PIN Code) from the STA and enters the password into the Registrar. Both the Enrollee and the Registrar use PIN Config method for the configuration setup. The detail indi...

Page 70 - EXAMPLE TO ADD TO REGISTRAR USING PBC METHOD

Wireless Adapter RNX-G300EX/LX User Manual - 69 - EXAMPLE TO ADD TO REGISTRAR USING PBC METHOD The PBC method requires the user to press a PBC button on both the Enrollee and the Registrar within a two-minute interval called the Walk Time. If only one Registrar in PBC mode, which PBC mode is obtaine...

Page 75 - EXAMPLE TO CONFIGURE A NETWORK/AP USING PIN OR PBC METHOD

Wireless Adapter RNX-G300EX/LX User Manual - 74 - EXAMPLE TO CONFIGURE A NETWORK/AP USING PIN OR PBC METHOD A o to the box of Config Mode and select Registrar.

Page 78 - LINK STATUS

Wireless Adapter RNX-G300EX/LX User Manual - 77 - LINK STATUS Figure 2-9 is the link status page, it displays the detail information current connection. Figure 2-9 Link Status function A. Status : Current connection status. If no connection, if will show Disconnected. Otherwise, the SSID and BSSID w...

Page 80 - AUTHENTICATION TYPE :

Wireless Adapter RNX-G300EX/LX User Manual - 79 - 802.1X SETTING 802.1x is a authentication for "WPA" and "WPA2" certificate to server. AUTHENTICATION TYPE : A. PEAP : Protect Extensible Authentication Protocol. PEAP transport securely authentication data by using tunneling between P...

Page 87 - EXAMPLE TO CONFIGURE CONNECTION WITH WEP ON

Wireless Adapter RNX-G300EX/LX User Manual - 86 - EXAMPLE TO CONFIGURE CONNECTION WITH WEP ON A. Select AP with WEP encryption and click "Connect" button.

Page 91 - EXAMPLE TO CONFIGURE CONNECTION WITH WPA-PSK

Wireless Adapter RNX-G300EX/LX User Manual - 90 - EXAMPLE TO CONFIGURE CONNECTION WITH WPA-PSK A. Select the AP with WPA-PSK authentication mode and click "Connect" button.

Page 95 - EXAMPLE TO CONFIGURE CONNECTION WITH WPA

Wireless Adapter RNX-G300EX/LX User Manual - 94 - EXAMPLE TO CONFIGURE CONNECTION WITH WPA A. Select AP with WPA authentication mode and click "Connect" button.

Page 111 - ACKNOWLEDGEMENTS

Wireless Adapter RNX-G300EX/LX User Manual - 110 - ACKNOWLEDGEMENTS The above setting is test platform by RaLink technology corp. User can set the function in accordance with A.P. Acknowledgements: "This product includes software developed by MDC and its licensors. This product includes software...