Rose Electronics ultramatrix av dvi 8x8 dvi video router - Manuals

2 ULTRAMATRIX AV DVI INSTALLATION AND OPERATIONS MANUAL Features  8 x 8 non-blocking, single link DVI-D matrix switch (8-DVI video inputs / 8-DVI video outputs)  Independently display the contents of 8 computers on 8 displays  Max TMDS rate of 2 x 1.65 Gb/sec  HDTV resolutions up to 1920 x 1200 ...

MODELS ULTRAMATRIX AV DVI INSTALLATION AND OPERATIONS MANUAL 3 Model Front View Figure 1. Front View OUTPUTS INPUTS Rear View Inputs Outputs Figure 2. Rear View Left – 8 DVI-I video in connectors Right – 8 DVI-I video out connectors DB9F Serial input for serial switching commands Power input jack (+...

INSTALLATION and OPERATION 4 ULTRAMATRIX AV DVI INSTALLATION AND OPERATIONS MANUAL Installation and Set-Up Please refer to the safety section first before proceeding with any installation or configuration or the UltraMatrix AV DVI. It is recommended that the following installation procedure be follo...

ULTRAMATRIX AV DVI INSTALLATION AND OPERATIONS MANUAL 5 Connecting the video sources Connect up to eight single link DVI video sources to the Video In ports on the rear panel using a DVI male to male extension cable. The DVI cable length is a maximum of 20 ft. (6.1 m). Connecting the video monitors ...

6 ULTRAMATRIX AV DVI INSTALLATION AND OPERATIONS MANUAL Switching using the front panel To switch a video source to an output monitor using the front panel, first press the enter button to choose which output port to display the video on. Next press the scroll button to select the input source to ro...

ULTRAMATRIX AV DVI INSTALLATION AND OPERATIONS MANUAL 7 Switching using serial commands Set-up a serial communication program with the following parameters: Baud Rate – 9600 Data Bits – 8 Parity – None Stop Bits - 1 Connect to the UltraMatrix AV DVI 8x8 unit and issue the following command : <CR&...

8 ULTRAMATRIX AV DVI INSTALLATION AND OPERATIONS MANUAL Installing RoseControl software Install the RoseControl switching software on the computer or laptop that will be used to control and switch the video inputs. Installation of RoseControl follows the standard Windows® type installation procedure...

ULTRAMATRIX AV DVI INSTALLATION AND OPERATIONS MANUAL 9 Figure 6. Rose Control Switching Matrix The left column lists the inputs 1-8 and the right column lists the outputs 1-8. The input and output names can be changed by highlighting the name to change and re-naming it. Switching using Rose Control...

10 ULTRAMATRIX AV DVI INSTALLATION AND OPERATIONS MANUAL Example: To route outputs 1, 2, and 4 to input #2, hold down the control key, click on the output numbers 1, 2, and 4. When all outputs are selected, click on input #2. To select multiple adjacent outputs to connect to a single input, click on...

SAFETY 12 ULTRAMATRIX AV DVI INSTALLATION AND OPERATIONS MANUAL Safety The UltraMatrix AV DVI 8x8 has been tested for conformance to safety regulations and requirements, and has been certified for international use. Like all electronic equipment, the unit should be used with care. To protect yoursel...

ULTRAMATRIX AV DVI INSTALLATION AND OPERATIONS MANUAL 13 Safety and EMC Regulatory Statements Safety information Documentation reference symbol. If the product is marked with this symbol, refer to the product documentation to get more information about the product. WARNING A W ARNING in the manual d...

SERVICE and MAINTENANCE 14 ULTRAMATRIX AV DVI INSTALLATION AND OPERATIONS MANUAL Service Information Maintenance and Repair This Unit does not contain any internal user-serviceable parts. In the event a Unit needs repair or maintenance, you must first obtain a Return Authorization (RA) number from R...

APPENDICES ULTRAMATRIX AV DVI INSTALLATION AND OPERATIONS MANUAL 15 Appendix A - Specifications Video Video Bandwidth 165MHz Video Input Signal Level 1.2 Volt p-p Resolution 1080p / 1920 x 1200 Video Connector DVI-I Power Voltage 5VDC / 3A Power Adapter Physical Dimensions 17” W x 6.75” D x 1.75” H ...