Roland DIF-AT24 - Manuals - manualsarea.com

Page 3 - NOTICE; FEDERAL COMMUNICATIONS COMMISSION

3 104 • Try to prevent cords and cables from becoming entangled. Also, all cords and cables should be placed so they are out of the reach of children. ................................................................................................ 106 • Never climb on top of, nor place heavy objects...

Page 4 - IMPORTANT NOTES; Power Supply

4 IMPORTANT NOTES In addition to the items listed under “USING THE UNIT SAFELY” on page 2, please read and observe the following: 291a Power Supply 307 • Before connecting this unit to other devices, turn off the power to all units. This will help prevent malfunctions and/or damage to speakers or ot...

Page 5 - Contents; Connection example 1; Specifications

5 Contents Main Features ....................................................................................................................... 1USING THE UNIT SAFELY ............................................................................................... 2IMPORTANT NOTES ......................

Page 6 - Panel descriptions; Front Panel; Rear Panel

6 Panel descriptions Front Panel ADAT indicator This indicator will light green if an ADAT interface signal is being input to the ADAT digital IN connector. POWER indicator When the R-BUS device connected to the R-BUS connector is powered up, this indicator will light red to indicate that power is b...

Page 7 - Turning the power on/off; Turning the power on; Turning the power off

7 Turning the power on/off Turning the power on Before you turn each device on, make sure that all devices are connected correctly. Once the connections have been completed, turn on power to your various devices in the order specified. By turning on devices in the wrong order, you risk causing malfu...

Page 8 - Connections and settings; Connection; Connecting the VS-2400CD and a computer

8 Connections and settings Connection example 1 Connecting the VS-2400CD and a computer Here's an example of synchronization with computer-based sequencer software or the VS-2400CD functioning as the master. Make connections as shown in the diagram. This example uses the UA-1000 to perform input/out...

Page 9 - Sampling Frequency settings; Settings

9 Connections and settings ■ Sampling Frequency settings Set the sampling frequency of your sequencer software, the VS-2400CD, and the UA-1000 to the same setting (44.1 kHz or 48 kHz). ■ Master Clock settings You'll also need to set the Master Clock for your sequencer software. For details on this s...

Page 12 - Connecting the VS-2400CD and an ADAT device

12 Connections and settings Connection example 3 Connecting the VS-2400CD and an ADAT device This example allows digital audio signals to be transferred. Make connections as shown in the diagram. To prevent malfunction and/or damage to speakers or other devices, always turn down the volume, and turn...

Page 13 - Connecting the VS-2400CD with an ADAT device and BRC

13 Connections and settings Connection example 4 Connecting the VS-2400CD with an ADAT device and BRC The BRC is used to operate the VS-2400CD and ADAT device in synchronization. Make connections as shown in the diagram. To prevent malfunction and/or damage to speakers or other devices, always turn ...

Page 14 - BRC settings

14 Connections and settings ■ Sampling Frequency settings Set the sampling frequency of the VS-2400CD and ADAT device to the same setting (48 kHz). ■ Master Clock settings You'll also need to set the Master Clock for the ADAT device. For details on this setting, refer to the owner's manual for the A...

Page 15 - Using the DIF-AT24 as an additional MIDI OUT for the MV-8000

15 Connections and settings Connection example 5 Using the DIF-AT24 as an additional MIDI OUT for the MV-8000 Make connections as shown in the diagram. To prevent malfunction and/or damage to speakers or other devices, always turn down the volume, and turn off the power on all devices before making ...

Page 16 - Information

03454012 ’03-11-1KS This owner’s manual is printed on recycled paper. Information When you need repair service, call your nearest Roland Service Center or authorized Roland distributor in your country as shown below. As of November 1, 2003 (Roland) ARGENTINA Instrumentos Musicales S.A. Av.Santa Fe 2...

Page 17 - ■ バージョンの表示方法; 電源を入れ、起動させます。; 画面の「1. XXX」でバージョンの確認をしてください。; To check the version

03564056 ’03-11-1KS VM-7100/7200 と接続する場合 VM-7100/7200 のシステム・バージョンが 1.7 未満の場合、DIF-AT24 は正常に動作しません。以下の方法で VM-7100/7200 のバージョンを確認し、必ず 1.7 以降にバージョンアップしてください。バージョンアップに関しては、最寄の弊社営業所またはローランド・サービス・ステーションまでお問い合わせください。 ■ バージョンの表示方法 1 VM-7100/7200 を VM-C7100/C7200 と接続します。 2 電源を入れ、起動させます。 3 ［On Display］を押しながら...