Roland AT-350C - Manuals

7 Quick Start Playing Along with a Song Here’s how you can play back one of the songs that are built into the ATELIER, and perform along with the song. 2. Use the Value [-] [+] buttons to select a song. 4. Play along with the song. 1. Press the [Song] button. 1 2 3. Press the [Play/Stop] button to p...

8 Do not open (or modify in any way) the unit or its AC adaptor. Do not attempt to repair the unit, or replace parts within it (except when this manual provides specific instructions directing you to do so). Refer all servicing to your retailer, the nearest Roland Service Center, or an authorized Ro...

9 USING THE UNIT SAFELY 9 In households with small children, an adult should provide supervision until the child is capable of following all the rules essential for the safe operation of the unit. Protect the unit from strong impact.(Do not drop it!) Do not force the unit’s power-supply cord to shar...

10 IMPORTANT NOTES Power Supply • Do not connect this unit to same electrical outlet that is being used by an electrical appliance that is controlled by an inverter (such as a refrigerator, washing machine, microwave oven, or air conditioner), or that contains a motor. Depending on the way in which ...

11 IMPORTANT NOTES 11 Before Using USB Memories Using USB Memories • Carefully insert the USB memories all the way in—until it is firmly in place. • Never touch the terminals of the USB memories. Also, avoid getting the terminals dirty. • USB memories are constructed using precision components; hand...

12 Contents Quick Start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Trying Out the Sounds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Performing with Rhythms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

14 Panel Descriptions 1 Solo voice select buttons (p. 29) Use these buttons to select a solo voice and to adjust the volume of the solo voice. Solo part [Alternate] button (p. 29) Level [ ] [ ] buttons (p. 35) [To Lower] button (p. 47) 2 Vintage Organ buttons (p. 32) These buttons add vintage organ ...

18 Panel Descriptions Rear Panel 2 3 1 5 4 6 7 8 9 1 USB (MIDI) connector Connect your computer for transferring performance data (p. 113). 2 MIDI connectors Connect an external MIDI device here to transfer performance data (p. 113). 3 Input jacks You can connect an audio source here (p. 111). 4 AUX...

19 Panel D escriptions Panel Descriptions Other Connectors 1 2 1 USB Memory connector This port lets you connect separately available USB memory or a CD drive.You can use USB memory to store a registration set or a song that you’ve recorded on the ATELIER (p. 68).You can also connect a CD drive and ...

20 Getting Ready Placing the ATELIER on the Stand If you place the ATELIER on a stand, you must use the KS-G8 or the KS-12 (sold separately). NOTE! • When placing the ATELIER on the stand, be careful not to pinch your fingers between the instrument and the stand. • When lifting the ATELIER onto the ...

21 Getting Ready Attaching the Music Rest 1. Remove the two music rest fastening screws from the rear panel. 2. Tighten the two screws to fasten the music rest in place. NOTE! • When attaching the music rest, support it securely with your hand so that it does not fall. • Be careful not to pinch your...

22 Turning the Power On/Off * Once the connections have been completed, turn on power to your various devices in the order specified. By turning on devices in the wrong order, you risk causing malfunction and/or damage to speakers and other devices. * Before switching the power on/off, always be sur...

23 Getting Ready Viewing the basic screen The ATELIER has three types of basic display screen: the Rhythm Screen, the Composer Screen and the Registration Screen. You can alternate from one to the other by pressing the [Display/Exit] button. Rhythm Screen Tempo Rhythm Name Beat Measure Chord Name Co...

24 Live performance Mixer, etc. Power amp/speaker Main Out jack MEMO If you connect speakers or an external reverb unit to the AUX Out jacks, you’ll be able to much more readily express the expansiveness of the stereo sound field and add more of a sense of presence to your music (p. 112). Using Head...

25 Getting Ready Setting up the pedalboard Set up the pedalboard as shown below. For the PK-25A Position the pedalboard so that the lower keyboard’s A4 key is aligned with the center of the PK-25A’s expression pedal. Position the pedalboard so that the ATELIER’s rear panel is aligned with the PK-25A...

26 Connecting expression pedals and pedal switches You can connect an expression pedal (EV-7; sold separately) and pedal switches (DP series; sold separately) to the Pedal jacks on the rear panel. Expression pedal Pedal jack Foot switch Foot switch Connected jack Explanation Pedal (Damper) jack The ...

27 Getting Ready Listening to the Demo Songs The ATELIER contains 10 demo songs. Here’s how to play the demo songs, and fully appreciate the sounds, Rhythms, and Automatic Accompaniment that are available with the ATELIER. 3 4 2 1 5 1. Press the [Registration] button and [Media] button simultaneousl...

28 Performing Selecting Sounds (Voices) The ATELIER is able to produce the sounds of various instruments. These sounds are called “Voices.” About the Voices and Parts The ATELIER is a two-manual instrument. These two manuals are called the “upper keyboard” and the “lower keyboard.”The voices of each...

29 Per forming Functions of the Voice Buttons Each time you press a voice button, its indicator will alternate between lit and unlit; when the indicator of a voice’s button is lit, that voice can be played.With the exception of the pedal bass buttons, two voices of the same category are assigned to ...

31 Per forming Recalling Panel Settings by Choosing a Keyword (Music Assistant) The ATELIER contains panel settings appropriate for various well-known songs from around the world.By choosing a keyword that suits the feel of your song, you can easily recall a rhythm accompaniment and melody voices. C...

33 Per forming Playing a Vintage Organ Voice 1. Press the Vintage Organ [On/Off ] button so its indicator is lit. Each time you press the button, the indicator will alternate between ON (lit) and OFF. The Vintage organ screen appears. 2. Slide the harmonic bars that you want to hear. When a harmonic...

34 Adjusting the rate at which the percussion decays You can shorten the decay time of the percussion sound. 1. Press the Percussion [Fast Decay] button to switch the indicator between lit/unlit. Percussion [Fast Decay] Button Explanation Lit The percussion sound will disappear quickly. The percussi...

35 Per forming Adjust the Volume Balance The ATELIER allows you to adjust the volume balance individually for each Part. The following buttons are used to adjust the volume of a multiple number of Parts. Button Part Accomp/SMF [ ] [ ] button Automatic Accompaniment (except Bass) Playback of performa...

36 Transposing to a Different Key (Key Transpose) You can transpose the key of a performance without having to shift the position of your fingers on the keyboard. This feature is called “Key Transpose.”For example: you may play in the familiar C major scale while your music will sound in any key of ...

37 Per forming Transpose the Pitch in Octave Units (Octave Shift) The pitch of the sound played by the keyboard can be adjusted in one-octave steps. This function is called “Octave Shift.”You can individually specify Octave Shift for each of the following parts. • Upper Organ part • Upper Orchestral...

38 Adding Effects to a Voice The ATELIER allows you to apply various effects to the sounds you play from the keyboard. Adding Harmony to a Melody (Harmony Intelligence) Harmony appropriate for the chord you play in the lower keyboard can be added to the highest note played in the upper keyboard. Thi...

39 Per forming Adding Modulation to the Sound (Rotary Effect) Rotary is an effect which simulates the sound of rotating speakers.There is a choice of two settings: Fast and Slow. 1. Select the voice to which you wish to apply the Rotary effect. 2. Press the Rotary Sound [On/Off ] button (confirm tha...

40 Adding Resonance to the Sound (Sustain Effect) Sustain allows you to add a Sustain effect or decay to each voice after the keys are released. The Sustain effect can be added simultaneously to the Upper (except the Solo Part), Lower, and Pedal voices. * The Sustain effect will not be applied to th...

41 Per forming Adding Reverberation to the Sound (Reverb Effect) Reverb is an effect that adds a sense of spaciousness to the sound, creating the illusion of playing in a concert hall. 1. Press the Reverb [ ] [ ] buttons to adjust the overall Reverb amount. When you press the Reverb [ ] button, addi...

43 Per forming Making the Sound Distort (Overdrive Effect) The Overdrive effect makes the sound distort. 1. Press the [Utility] button. 2. Use the Menu [ ] [ ] buttons to select “Overdrive.” 3. Use Value [-] [+] to adjust the amount of distortion. Settings Explanation 0–12 Higher values apply the Ov...

44 Using the D Beam Controller to Modify the Sound By positioning your hand above the D Beam controller located on the front panel, you can easily modify the sound or produce sound effects.This is a useful way to make your live performance even more expressive. 1. Press either the D Beam [Pitch], [F...

45 Per forming Using the Lower Keyboard Effectively You can divide the lower keyboard into two or more sections and play solo voices, play the pedal bass voice, or combine a variety of uses for even more versatility.For example, the following applications are possible. Using the lower keyboard to pl...

46 Using the lower keyboard to play drum sounds and solo voice Press the [Drums/SFX] button, and then press the Solo [To Lower] button (p. 47, p. 50). Drums/SFX Manual Percussion Bass Lower Solo By changing the combination of voices that are played on the Lower keyboard, and by changing the Solo Spl...

47 Per forming Playing the Solo Voice on the Lower Keyboard (Solo To Lower) Normally, the solo voice will sound on the upper keyboard. By using the Solo [To Lower] button, you can play the solo voice in the righthand side of the lower keyboard that includes the B4 key. The state in which the keyboar...

48 Using the Lower Keyboard to Play the Bass Voice (Bass Split) By using the “Bass Split” function you can play the bass voice in the left-hand side (including C3) of the lower keyboard. The location at which the lower keyboard is divided in this way, to play the pedal bass voice, is called the “Bas...

49 Per forming Playing a Lower Voice with Percussion Instrument Sounds and a Voice Phrase (Manual Percussion) You can play various drum sounds and sound effects using the bottom 15 keys of the Lower keyboard. This is convenient when you wish to play theLower voice together with drum sounds or sound ...

50 Playing Drums from the Entire Lower Keyboard (Drums/SFX) You can use the Lower keyboard to play various drum sounds (drum set). In this case, the Lower voices will no longer sound. 1. Press the [Drums/SFX] button (indicator lights). Play the Lower keyboard and listen to the various drum sounds on...

51 Per forming Using the Lower Keyboard to Play the Bass Voice (Pedal To Lower) By using the Pedal [To Lower] button, you can sound the Pedal Bass voice by playing the root note (p. 122) of a chord on the Lower keyboard in the area that is playing the Lower voice. 1. Select a Pedal Bass voice (p. 29...

52 Realistically Expressing Acoustic Instrument Performances (SuperNATURAL Voices) Acoustic instruments are noted for their richly varied tonal changes and the diversity of their performance techniques; these are indispensable elements that produce the distinctive charm of such instruments. “SuperNA...

53 Per forming Selecting the SuperNATURAL voice of the [Others] button 1. Press the Solo part [Others] button. The display will show the voice name. The indicator of the selected [Others] button will light. 2. While the display shows the voice name, use the Value [-] [+] buttons to select a SuperNAT...

54 Playing a SuperNATURAL Voice When you play a SuperNATURAL voice, its tone quality will change appropriately when you play legato or staccato passages.In addition, using the foot switches or D Beam while you perform can apply a variety of effects to the sound, making your performance expression ev...

55 Per forming Adjusting the Overall Volume Using an Expression Pedal You can use a pedalboard (PK series; sold separately) or expression pedal (EV-7; sold separately) to adjust the ATELIER’s overall volume. Stepping down on the expression pedal will increase the volume; releasing the pedal will dec...

56 Performing with an Active Expression Voice For “Active Expression Voices,” operating the expression pedal will control not only the volume but also the tone, or may add additional sounds. MEMO If you want to use an expression pedal, you’ll need to connect a pedalboard (PK series; sold separately)...

57 Per forming Using the Foot Switch There are two foot switches located at either side of the expression pedal on the pedalboard (PK series; sold separately). These two foot switches are assigned the following functions. Right foot switch Left foot switch When the power to the ATELIER is turned on,...

58 Performing with Rhythms The ATELIER lets you enjoy playing along with a rhythmic accompaniment. Selecting a Rhythm The ATELIER provides 210 types of Rhythms and Automatic Accompaniments (Music Styles).The four buttons shown below are known as the “Rhythm buttons.” They allow you to select a rhyth...

59 Per forming with R hythms Selecting Rhythms Stored in User Memory or USB Memory Here’s how to play rhythms that are stored in user memory or USB memory.You can select these rhythms by choosing the User group. MEMO With the factory settings, rhythms are already stored in user memory. 1. If you wan...

60 Playing Rhythm There are two ways to start the rhythm. You can press the [Start/Stop] button to start the rhythm, or you can use Synchro Start to have the rhythm start when you play the lower keyboard or the pedalboard.You can also make the rhythm start with an intro, or stop with an ending. Star...

61 Per forming with R hythms Stopping the Rhythm Stopping with an ending 1. Press the [Intro/Ending] button. An Ending is played, then the Rhythm stops.While the Ending is playing, the [Intro/Ending] button indicator will light, until the Ending finishes the button indicator will be turned off. Stop...

62 Changing a Tempo of Rhythm and Automatic Accompaniment You can change the tempo of the Rhythm or Automatic Accompaniment. 1. Press the Tempo [ ] [ ] buttons to change the tempo (speed) of the Rhythm or Automatic Accompaniment. Button Explanation Tempo [ ] button The tempo becomes slower Tempo [ ]...

63 Per forming with R hythms Adding Variety to the Rhythm or Automatic Accompaniment You can add variety to the rhythm or automatic accompaniment by changing the rhythm pattern of the rhythm. 1. Press the Auto [Fill In] button (indicator lights). A fill-in will automatically be added when you press ...

65 Per forming with R hythms Deleting a Rhythm from User Memory or USB Memory You can delete rhythms stored in User memory or USB memory. 1. Select the rhythm you want to delete (p. 58). 2. Press the [Load] button and [Save] buttons simultaneously. The following display appears. To cancel the proced...

66 Storing Your Performance Settings (Registration) The ATELIER allows you to store sound settings and panel settings such as 8 in the Registration buttons. There are a total of 8 Registration buttons, and one set of panel settings can be stored in each, allowing you to register a total of 8 differe...

67 St oring Your Per formanc e S ettings (Registr ation) Storing Registrations 1. Make all the panel settings that you wish to store. 2. While holding down the [Write] button, press one of the Registration [1]–[8] buttons. The panel settings will be stored in the selected Registration button. * If y...

68 Saving Registration Sets With the settings of Registration buttons [1]–[8] considered as one set, you can store the registration set to USB memory or User memory. We recommend that complex panel settings or Registrations you wish to keep be saved on USB memory. Furthermore, when you save registra...

69 St oring Your Per formanc e S ettings (Registr ation) 8. Press the Value [-] [+] buttons to select the format in which the data will be saved. Display Explanation ORIGINAL Save formats that can be used with the AT-350C. When saved in this format, the data can also be used by AT-S series, AT-900, ...

70 Loading Previously Saved Registration Sets Into the ATELIER Here’s how to recall a previously saved Registration set from the User memory or USB memory into the memory of the ATELIER. Registrations can be selected in the following three ways. Loading a Set of Registrations You can load a “set” (a...

71 St oring Your Per formanc e S ettings (Registr ation) Loading an Individual Registration Recall the settings of one of the Registration [1]–[8] buttons. 1. If you want to load a registration from USB memory, connect your USB memory to the USB Memory connector. 2. Press the [Registration] button t...

72 Recalling the Order that the Registrations are Saved (Load Next) You can recall Registrations in the order in which they were saved on the USB memory or User memory. This function is called “Load Next.”When you will be performing live, you can save Registration sets to USB memory in the order in ...

73 St oring Your Per formanc e S ettings (Registr ation) Deleting a Set of Registrations Here’s how to delete a Registration set that was saved to a USB memory, or User memory. 1. Prepare the registration that you want to delete. If you want to delete registration data from the USB memory, connect t...

74 Recording Your Performance You can record your own performance to see how you sound, or you can play along with a recorded performance.The ATELIER lets you record in the following ways. Recording format Explanation SMF recording (p. 75) Records the song in SMF format.You’ll be able to record and ...

75 Rec or ding Your Per formanc e Recording in SMF Format Here’s how a song you perform can be recorded in SMF format. 3 5 7 6 2 4 Preparing to record 1. Select the panel settings needed for recording the performance. 2. Press the [Rec] button. The [Rec] button indicator will light, and the [Play/St...

76 Listening to the recorded performance 6. Press the [Reset] button. The location at which playback will start will return to the beginning of the first measure (bar).If you wish to begin playback from the middle of the song, press the [Bwd] button or [Fwd] button to move to the measure from which ...

77 Rec or ding Your Per formanc e Advanced Recording Methods Recording each part separately In this method, each part (track button) is recorded one after another: first the bass part, then the Lower part, etc. If there are any previously recorded performances, you can listen to them as you record a...

79 Rec or ding Your Per formanc e Layering a new recording onto SMF music files You can load commercially available SMF music files into the ATELIER, and record your own performance on top of it. During recording, the data you’ve loaded will be played back, while you record your performance. 4 5 2 3...

80 Re-recording using performance data from a USB memory If you want to re-record performance data from a USB memory, you must first load that performance data into the ATELIER’s internal memory. 4 5 2 3 1. Prepare the performance data. Connect the USB memory to the USB Memory connector. 2. Press th...

81 Rec or ding Your Per formanc e Saving Performance Songs The performance data that you recorded will disappear when the power of the ATELIER is turned off. If you wish to keep the performance data, you can save it on a USB memory, or “Favorites” (internal memory).If the recorded performance data h...

83 Rec or ding Your Per formanc e If the following screen appears If you select a number at which performance data has already been saved, the following screen appears. If you wish to update the contents of the performance data 1. Press the [Rec] button. If you want to save your performance as new d...

84 Erasing Performance Data If you wish to discard your recording and re-record from the beginning, or if you wish to record a new performance, you must erase the previously- recorded data. 2 1 3 1. Press the [Display/Exit] button a number of times to access the composer screen. 2. Press the [Load] ...

85 Rec or ding Your Per formanc e Recording in Audio Format Here’s how to record your performance in audio format. * Performances recorded in audio format are saved on a USB memory. If you want to record audio, you must connect your USB memory to the USB Memory connector. 5 6 9 3 4 7 8 Preparing to ...

86 Naming your performance data 7. Press the Menu [ ] [ ] buttons to move the cursor, and press the Value [-] [+] buttons to select a character. Button Explanation Value [-] [+] buttons Select a character. The following characters can be selected._ A B C D E F G H I J K L M N O P Q R S T U V W X Y Z...

87 Rec or ding Your Per formanc e Changing the Name of Performance Data You can change the name of performance data that’s been recorded in audio format. 4 3 2 5 1. Load the performance data that is to be given a name change (p. 80). 2. Press the [Display/Exit] button a number of times to access the...

88 Playing Performance Data from User Memory or a USB memory Here’s how to play back performance data that’s been saved in user memory or on a USB memory. 5 6 4 2 3 1. Prepare the song that you want to play back. If you want to play back performance data from a USB memory, connect it to the USB Memo...

89 Rec or ding Your Per formanc e Deleting a Saved Performance Songs You can delete performance data that was saved onto a “Favorites,” or USB memory.If you want to delete a song in USB memory, connect your USB memory to the USB Memory connector before you continue. 4 5 3 1 2 1. Press the [Song] but...

90 Detailed Settings for Various Functions Basic Operations in the Utility Screen In the Utility screen you can make various settings related to performance and recording. 5 4 2 1 3 Selecting the parameter to edit 1. Press the [Utility] button. The [Utility] button’s indicator will light, and the Ut...

91 Detailed S ettings f or Various F unc tions Settings you can change Parameter Page Octave Shift Octave Shift: Pedal p. 37 Octave Shift: LowerOctave Shift: Upper OrganOctave Shift: Upper Orchestra Octave Shift: Solo Sustain Sustain: Upper p. 40 Sustain: LowerSustain: PedalLength: UpperLength: Lowe...

93 Detailed S ettings f or Various F unc tions Changing the Pedalboard Polyphony (Pedal Bass Mode) You can set the Bass Pedalboard to play simultaneous multiple notes or single notes only. Value Explanation MONOPHONIC Only single notes can be played. POLYPHONIC Multiple notes can be played. Performa...

94 Changing the Pitch Bend Range (Pitch Bend Range) This setting allows you to choose the maximum amount of Pitch change (range) permissible when using Pitch Bend (p. 44). The range can be set anywhere between 1–12 (in semitone units; with a maximum of one octave). Value 1–12 (semitone steps) Changi...

95 Detailed S ettings f or Various F unc tions Rhythm Settings Producing Chords with Simple Fingering (Chord Intelligence) “Chord Intelligence” is a feature that intelligently plays the correct accompaniment chords the moment you play a key specifying a chord on the Lower keyboard during Automatic A...

96 Adjusting the Volume Balance of the Arranger (AccompPartBalance) You can adjust the volume balance of each part. 1. Press the [Utility] button. 2. Use the Menu [ ] [ ] buttons to select “AccompPartBalance.” 3. Press the [Utility] button. The Accomp Part Balance screen appears. MEMO You can also a...

97 Detailed S ettings f or Various F unc tions Registration Arranger Update (Arranger Update) You can specify how the settings related to Rhythm performances and Automatic Accompaniment will be recalled when you press a Registration [1]–[8] button. Value Explanation DELAYED Settings related to Rhyth...

98 Silencing a Specific Track (Track Mute) Here’s how to individually mute tracks of SMF format performance data. 1. Press the [Utility] button. 2. Using the Menu [ ] [ ] buttons, select “Track Mute.” 3. Press the Value [-] [+] buttons to select the track that you wish to mute. Performance data reco...

100 Media Settings Creating a Folder in USB Memory or User Memory (Create Folder) You can create folders in a connected USB memory device or in user memory.If you want to create a folder in USB memory, connect the USB memory to the USB Memory connector. 1. Press the [Utility] button. 2. Press the Me...

101 Detailed S ettings f or Various F unc tions Copying Performance Song (Copy Song) Performance songs and SMF music files from USB memory can be copied to “Favorites” (User memory).If performance data saved in USB memory is stored in “Favorites,” the stored performance song will not disappear even ...

102 Copying Registrations (Copy Registration) Registrations from USB memory can be copied to user memory.If a registration saved in USB memory is stored in user memory, the stored registration data will not disappear even when you turn off the power. It is convenient to load frequently-used registra...

103 Detailed S ettings f or Various F unc tions Copying Rhythms (Copy Rhythm) User memory already contains rhythms, but you can replace these rhythms with rhythms from USB memory. Rhythms copied from the USB memory into User memory will not be lost even if the power is turned off. It is convenient t...

104 Formatting a USB Memory (Format Media) The process of preparing USB memory so that they can be used with the ATELIER is called “initialization” (formatting).If the media format does not match the ATELIER’s, you will not be able to use that media with the ATELIER. 1. Connect the USB memory to the...

105 Detailed S ettings f or Various F unc tions MIDI Settings Selecting the MIDI Transmit Channel (Tx MIDI Channel) When you use the MIDI connectors of the ATELIER to transmit musical data to external devices, for each keyboard (Upper, Lower, and Pedal) you can specify the channel on which your play...

106 Other Settings Adjust the Standard Pitch (Master Tune) The basic pitch of an instrument is generally considered as the pitch of the middle A note. The “Master Tune” parameter lets you adjust this basic pitch to match the pitch of any other instruments that are playing together with the ATELIER. ...

107 Detailed S ettings f or Various F unc tions Restoring the User Memory to the Original Factory Settings (User Memory Reset) You can restore the User memory to their original factory settings. This function is called “User Memory Reset.” 1. Turn down the volume to the minimum level, then turn off ...

108 Restoring All the Factory Default Settings (Factory Reset) The settings stored in the ATELIER can be returned to their factory settings. This function is called “Factory Reset.” 1. Turn down the volume to the minimum level, then turn off the power. 2. While holding down the [One Touch Program] b...

109 Connec tions with O ther E quipmen t Connections with Other Equipment Connecting a CD Drive and Playing Songs You can connect a commercially available CD drive, and use it to play back music CDs or CD-ROMs on which SMF music files are saved. USB Memory connector USB connector USB cable CD drive ...

110 Enjoying Karaoke with a Music CD (Center Cancel) You can minimize the vocal sounds of a commercially available music CD, and sing the vocal part yourself. This is a convenient way to enjoy karaoke or practice soloing with a favorite music CD. * For some songs, the vocal sound may not be eliminat...

111 Connec tions with O ther E quipmen t Enjoying VIMA TUNES Songs The ATELIER can play back separately available VIMA CD-ROMs (VIMA TUNES).This allows you to play back VIMA TUNES songs while you enjoy performing with recommended sounds. VIMA TUNES VIMA TUNES is a Roland specification for music file...

112 Changing the Speaker Connection Settings By connecting speakers or an audio system to the Aux Out jacks, you can play the reverberation portion of the sound through your speakers. You can also connect an external reverb device and use it to apply reverb.Since the manually played sounds other tha...

113 Connec tions with O ther E quipmen t Connecting a Computer The following become possible once you connect a USB cable (available separately) between the USB (MIDI) connector located to the lower left of the ATELIER and the USB connector of your computer. • You can use the ATELIER to play sounds ...

114 Example connection: Playing a MIDI sound module from the ATELIER MIDI connectors MIDI device MIDI cable MIDI IN Making the connections 1. Turn the volume all the way down on the ATELIER and on the device you’re about to connect. 2. Switch off the power to the ATELIER and the device you’re about ...

115 Troubleshooting Appendices Troubleshooting If you suspect a malfunction, please read this section first. Power does not turn on Problem Cause Action Page When you press the [Power] switch, the power doesn’t come on AC adaptor is not connected correctly. Connect the AC adaptor is correctly. p. 21...

116 Troubleshooting Problems with the sound Problem Cause Action Page When the human voice “Jazz Scat” is selected, playing dynamics do not change the sound The setting of “Initial Touch” is turned OFF. Turn “Initial Touch” on. p. 92 Rotary effect is not be applied Some sounds do not allow the rotar...

117 Troubleshooting Appendices Troubleshooting Registrations do not switch correctly Problem Cause Action Page The Rhythm does not change when you press the Registration buttons The settings at which Registrations are recalled (Registration Arranger Update) has been set to “DELAYED.” Set the timing ...

118 Troubleshooting Problems with playback functions Problem Cause Action Page Moving your hand over the D Beam controller does not produce a sound If a D Beam button is lit in red, moving your hand above the D Beam controller will apply an effect to the sound you play from the keyboard. Press the D...

119 Err or Message Appendices Error Message Error Message Meaning Copy Protected. Can’t Save. To protect the copyright, this music file cannot be saved as SMF format. Write-Protected Media The protect tab of the storage media is set to the Protect (write prohibit) position. Move the tab to the Write...

120 Chord List symbol: Indicates the constituent not of chord. symbol: Chord shown with an “ ”can be played by pressing just the key marked with the “ .” E 6 Em7 5 Fm7 5 Dm7 5 C#m7 5 Cm7 5 C C# D E E F Cmaj7 C#maj7 Dmaj7 E maj7 Emaj7 Fmaj7 C7 C#7 D7 E 7 E7 F7 Cm C#m Dm E m Em Fm Cm7 C#m7 Dm7 E m7 Em...

122 Glossary Arrangement This refers to changes that have been made in an original tune, by adding a new accompaniment or by changing the instruments used. Automatic accompaniment Automatic Accompaniment is automatic accompaniment when just a few keys in the lower section of the keyboard are pressed...

123 St or ed Items Appendices Stored Items Settings that are stored after the power is turned off Arranger Update Auto Std Tempo (Auto Standard Tempo) Aux Out Mode D Beam Sensitivity Ez Touch Exp. Curve (Expression Curve) LCD Contrast Lyrics ManualButtonAssign Master Tune Metronome Sound MIDI IN Mod...

124 Main Specifications ATELIER Combo AT-350C: Music ATELIER Keyboard Upper 49 keys (C3–C7) Lower 64 keys (Waterfall keyboard, A1–C7) Initial Touch Upper, Lower (10 levels for each) Sound Generator Sound Generator Conforms to GM2/GS/XGlite Max. Polyphony 128 Voice 243 Voices (including 15 SuperNATUR...

125 M ain Specific ations Appendices Main Specifications Weight 25.5 kg / 56 lbs 4 oz (including Music Rest) 24.5 kg / 54 lbs 1 oz (not including Music Rest) Accessories Music RestAC AdaptorPower CordPK CableOwner’s ManualQuick GuideVoice & Rhythm Guide Options (sold separately) Keyboard Stand: ...

126 Index A AC adaptor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 AccompPartBalance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96 Accomp/SMF [ ] [ ] button . ....

128 Information When you need repair service, call your nearest Roland Service Center or authorized Roland distributor in your country as shown below. AFRICA EGYPT Al Fanny Trading Offi ce 9, EBN Hagar Al Askalany Street, ARD E1 Golf, Heliopolis, Cairo 11341, EGYPT TEL: (022)-417-1828 REUNION MARCEL...

130 For the USA DECLARATION OF CONFORMITY Compliance Information Statement Model Name : Type of Equipment : Responsible Party : Address : Telephone : AT-350C Digital Organ Roland Corporation U.S. 5100 S. Eastern Avenue Los Angeles, CA 90040-2938 (323) 890-3700 This product complies with the requirem...