3 Mounting the Ironing Centre SURFACE MOUNT OPTION o Make sure sold timber studs or mounting points are in suitable position for the mounting of the ironing centre. o Due to many different installation possibilities no holes have been provided for these screws, Robinhood suggest making 6 holes of su...
Page 4 - Mounting the handle to Cabinet Door
4 Connecting the Ironing Centre to Electric Power o For recessed mount, an external ON/OFF (safety) switch for the Ironing Centre must be installed near the unit. An additional power socket can be installed inside the wall between the switch and power plug. o Alternatively the unit can be hard wired...
Page 5 - Door Assembly Instructions; Use the two hinges already fix to the door.
5 Door Assembly Instructions Mounting the Cabinet Door 5. Door may be hinged from either side of the cabinet (illustration is shown for left side hinging). Both sides of the cabinet have pre-punched holes. If hanging the door from the right side, please contact Robinhood customer service for a self ...
Page 6 - Operating Instructions; BOARD RETAINER
6 Operating Instructions To open the Ironing Board, lift board retainer and lower the board. To store Ironing Board, follow the steps in reverse order. The Ironing Board can swivel 180 degrees and has three working heights, to adjust the board: 1. With the board in the horizontal position hold the b...
Page 7 - Board rotation; Make sure the door is clear if the board is to be rotated.; Lamp Replacement
7 1. Disconnect Ironing Centre from power supply. Ensure the power is switched off. 2. Insert small screwdriver or slim knife as shown, ease catch to side and slip out diffuser. 3. Replace lamp (40 watt max.) 4. Slide diffuser back into aperture and “click” into place. Turn power back on. Board rota...
Page 9 - Australia
9 Warranty Certificate (New Zealand) Terms and Conditions The following conditions apply in respect of the warranty given in this certificate: 1. Parbury Pty Limited (“Parbury”) warrants the following Robinhood products against manufacturing defects and faulty materials, under normal use and subject...