Revolabs 8000 MXP - Manuals

Revolabs 8000 MXP – Manual in PDF format online.

Manuals:

Manual Revolabs 8000 MXP

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5

Summary

Page 2 - Connecting the Cables; MXP

Connecting the Cables C ONNECTING A REVOLABS FUSION TO T ANDBERG 6000 / 8000 MXP VIDEO CODEC 1. Connect a Male RCA-RCA audio cable between the “Conf. In” port on the Fusion and the “VCR 1” port on the 6000 / 8000 MXP. 2. Connect a Male XLR audio cable between the “Mic Conf. Out” port on the Fusion a...

Page 4 - Adjust the audio Output Type Level if necessary (recommend +0dB); Return to previous menu and select ECHO CONTROL

6. Return to previous menu and select OUTPUTS 7. Confirm that Out1 is ON 8. Adjust the audio Output Type Level if necessary (recommend +0dB) 9. Return to previous menu and select ECHO CONTROL 10. Enable MIC 1 Echo Canceller (ON) 11. Return to previous menu and select AUDIO LEVELING (AGC) 12. Turn MI...

Page 5 - video codec will cause echo.

NOTE: You must use your Fusion remote control to control the room volume for both the audio and video conference calls. Adjusting the volume in the video codec will cause echo.

Revolabs Manuals