Revolabs 03-HDVENUCH - Manuals

Revolabs 03-HDVENUCH – Manual in PDF format online.

Manuals:

Manual

Manual Revolabs 03-HDVENUCH

Summary

Page 2 - specifications are subject to change without notice.; R e v o l a b s H D V e n u e

© 2010 REVOLABS, INC. All rights reserved. No part of this document may be reproduced in any form or by any means without express written permission from Revolabs, Inc. Product specifications are subject to change without notice. R e v o l a b s H D V e n u e ™ W i r e l e s s M i c r o p h o n e S ...

Page 3 - Contents

Contents Safety and General Information .................................................................................................................... 1 Introduction....................................................................................................................................

Page 4 - Safety and General Information

- 1 - Safety and General Information Please read the following information to ensure safe and efficient use of your Revolabs system. FCC User Information FCC Registration Number: 0014898290 FCC ID: T5V02HDTRX Revolabs HD Venue ™ Station FCC ID: T5V01HDEXEMIC Revolabs HD ™ Microphone FCC Notice to Us...

Page 6 - Introduction; System Components

- 3 - Introduction Congratulations on your purchase of a Revolabs Wireless Microphone System! This system utilizes 1.9 GHz DECT technology, and high band-width audio from multiple wireless microphones, enabling clear, reliable, un-tethered communications in recording, audio/video conferencing, speec...

Page 8 - TM Base Station, shown below in front and rear panel views, manages; Controls and Connections:; Female XLR and 1⁄4‖ Balanced Combo Input Connectors

- 5 - Installing the Revolabs HD Venue ™ Base Station The Revolabs HD Venue ™ Base Station, shown below in front and rear panel views, manages wireless audio signal processing, pairing, and muting between the Revolabs microphones and the Base Station. Front View Rear View Controls and Connections: 1...

Page 10 - handling, please power cycle the Base Station; Base Station; Is Line Level or Mic Level signal required?; Refer to setting Dip Switch 3 below.; How large is the room?; Refer to setting Dip Switches 7 and 8 below. Note; Using the Rear Panel Configuration DIP Switches; Feature

- 7 - 1 2 3 4 5 6 7 8 on off would allow for translation, personal hearing assistance or other services to be incorporated into an application. NOTE: The USB port may exhibit static sensitivity. If the Base Station audio shuts down after handling, please power cycle the Base Station Note: The HD Ven...

Page 12 - Revolabs HD Microphones and HD Microphone Adapters; Use any of five microphones with your Revolabs HD Venue; Using the HD Wearable Wireless Microphones; — accepts the 2.5mm plug for the earpiece.; – 30cm) from the mouth is recommended. Make sure

- 9 - Revolabs HD Microphones and HD Microphone Adapters Use any of five microphones with your Revolabs HD Venue ™ System: Revolabs HD Wearable Wireless Microphone Revolabs HD Omni-directional Tabletop Wireless Boundary Microphone Revolabs HD Uni-directional Tabletop Wireless Boundary Microphone Rev...

Page 13 - Adjusting the Volume on the Wearable Microphone Earpiece

- 10 - 3. With the microphone in the wearing position, un-mute the microphone by pressing and releasing the Mute button (confirm by a flashing GREEN LED). If the volume is too low, move the microphone closer to the mouth. 4. To turn microphones off, return the microphone unit to the Charger Base or ...

Page 14 - — docks to Revolabs HD Charger Bases.; To use the HD Omni Tabletop Microphone:

- 11 - 1. LED display — visual status for mute, un-mute, and pairing. 2. Mute button — press to mute, un-mute and pair microphone. 3. Audio jack — accepts a 2.5mm plug. 4. Charging port — docks to Revolabs HD Charger Bases. 5. Rubber feet — non-slip, vibration absorbing pads. 6. Acoustic Cover — pro...

Page 15 - To use the HD Directional Tabletop Microphone:

- 12 - Move the microphone closer to the Base Station and the connection will automatically be re -established to its original state, and the beeping will cease. If not, the microphone will continue beeping until it turns off in about 15 minutes. Using the HD Directional Tabletop Wireless Boundary M...

Page 16 - Remove the Microphone Adapter from the Charger Base.

- 13 - 5 4 3 2 1 4. To turn microphone off, return the microphone unit to the Charger Base or press and hold the Mute button for ~10 seconds until the LED turns solid RED and release button. If the microphones are placed too far from the Base Station (~65 feet or 20 meters) the connection will be dr...

Page 17 - condenser or electret microphones.; Important

- 14 - 5 4 3 2 1 Note: The Adapter does not provide phantom power or bias current so it cannot be used with condenser or electret microphones. 2. With the microphone attached, un-mute the Adapter by pressing and releasing the Mute button (confirm by a flashing GREEN LED). Note: If the microphone has...

Page 18 - — connects to Countryman microphone cable.; Remove the Microphone Adapter from the Charger Base.; returning the Adapter to the Charger Base.; Pairing Wireless Microphones to Base Station; assigned to a unique channel on the Base Station.

- 15 - 3. Mute button — press to mute, un-mute and pair microphone. 4. LED display — visual status for mute, un-mute, and pairing. 5. TA4F connector — connects to Countryman microphone cable. To use the HD Wireless Adapter for Countryman Microphone: 4. Remove the Microphone Adapter from the Charger ...

Page 19 - Charger Base; — power status indicator; Power Module; Recharging; dispose of batteries in a fire because they may explode.

- 16 - 1 2 3 2. Place the microphone unit into pairing mode by holding the Mute button down for seven seconds. The LED will turn solid RED. Release the Mute button. The microphone is now in pairing mode. 3. Within one minute, push and hold the button for the desired channel on the Base Station for s...

Page 20 - charged microphones left in the Charger Base remain solid GREEN.; Firmware; Updating the HD Venue Base Station and HD Microphones

- 17 - Either a solid RED LED (charging) or solid GREEN LED (100% charged) will appear to confirm that the microphone is inserted properly in the Charger Base. The microphones are not transmitting audio to the HD Base Station while in the Charger Base. In normal use, batteries should fully charge in...

Page 22 - Warranty; This warranty is not transferable by the original end user.; 3 Great Road

- 19 - Warranty Revolabs, Inc. warrants this product to be free of manufacturing defects. Repair or replacement of any defective part or unit (at the discretion of the Seller) will be free of charge for the period of one year. Any attempt by the user to alter the equipment, or equipment damaged by n...

Page 23 - Specifications

- 20 - Specifications Dimensions, (L, W, H) and Weight : HD Venue Base Station 16.9‖ (43.03 cm) x 8.0‖ (20.32 cm) x 1.7‖ (4.42 cm), 2.0 lbs (5.45 kg) HD Charger Base 4.6‖ (11.75 cm) x 3.125‖ (7.9 cm) x 1.0‖ (2.54 cm), 0.325 lbs (0.147 kg) Wireless Microphones Wearable: 0.9‖ (2.3 cm) x 0.8‖ (2.0 cm) ...

Page 24 - Index

- 21 - Index Adjusting the Volume, 10 Base Station, 5 Back Panel, 5 Front Panel, 5 Channel LED indicators, 5 Channels, 6 Charger Bays, 16 Charging the Batteries, 16 First-time use, 16 Recharging, 16 Connections, 6 Earpiece, 6 Full-Duplex, 6 Indicator LEDs, 18 Input Connectors, 6 LED indicator, 16 MC...