Page 2 - R e v o l a b s H D TM S i n g l e & D u a l M a n u a l
© 2009 REVOLABS, INC. All rights reserved. No part of this document may be reproduced in any form or by any means without express written permission from Revolabs, Inc. Product specifications are subject to change without notice. R e v o l a b s H D ™ S i n g l e & D u a l M a n u a l 0 1 - H D ...
Page 3 - Contents
Contents Safety and General Information .................................................................................................................... 1 Introduction....................................................................................................................................
Page 4 - Safety and General Information
- 1 - Safety and General Information Please read the following information to ensure safe and efficient use of your Revolabs system. FCC User Information FCC Registration Number: 0014898290 FCC ID: T5V02HDTRX Revolabs HD™ Dual Base Station FCC ID: T5V01HDEXEMIC Revolabs Executive HD ™ Microphone FCC...
Page 5 - HD Microphone, Wearable; Standards to wh; RF
- 2 - Export Law Assurances This product is controlled under the export regulations of the United States of America and Canada. The Governments of the United States of America and Canada may restrict the exportation or re-exportation of this product to certain destinations. For further information c...
Page 6 - Introduction; System Components
- 3 - Introduction Congratulations on your purchase of a Revolabs Wireless Microphone System! This system utilizes 1.9 GHz DECT technology, and high band-width audio from multiple wireless microphones, enabling clear, reliable, un-tethered communications in recording, audio/video conferencing, speec...
Page 7 - Front View; Controls and Connections:; Using the Rear Panel Configuration DIP switches)
- 4 - Acoustic echo cancellation (AEC) Feedback elimination Level control Equalization Noise cancellation The system is designed to optimize audio capture/reproduction by providing: Consistent audio input from all participants Minimum room noise Mute control Wireless encryption Automatic channel sel...
Page 8 - Base Station; efer to setting Dip Switch 3 below.; It is recommended that the lowest functioning Transmit Power
- 5 - To Install the Base Station: 1. Plug the power cord into an appropriate outlet 2. Connect the necessary outputs and inputs Revolabs HD ™ Base Station Audio Connections There are (2) 3.5mm balanced inputs and (2) 3.5mm balanced outputs on the back panel of the unit providing access to each chan...
Page 9 - Using the Rear Panel Configuration DIP Switches; Feature; Configuration Settings
- 6 - 1 2 3 4 5 6 7 8 on off Using the Rear Panel Configuration DIP Switches DIP Switch Feature Off (Default) On 1 Output Mixing Individual Outputs Mixed Output 2 Low Pass Filter No LPF LPF 3 Audio Output Level Line Level Mic Level 4 Mute Mode Individual Mutes No Mutes Flat High boost Bass Boost Dyn...
Page 10 - devices operating in the same frequency.; Revolabs HD Microphones and HD Microphone Adapters; Use any of five microphones with your Revolabs; Using the HD Wearable Wireless Microphones; — accepts the 2.5mm plug for the earpiece.
- 7 - DIP Switch 5&6 – Microphone EQ: There are four EQ options for the microphone outputs of the Base Station. One of these options can be activated for both microphones. DIP Switch 7&8 - Transmit Power: The transmit power of the Base Station can be adjusted to help reduce the operational r...
Page 11 - – 30cm) from the mouth is recommended. Make sure; Adjusting the Volume on the Wearable Microphone Earpiece
- 8 - Revolabs HD Wearable Microphones turn on and mute automatically when removed from Charger Base, to reduce noise while being attached. To use the HD Wearable Microphone: 1. Remove the microphone from the Charger Base. 2. Attach the microphone to clothing or to a lanyard, position microphone jus...
Page 12 - — docks to Revolabs HD Charger Bases.; To use the HD Omni Tabletop Microphone:
- 9 - Using the HD Omni-Directional Tabletop Wireless Boundary Microphones The HD Omni-directional Tabletop Wireless Boundary Microphones enable multiple conference attendees to use a single microphone. 1. LED display — visual status for mute, un-mute, and pairing. 2. Mute button — press to mute, un...
Page 13 - it’s out of; To use the HD Directional Tabletop Microphone:
- 10 - If the microphones are placed too far from the Base Station (~65 feet or 20 meters) the connection will be dropped (LED flashes all colors) and the microphone will mute. After 15 seconds the microphone will beep 5 times, and will continue beeping every 30 seconds to indicating it’s out of ran...
Page 14 - Remove the Microphone Adapter from the Charger Base.
- 11 - 5 4 3 2 1 3. With the microphone in position, un-mute the microphone by pressing and releasing the Mute button (confirm by a flashing GREEN LED). 4. To turn microphone off, return the microphone unit to the Charger Base or press and hold the Mute button for ~10 seconds until the LED turns sol...
Page 15 - condenser or electret microphones.; Important
- 12 - 5 4 3 2 1 Note: The Adapter does not provide phantom power or bias current so it cannot be used with condenser or electret microphones. 2. With the microphone attached, un-mute the Adapter by pressing and releasing the Mute button (confirm by a flashing GREEN LED). Note: If the microphone has...
Page 16 - Remove the Microphone Adapter from the Charger Base.; returning the Adapter to the Charger Base.; Pairing Wireless Microphones to Base Station; assigned to a unique channel on the Base Station.
- 13 - 1. Audio Out port — accepts the 2.5mm plug for the earpiece. 2. Charging Port — docks to all Revolabs HD Charger Bases. 3. Mute button — press to mute, un-mute and pair microphone. 4. LED display — visual status for mute, un-mute, and pairing. 5. TA4F connector — connects to Countryman microp...
Page 17 - To pair an individual microphone to the Base Station:; Single or Dual Charger Base; — power status indicator; Power Module; Recharging
- 14 - 1 2 3 To pair an individual microphone to the Base Station: 1. Turn the microphone OFF (no LED activity). If the microphone is ON, press and hold the Mute button for 10 seconds until the LED turns solid RED then release the button to turn the unit off. (do not release the button when you hear...
Page 18 - dispose of batteries in a fire because they may explode.; Firmware
- 15 - Important : The Lithium Polymer rechargeable batteries that power the microphones are not user serviceable. Please contact Revolabs (www.revolabs.com) or your AV service provider for replacement instructions and to assure the proper disposal method is used. Warning: Never dispose of batteries...
Page 20 - Warranty; This warranty is not transferable by the original end user.; 3 Great Road
- 17 - Warranty Revolabs, Inc. warrants this product to be free of manufacturing defects. Repair or replacement of any defective part or unit (at the discretion of the Seller) will be free of charge for the period of one year. Any attempt by the user to alter the equipment, or equipment damaged by n...
Page 21 - Specifications
- 18 - Specifications Dimensions, (L, W, H) and Weight : Single/Dual Base Station 5. 19‖ (13.18 cm) x 3.25‖ (8.25 cm) x 1.0‖ (2.54 cm), 0.325 lbs (0.147 kg) Single/Dual Charger Base 4.6‖ (11.75 cm) x 3.125‖ (7.9 cm) x 1.0‖ (2.54 cm), 0.325 lbs (0.147 kg Wireless Microphones Wearable: 0.9‖ (2.3 cm) x...
Page 22 - Index; Charger Bays; Charging the Batteries, 13; LED indicator
- 19 - Index Adjusting the Volume, 8 Base Station, 4 Back Panel, 4 Front Panel, 4 Channel LED indicators, 5 Channels, 5 Charger Bays , 13 Charging the Batteries, 13 First-time use, 13 Recharging, 13 Connections, 5 Earpiece, 5 Full-Duplex, 5 Indicator LEDs, 15 Input Connectors, 5 LED indicator , 13 M...
