Remii 30-BAY-SLIM - Manuals

Remii 30-BAY-SLIM Fireplace – User Manual in PDF format online.

Manuals:

User Manual

User Manual Remii 30-BAY-SLIM

Summary

Page 2 - TABLE OF CONTENTS; Remii

IMPORTANT INSTRUCTIONS ......................................................................................................................................... 3 UNPACKING AND TESTING APPLIANCE ............................................................................................................

Page 3 - IMPORTANT INSTRUCTIONS

IMPORTANT INSTRUCTIONS PLEASE RETAIN THIS USER GUIDE FOR FUTURE REFERENCE When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following: 1) Read all instructions before using this fireplace 2) ...

Page 4 - UNPACKING AND TESTING APPLIANCE; Carefully remove the appliance from the box.; GROUNDING APPLIANCE; the fireplace. Before installation consider the following:

UNPACKING AND TESTING APPLIANCE Carefully remove the appliance from the box. Prior to installing the appliance, test to make sure the appliance operates properly by plugging the power supply cord into a conveniently located 120 Volt grounded outlet. Test all aspects of its operation (manual switches...

Page 9 - cm

72- BAY SLIM Description Built-in Appliance Voltage 120V AC 60Hz Watts 1465 W Max NO HEATER 25W MOTOR HEATER 19W Appliance Width 75 1/4” or 191 cm Appliance Height 26 5/8” or 67.7 cm Appliance Depth 10 5/8” or 27 cm Gross Weight 167.1 lbs or 75.8 kgs Plug Location Left side Cord Length 70 7/8” or 18...

Page 10 - SAFETY DRILL SCREW AREA; There is a safety drill screw area as show below.; HARD- WIRE INSTALLATION; should service and repair this electric appliance.

SAFETY DRILL SCREW AREA There is a safety drill screw area as show below. Please make sure that the fix screws are in this area. T h e m a n u a l c o n t r o l p a d p o s it io n S a f e t y d r i ll s c r e w a r e a ( D a r k a r e a ) HARD- WIRE INSTALLATION Turn off the appliance completely an...

Page 11 - neutral wire into “N” and the ground wire into “G”.; FOR BATHROOM USE; used it must be readily accessible.

2. Attach the wiring to the junction block. Please make sure the live wire goes into the “L”, the neutral wire into “N” and the ground wire into “G”. 3. Put the plate back and screw back. FOR BATHROOM USE If this unit is installed in a bathroom it must be protected by a GIF receptacle or circuit. If...

Page 12 - Height is measured from the base of the fireplace.; OUTDOOR INSTALLATION; The

Side of Fireplace A B The overhang (A) must extend at least 1/2 the roof-line height (B). Height is measured from the base of the ﬁreplace. For example: if the roof-line (B) is 8’ above the base of the ﬁreplace, the overhang (A) must be at least 4’. 12 OUTDOOR INSTALLATION The BAY SLIM series of ele...

Page 13 - INSTALLATION; your local builder before you install this appliance.

                                           W( ! ) D( ! ) H( ! ) 50- BAY SLIM 53 3/4 11 1/8" 27 1/8 60- BAY SLIM 63 3/4 11 1/8" 27 1/8 72- BAY SLIM 75 3/4 11 1/8" 27 1/8 40 -BAY SLIM 43 3/4 11 1/8" 27 1/8     ...

Page 19 - MEDIA OPTIONS; -The Bay Slim series models are shipped with a 10

MEDIA OPTIONS -The Bay Slim series models are shipped with a 10 piece birch media kit  1. Unscrew 2 screws and take off two brackets which are fending the front glass panel. Screws and brackets 2. After the brackets are removed, the front glass panel will fall down automatically. 4. I...

Page 20 - AUTO MODE

OPERATION The fireplace can be operated either by the switches located on the left bottom of the fireplace unit or by supplied remote control. Plug the fireplace into a 15 Amp wall socket. MANUAL OPERATION 1. The main power ON/OFF switch in position O, the fireplace is OFF. 2. When main power ON/OFF...

Page 21 - REMOTE CONTROL OPERATION; bottom left hand side is at position I.; MOOD LIGHT ON/OFF button; : Switching the color of the mood light.; FLASH button; : Press the high button to switch the heater to high heat setting

REMOTE CONTROL OPERATION For remote to function make sure the heater is plugged in and main power s witch located on the bottom left hand side is at position I. When operating the remote make sure you point the remote to the centre of the fireplace and make sure each time you press the button. The b...

Page 22 - INSTALLING WALL THERMOSTAT; WALL THERMOSTAT WIRING DIAGRAMS; Remove cover plate located on the left side of appliance.

INSTALLING WALL THERMOSTAT WALL THERMOSTAT WIRING DIAGRAMS Wire the wall thermostat prior to installing the fireplace. WALL THERMOSTAT WIRING(24 VAC) Install Wall Thermostat per instructions provided with kit and per the following information: 1. Turn off circuit breaker. 2. Remove cover plate locat...

Page 23 - This list contains replacement parts; REPLACEMENT PARTS

This list contains replacement parts NO PART NUMBER DESCRIPTION QTY 30- BAY SLIM 40- BAY SLIM 50- BAY SLIM 1 10701384 10701281 10701216 Front Clear Glass 1 2 10201505 ADJUSTABLE SCREW 2 3 3123010 FRONT CLEAR GLASS BRACKET 2 4 10702266 10702267 10702268 BOTTOM TRAY GLASS 1 5 10702271 10701284B 107012...

Page 24 - are not shown in

NO PART NUMBER DESCRIPTION QTY 60- BAY SLIM 72- BAY SLIM 1 10701217 10701218 Front Clear Glass 1 2 10201505 ADJUSTABLE SCREW 2 3 3123010 FRONT CLEAR GLASS BRACKET 2 4 10702269 10702270 BOTTOM TRAY GLASS 1 5 10701220B 10701221B BACK GLASS 1 6 10701385 SIDE CLEAR GLASS 2 7 601136B 601137B LED STRIP FO...

Page 25 - EXPLODED VIEW

Page 26 - Wiring Diagram

Page 28 - SERVICE HISTORY; This heater must be serviced annually depending on usage.; Date

SERVICE HISTORY This heater must be serviced annually depending on usage. Date Dealer Name Service technician Name Service Performed Special Concerns NOTES: 28