RCA AVC 776 - Manuals

RCA AVC 776 – Manual in PDF format online.

Manuals:

Manual

Manual RCA AVC 776

Summary

Page 2 - Safety Warning; operation may cause permanent damage.

2 Thank you for choosing this high quality Digital Multiplex Recorder. The DMR converts analog NTSC or PAL video to digital images and records them to a removable hard disk drive. Digitally recorded video has many advantages compared to analog video recorded on tape. There is no need to adjust track...

Page 3 - Full Screen; Specifications

3 Full Screen Quad 7 CH 9 CH 10 CH 13 CH 16 CH Full screen 704(H) x 468(V) <NTSC> / 704(H) x 564(V) <PAL> 4 channels 352(H) x 234(V) <NTSC> / 352(H) x 282(V) <PAL> 9 channels 224(H) x 156(V) <NTSC> / 224(H) x 188(V) <PAL> 1.2.6 Independent main and call monitor ou...

Page 4 - Package contents

4 Audio input 4 audio inputs, (RCA) Audio output 2 audio outputs, (RCA) Motion Detect Area 15 * 12 targets per camera (NTSC) / 15 * 14 targets per camera (PAL) Motion Detect Sensitivity 256 Levels Video Loss Detection Yes Refresh Rate 72 images/sec. for NTSC / 60 images/sec. for PAL Recording Rate 2...

Page 6 - You can use the PC keyboard to simulate DMR keypad.; ENTER

6 2.4 RS232 Remote Protocol You can use the PC keyboard to simulate DMR keypad. DATA: REMOTE PROTOCOL using 8 bit data 、 1 start bit 、 1stop bit ACT C0H ID FUNCTION STOP (FFH) (7FH) FUNCTION FUNCTION FUNCTION FUNCTION CODE CODE CODE CODE AS AS AS ASC C C CII II II II FUNCTION FUNCTION FUNCTION FUNCT...

Page 7 - will not operate properly.; Front panel keypad

7 3.1.3 Key lock Status Segment Power status Security status A ON Locked (Irremovable) B OFF Unlocked (Removable) You must turn key lock to “ A ” position before powering on the unit. Otherwise HDD will not operate properly. 3.1.4 The Record Time is different based on Record Speed and Record Quality...

Page 9 - Back panel connection

9 12. POWER : To power on, press power button. To power off, press power button again. 13. FF / Right : FF : Under DMR play mode, it can play video forward at high speed, and press FF again to adjust speed from 1, 2, 4, 8, 16, 32 times. Right : Under setup mode , it can work as Right button. 14. PAU...

Page 13 - ► SEARCH

13 PIN 21. PIN OFF PIN 22. ALARM INPUT 9 To connect wire from ALARM INPUT 9 ( PIN 22 ) to GND ( PIN 1 ) connector, DMR will start recording and buzzer will be on. When Menu/ Camera/ Alarm is set up to “Low” : When alarm input signal is “ Low ”, the unit starts to record and buzzer. When Menu/ Camera...

Page 14 - INT AUDIBLE ALARM : ON

14 Press ”MENU” to enter main menu. You will need to enter password to access main menu. Press “ Right ” “ Left ” to move digit, and Press ” Up ” “ Down ” to select number. Press ”ENTER” button to confirm password. Ex.: PASSWORD : 0000 (Default : 0000) PASSWORD : 0000 After keying in correct passwor...

Page 19 - SEARCH setup

19 3.5.15.3 Press ” Up ” or “ Down ” to choose BAUD RATE setup 115200 、 57600 、 19200 、 9600 、 4800 、 3600 、 2400 、 1200 3.5.15.4 Press ” MENU ” to exit and confirm current operation. 3.5.15.5 Press ” MENU ” again to exit and close SYSTEM setup mode. 3.5.16 Remote protocol ID setup: This device allo...

Page 22 - SEARCH

22 Press “ ENTER ” to confirm Full List, and the screen will be as right displayed. Press ” Up ” or “ Down ” to choose the wanted date & hour for recorded event , and press “ Left ” or “ Right ” to change the location. Press “ ENTER” to play select time recorded video. If there is no record in t...

Page 24 - RECORD QUALITY : NORMAL

24 Press ”MENU” to enter main menu. You will need to enter password to access main menu. To press “ Left ” or “ Right ” to move digit, and to press ” Up ” or “ Down ” to select number. To press ” ENTER ” button to confirm password. Ex.: PASSWORD: 0000 (Default: 0000) PASSWORD: 0000 After keying in c...

Page 26 - CAMERA setup; TITLE

26 3.9 CAMERA setup Press ”MENU” to enter main menu. You will need to enter password to access main menu.Press “ Left ” or “ Right ” to move digit, and to press ” Up ” or “ Down ” to select number. To press ” ENTER ” button to confirm password. Ex.: Password : 0000 (Default : 0000) PASSWORD : 0000 A...

Page 28 - MOTION DETECTION setup

28 EVENT : when alarm input is triggered, VCR will record alarming channel more frequently. For example : VCR normal record method is 1-2-3-4-5-……-9. In Event mode, when CH01 is triggered, the record method will become 1-2-1-3-1-4-1-5-…-9. NORMAL : when external alarm is on, VCR will record normally...

Page 29 - function same as Live video in the above mentioned.; Figure 1; LINE

29 cameras, but if the motion is detected on Camera #1, the sequence to scan #1 camera will be more frequently. It will be scanning as 1st, 2nd, 1st, 3rd, 1st, 4th...1st, 9th. The motion-detected camera will be scanned more frequently, which will be one after another camera been detected. If 2nd cam...

Page 30 - MOTION DETECTION SETUP –; ALL

30 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 032 -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- Figure 1-3 MOTION DETECTION SETUP – ALL 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 032 -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 3.11 Event 3.11.1 Enter “ Event “ list Press ”MENU” to enter main menu. You will need t...

Page 36 - Compatible HDD brands; and proven compatible with this appliance.

36 Compatible HDD brands Note 1: The models and manufactures of HDD listed above have been tested and proven compatible with this appliance. Note 2: Please remove hard disk drive ONLY after power was shut off for more than 60 seconds. This would protect and extend the operating life of the hard disk...