RadioShack VU-110XR - Manuals

2 Using Twin-Lead Cable To connect flat, twin-lead cable to your antenna: 1. Split one end of the twin-lead cable for a length of about 3 inches. Then strip about 1 / 2 inch of insulation from both leads. 2. Thread the stripped leads through the antenna’s strain- relief tab. 3. Wrap each lead around...

3 ROUTING THE CABLE TO YOURTV/VCR/FM RECEIVER If you use coaxial cable: • Use plastic tape or mast standoff insulators to secure the coaxial cable to the mast at about 3-foot intervals. Continuedown the roof and the side of the house using roof and wallstandoff insulators. • Use coaxial cable nail-i...

15-2153 04/00 Printed in the USA RadioShackA Division of Tandy CorporationFort Worth, Texas 76102 Make connections as shown if you have: • Twin-lead antenna lead-in • Twin-lead UHF terminals • Coaxial VHF terminal • Twin-lead FM antenna terminals RadioShackSplitter with 300-Ohm InputCat. No. 15-1251...