RadioShack PLRDVD7 - Manuals

RadioShack PLRDVD7 – Manual in PDF format online.

Manuals:

Manual

Manual RadioShack PLRDVD7

Summary

Page 2 - FEATURES; • A single LSI chip now integrates all; USE THIS PRODUCT SAFELY

2 FEATURES Compatible with PAL DVD (VideoCD) and NTSC DVD (Video CD) This player can play discs recorded ineither PAL or NTSC format. • A single LSI chip now integrates all major DVD playback circuit functions including MPEG2 decoder, video D/A converter, and audio decoders. • L/R stereo analog audi...

Page 3 - CONTENTS

3 CONTENTS Safety Information ........................................................................................4 Disc Notes .....................................................................................................5 The Player ..........................................................

Page 4 - SAFETY INFORMATION; Region Management Information

4 CAUTION: MOBILE DVD PLAYER IS A CLASS ILASER PRODUCT. HOWEVER THISMOBILE DVD PLAYER USES AVISIBLE/INVISIBLE LASER BEAMWHICH COULD CAUSE HAZARDOUSRADIATION EXPOSURE IF DIRECTED.BE SURE TO OPERATE THE MOBILEDVD PLAYER CORRECTLY ASINSTRUCTED.USE OF CONTROLS ORADJUSTMENTS OR PERFORMANCE OFPROCEDURES O...

Page 5 - DISC NOTES; will cause misoperation.

DISC NOTES 5 Disc formats supported by this player DVD 12 cm disc(Single-sided disc only) Video CD 12 cm disc CD 12 cm disc MP3 12 cm disc Discs which cannot be played with thisplayer • DVD-ROM• DVD-R/DVD-RAM• CDV• CD-G Handling and Cleaning • Dirt, dust, scratches and warping disc will cause misope...

Page 6 - THE PLAYER

THE PLAYER 6 14 15 5 3 10 20 1 4 8 11 9 2 7 6 5 22 14 15 16 17 18 19

Page 8 - INSTALLATION

8 INSTALLATION 1. Determine the mounting location and drill four mounting holes (See Fig.1).2. Attach the mounting bracket to the holes with the tapping screws (ø4x10).3. Let the two levers aim at the slots on the DVD bracket to fix the display unit.4. Open the monitor to display the five screw hole...

Page 9 - REPLACING THE CAR DOME LAMP; Bulb Specification; CAR DOME LAMP WIRING; Color Connection; Red

REPLACING THE CAR DOME LAMP Follow the directions shown below for a new lamp changing.1. Press the open button to eject the screen display and turn it upward.2. Position light switch to “OFF”.3. Push back the lamp cover and open it. (Refer to the following figure)4. Remove and discard the old lamp.5...

Page 10 - ELECTRIC CONNECTION; CIGARETTE LIGHTER

10 ELECTRIC CONNECTION VIDEO OUT AUDIO L OUT AUDIO R OUT VIDEO IN AUDIO L IN AUDIO R IN DC 12V IN CIGARETTE LIGHTER YELLOW WHITE RED YELLOW WHITE RED DIGITAL AUDIO

Page 11 - REMOTE CONTROL; LOCATION AND FUNCTION KEYS

11 REMOTE CONTROL LOCATION AND FUNCTION KEYS 6 1 3 7 11 4 8 10 5 9 12 13 14 16 15 17 20 18 19 24 21 28 22 32 23 25 29 27 26 31 30 2

Page 13 - Preparing the Remote Control; Inserting the Batteries; IR; mark (remote control; Loading a Disc; POWER; Insert the disc with printed side facing; Ejecting a Disc; Press; LOADING/EJECTING A DISC

13 REMOTE CONTROL Preparing the Remote Control Inserting the Batteries 1. Open the battery compartment cover.2. Insert the new batteries. Make sure that the positive and negative terminals of the batteries are orientedas indicated. 3. Close the cover Battery: Two AAA size battery. Using the Remote C...

Page 14 - OPERATION; BASIC PLAY

14 OPERATION BASIC PLAY STOPPING PLAY - Brief press the (Stop) button to stop the unit playback, when the (Play)button is pressed, normal playback willcontinue. - Press (Stop) button twice to stop the playback and go back to initial Track/Chapter. RAPID FORWARD/RAPID REVERSE Press & during play....

Page 15 - ZOOM

VOLUME LEVEL ADJUSTMENT Press VOL +/VOL - on the front panel or VOLUME +/- on the remote control to increase or decrease the volume level. LIGHT SWITCH The two car dome lamps on the unit willbe on in some needed situations. Thereare three settings for the car dome lampoperation: OFF, AUTO, and ON, r...

Page 17 - MULTI-AUDIO LANGUAGE FUNCTION

(4) Press DISPLAY for the fourth time: (5) Press DISPLAY for the fifth time: The message on the screen will be cleared. MP3 (When set to NO MENU in SMARTNAV item): (1) Press DISPLAY for the first time: (2) Press DISPLAY for the second time:. (3) Press DISPLAY for the third time: The message on the s...

Page 18 - MP3 DISC PLAY

18 TITLE MENU FUNCTION(FOR DVD ONLY) If the DVD has multiple titles recorded onthe disc. It can select preferred title fromthe title menu to start playback.- Press TITLE during playback. The title menu is display. - Press the cursor button shown in screen display, select preferred titleby the cursor...

Page 19 - SETUP; GENERAL SETUP; INITIAL SETUP

19 SETUP GENERAL SETUP --- GENERAL PAGE --- TV display setup This is to select the appropriate TVaspect (4:3 or 16:9) according to theconnected TV set. Normal/PS (For 4:3 TV) Played back in the PAN & SCAN style.(If connected to wide-screen TV, the leftand right edges are cut off.) Normal/LB (For...

Page 20 - OSD LANG type setup

20 SETUP --- GENERAL PAGE --- OSD LANG type setup Select the preferred OSD (On SreenDisplay) language by using the /buttons. --- GENERAL PAGE --- CAPTIONS setup Activate the CAPTIONS feature byselecting ON. And deactive this featureby selecting OFF. TV DISPLAY PIC MODE ANGLE MARK OSD LANG CAPTIONS S...

Page 21 - SCR SAVER setup; SPEAKER SETUP; S P D I F

--- GENERAL PAGE --- SCR SAVER setup Select the SCR SAVER ON/OFF. SPEAKER SETUP --- SPEAKER SETUP PAGE --- This is to activate the audio output from DOLBY AC3 5.1 DOWNMIX to 2 channel mode. Select the preferred SPEAKER connection by using the cursor buttons. - Select the LT/RT to activate the Dolby ...

Page 22 - PREFERENCES SETUP; TV type setup

22 SETUP PREFERENCES SETUP --- PREFERENCES PAGE --- TV type setup This player can play discs recorded ineither PAL or NTSC format.Select NTSC format, when youconnected to NTSC TV.Select PAL format, when you connectedto PAL TV.Select AUTO format, the player TV outputformat will be according to the DV...

Page 23 - SUBTITLE language setup

23 SETUP --- PREFERENCES PAGE --- SUBTITLE language setup Select the preferred SUBTITLE languageby using the cursor buttons. --- PREFERENCES PAGE --- DISC MENU language setup Select the preferred DISC MENUlanguage by using the cursor buttons. --- PREFERENCES PAGE --- PARENTAL Select suitable parenta...

Page 24 - LOGO; DEFAULTS; DEFAULTS TABLE

--- PREFERENCES PAGE --- LOGO Select ORIG LOGO (original picture whenthe unit turns on) or CUSTLOGO(customer-set picture when the unit turnson). 24 SETUP --- PREFERENCES PAGE --- DEFAULTS Select reset to become factory initialsetting. --- PREFERENCES PAGE --- SMART NAV In this item, you can select N...

Page 25 - TROUBLE SHOOTING

If it appears that your DVD unit is faulty,first consult this checklist. It may be thatsomething simple has been overlooked. Under no circumstances should youtry to repair the player yourself, as thiswill invalidate the warranty. Onlyqualified service personnel can removethe cover or service this pl...

Page 26 - SPECIFICATIONS

SPECIFICATIONS Supply Voltage : 12V DC (11V-15V), test voltage 14.4V, negative ground Current Consumption : Less than 2A Signal System : Compositive video 1.0Vp-p 75 Ω Discs Played : (1) DVD-VIDEO Disc 5” (12 cm) single-sided, single-layer5” (12 cm) single-sided, double-layer (2) Compact Disc (CD-DA...