RadioShack ET-1111 - Manuals

5 CONTENTS Installation ............................................................................................................... 6 Mounting the Phone ........................................................................................... 6 On a Desk ..........................................

6 INSTALLATION MOUNTING THE PHONE You can place the ET-1111’s base on adesk or table, mount it on a standardwall plate, or mount it directly on a wall.Choose a location that is: • near an AC outlet • near a telephone line jack • out of the way of normal activities • away from electrical machinery, e...

7 4. Route the adapter’s cord through the strain relief slot on the bottom ofthe base. 5. Plug the adapter into a standard AC outlet. 6. Lift the base’s antenna to a vertical position. On a Wall Plate or Wall 1. Plug one end of the supplied short modular cord into the TEL LINE jack on the back of th...

8 2. Plug one end of the supplied long modular cord into the TEL LINE jack on the back of the base. 3. Route the adapter and modular cords through the grooves on thebottom of the base. 4. Align the base’s keyhole slots with the mounting screws and slide thebase downward to secure it. CONNECTING AND ...

10 2. Lift the handset, press TALK , and listen for a dial tone. 3. Press any number other than 0. Note: If your phone system requiresthat you dial an access code (9, forexample) before you dial an outsidenumber, do not dial the access codeeither. If the dial tone stops, you havetouch-tone service. ...

12 TELEPHONE OPERATION MAKING AND RECEIVING CALLS To make a call, lift the handset andpress TALK (the CHARGE/IN USE indi- cator on the base lights), then dial thenumber. You view the number as you di-al, then (after a few seconds) the call’selapsed time. Notes: • You can also dial the number before ...

13 Note: If you do not have any specialphone services, pressing FLASH might disconnect the current call. USING TONE SERVICES ON A PULSE LINE Some special services, such as bank-by-phone, require tone signals. If youhave pulse dialing, you can still usethese special tone services by followingthese st...

16 To view the stored phone numbers,press . An arrow to the right of the number means it is longer than 14 digits.Press again to view the rest of the number. Repeatedly press to return to the name display. To exit the memory number list, press MEM . To view a stored name and phone num-ber at the sam...

18 CALLER ID OPERATION If you subscribe to Caller ID service fromyour phone company, the phone compa-ny sends information about the call, aswell as the time and date, between thefirst and second rings of every call youreceive. The ET-1111 displays this informationwhen it receives a call, and it stor...

20 Caller ID Messages Display Description New :XX Total:XX Shows the number of new Caller ID records (records you have not reviewed) and the total number of records. Private Name or Private Number The caller has blocked the Caller ID information from being sent. Unknown Name or Unknown Number The ca...

21 TROUBLESHOOTING We do not expect you to have any problems with your phone, but if you do, the follow-ing suggestions might help. Problem Suggestion The phone does not work or works poorly. Be sure the base’s phone line cord and AC adapter are correctly and securely connected. Be sure the battery ...

23 CARE AND MAINTENANCE Your RadioShack ET-1111 900 MHz Digital Spread Spectrum Cordless Telephoneis an example of superior design and craftsmanship. The following suggestions willhelp you care for your ET-1111 so you can enjoy it for years. Keep the ET-1111 dry. If it gets wet, wipe it dry immediat...

25 THE FCC WANTS YOU TO KNOW In the unlikely event that your phonecauses problems on the phone line, thephone company can temporarily discon-tinue your service. If this happens, thephone company attempts to notify you inadvance. If advance notice is not practi-cal, the phone company notifies you ass...

26 NOTES 43-1111.fm Page 26 Tuesday, June 29, 1999 3:38 PM