RadioShack ET-1109 - Manuals

Page 2 - FEATURES; Adjustable Ringer/Tone Volume —; lets you choose between two volumes; Security Access-Protection Code —; automatically prevents other cordless

2 FEATURES Your RadioShack ET-1109 900 MHzDigital Cordless Telephone uses ad-vanced technology to give you superioraudio quality and extended range. The ET-1109’s Caller ID unit recordseach caller’s telephone number (andname, if available in your area) and thedate and time of the call, as provided b...

Page 3 - Important Caller ID Information; • caller’s number only; CAUTION

3 Tone or Pulse Dialing — lets you usetone or pulse (rotary) dialing and letsyou switch from pulse to tone dialing forlong-distance, bank-by-phone, or otherspecial services. Redial — lets you quickly redial any ofthe last three numbers dialed. Flash — sends an electronic switch-hook signal for use w...

Page 4 - FCC STATEMENT; FCC Rules

4 Important: • Cordless phones such as this one require AC power to operate. Whenthe power is off, you cannot make orreceive calls using your ET-1109. Tobe safe, you should also have aphone that does not need AC powerto operate (not a cordless phone),so you can still make and receivecalls if there i...

Page 5 - CONTENTS

5 CONTENTS Installation ............................................................................................................ 6 Mounting the Phone ........................................................................................ 6 On a Desk ................................................

Page 6 - INSTALLATION; MOUNTING THE PHONE; DC IN 9V; On a Desk; TEL LINE

6 INSTALLATION MOUNTING THE PHONE You can place the phone on a desk ortable, mount it on a standard wall plate,or mount it directly on a wall. Select a location that is: • near an AC outlet • near a telephone line jack • out of the way of normal activities • away from electrical machinery, electrica...

Page 7 - On a Wall Plate or Wall

7 3. Route the adapter’s cord through the strain relief slot on the bracket. 4. Plug the adapter into a standard AC outlet. 5. Lift the base’s antenna to a vertical position. On a Wall Plate or Wall 1. Plug one end of the supplied short modular cord into the TEL LINE jack on the back of the base as ...

Page 9 - TALK; Low Battery

9 To charge the battery pack, place thehandset either faceup or facedown onthe base. The CHARGE/IN USE indica-tor on the base lights and Total:00 appears on the handset display. Recharge the battery pack when Low Battery flashes on the display. Important: Be sure the battery pack isproperly connecte...

Page 13 - OPERATION

13 OPERATION MAKING AND RECEIVING CALLS To make a call, lift the handset andpress TALK (the CHARGE/IN USE indi- cator on the base lights), then dial thenumber. The number displays on thehandset as you dial, then (after a fewseconds) the call’s elapsed time dis-plays. You can also dial the number bef...

Page 15 - PAGING; FIND; MEMORY DIALING; MEM; Memory; SELECT; Store

15 PAGING To send a page from the base to thehandset or to locate the handset, whenthe phone is not in use, press PAGE/ FIND on the base. The handset beeps for 5 seconds. To locate the handset using a continu-ous beep, press and hold PAGE/FIND longer than 5 seconds. Press any key or place the handse...

Page 18 - USING A HEADSET

18 Testing Stored Emergency Numbers If you store an emergency service’snumber (police department, fire depart-ment, ambulance) and you choose totest the stored number, make the testcall during the late evening or earlymorning hours to avoid peak demandperiods. Also, remain on the line to ex-plain th...

Page 19 - CALLER ID OPERATION; FLASH; End

19 CALLER ID OPERATION If you subscribe to Caller ID service fromyour phone company, the phone compa-ny sends information about the call, aswell as the time and date, between thefirst and second rings of every call youreceive. The ET-1109 displays this informationwhen it receives a call, and it stor...

Page 20 - Caller ID Messages

20 Caller ID Messages DIALING NUMBERS FROM A CALLER ID RECORD To dial a local number stored in a CallerID record, recall the record, then press TALK . If it is a long distance call, press 1 ( 1 appears before the displayed num- ber) before you press TALK . Note: If a Caller ID record does not con-ta...

Page 22 - TROUBLESHOOTING; Problem; Low; Press

22 TROUBLESHOOTING We do not expect you to have any problems with your ET-1109, but if you do, thesesuggestions might help. Problem Suggestion The phone does not work or works poorly. Be sure the base’s phone line cord and AC adapter are correctly and securely connected. Be sure the battery pack in ...

Page 24 - CARE AND MAINTENANCE

24 CARE AND MAINTENANCE Your RadioShack ET-1109 900 MHz Digital Cordless Telephone is an exam-ple of superior design and craftsmanship. The following suggestions will helpyou care for your ET-1109 so you can enjoy it for years. Keep the ET-1109 dry. If it gets wet, wipe it dry immediately. Liq-uids ...

Page 26 - LIGHTNING

26 THE FCC WANTS YOU TO KNOW In the unlikely event that your phonecauses problems on the phone line, thephone company can temporarily discon-tinue your service. If this happens, thephone company attempts to notify you inadvance. If advance notice is not practi-cal, the phone company notifies you ass...

Page 27 - NOTES

27 NOTES 43-1109.fm Page 27 Friday, June 18, 1999 10:26 AM

Page 28 - Limited One-Year Warranty

RadioShack A Division of Tandy Corporation Fort Worth, Texas 76102 UCZZ0617ZZ 06A99 Printed in the Philippines Limited One-Year Warranty This product is warranted by RadioShack against manufacturing defects in material and workman-ship under normal use for one (1) year from the date of purchase from...