Page 2 - INTRODUCTION; preprogrammed
Need help? Call 1-800-955-2599 2 INTRODUCTION Your RadioShack 3 in 1 Easy Remote can re-place up to three standard infrared remote con-trols. Unlike some universal remote controls, the 3 in 1is preprogrammed and does not have to learn its commands from the original remote controls. Allyou have to do...
Page 3 - CONTENTS
Need help? Call 1-800-955-2599 3 CONTENTS How the 3 in 1 Works ..................................... 4 Preparation ..................................................... 5 Installing Batteries ...................................... 5Setting Up Your Remote Control ................ 6 Operation ...........
Page 4 - HOW THE 3 IN 1 WORKS; device
Need help? Call 1-800-955-2599 4 HOW THE 3 IN 1 WORKS Before you begin to use the 3 in 1, it is helpful tounderstand a little about how it works — nothingtechnical, only an idea of what you can expectfrom it. After you set up the 3 in 1, its command keys worklike the keys on your original remote con...
Page 5 - PREPARATION; INSTALLING BATTERIES
Need help? Call 1-800-955-2599 5 PREPARATION INSTALLING BATTERIES Cautions: • Be sure to have fresh batteries ready to install before you remove the old batteries.The 3 in 1’s memory only lasts about aminute without the batteries. If the memory islost, simply re-enter the 3-digit manufactur-ers’ cod...
Page 8 - OPERATION; PUNCH THROUGH
Need help? Call 1-800-955-2599 8 OPERATION 1. Press the device key for the device you want to control. 2. Point the 3 in 1 toward the device and press PWR to turn it on. 3. Repeat Steps 1 and 2 for other devices. 4. Point the 3 in 1 toward the device you want to control and press the appropriate dev...
Page 9 - FAVORITE CHANNEL SCAN
Need help? Call 1-800-955-2599 9 If you want to turn off the punch-through featureand control the volume through your cable box,hold down P until the red indicator blinks twice. Release P , then press 9 9 3 CBL . When the indi- cator blinks twice, you can control the volumethrough your cable box. If...
Page 10 - Note: You must press; Clearing Favorite Channel Scan
Need help? Call 1-800-955-2599 10 3. Enter the channel number of the first channel you want to include in your favorite channellist. Then press P . Note: You must press 0 before entering a single digit channel number. If you are enter-ing a channel that is three digits long, suchas 103, you do not h...
Page 11 - MANUFACTURERS’ CODES
Need help? Call 1-800-955-2599 11 MANUFACTURERS’ CODES The following lists show which 3-digit codes to en-ter to set up the 3 in 1 for your remote-controlleddevices. Notes: • The 3 in 1 might not always have every com- mand that your original remote controlshave. • Use the label included with the 3 ...
Page 24 - IF YOU HAVE PROBLEMS; MANUAL CODE SEARCH
Need help? Call 1-800-955-2599 24 IF YOU HAVE PROBLEMS MANUAL CODE SEARCH If the 3 in 1 does not control your remote-con-trolled devices when you first set it up, you prob-ably did not enter the correct 3-digit codes foryour devices. You can try all the codes for the brand of your de-vice, or becaus...
Page 26 - TROUBLESHOOTING
Need help? Call 1-800-955-2599 26 TROUBLESHOOTING If the 3 in 1 stops working after you successfullytest the control of each device, or if you are un-able to get the 3 in 1 to work at all, check the fol-lowing: • Be sure you press the device key for the device you want to control. • Check and replac...
Page 27 - CARE AND MAINTENANCE
Need help? Call 1-800-955-2599 27 CARE AND MAINTENANCE Your 3 in 1 Easy Remote is an example of supe-rior design and craftsmanship, and should betreated with care. The suggestions below will helpyou enjoy the 3 in 1 for many years. • Keep the 3 in 1 dry. If it gets wet, wipe it dry immediately. Liqu...
Page 28 - SPECIFICATIONS
RadioShack A Division of Tandy Corporation Fort Worth, Texas 76102 3/97 Printed in Korea SPECIFICATIONS Power ................................Two AAA Alkaline Batteries IR Control Range..................................25 Feet (7.5 m) Size (HWD) .......................... 1 1 / 8 ¥ 1 13 / 16 ¥ 6 3 /...