RadioShack 7-in-1 Remote Control with Lighted Keypad - Manuals

Need help? Call 1-800-989-4706 7 PREPARATION INSTALLING BATTERIES You need four AAA batteries to power your re-mote control. We recommend alkaline batteries,such as RadioShack Cat. No. 23-558. Cautions: • Use only fresh batteries of the required size and recommended type. • Do not mix old and new ba...

Need help? Call 1-800-989-4706 8 LIGHTING THE KEYS Press to light the keys on the remote for about 5 seconds. If you press a key when the keys arelit, the keys stay lit for about 5 more seconds. To turn off the light before it automatically turnsoff, press again. DEVICE TYPES You can use the 7-in-1 ...

Need help? Call 1-800-989-4706 9 SETTING UP YOUR 7-IN-1 1. Refer to “Manufacturers’ Codes” on Page 23 and write down the codes for your originalremote controls. Notes: • Some manufacturers have several possi- ble codes listed. Try each until you find theright one. See “If You Have Problems” onPage 2...

Need help? Call 1-800-989-4706 10 5. Point the 7-in-1 Remote Control at your device and press POWER (All Lts On) (or CHANNEL + (On) for some cable boxes). Your device should turn off (or on, if it was off). If the remote does not operate your device,try the other codes listed in “Manufacturers’Codes...

Need help? Call 1-800-989-4706 11 OPERATION 1. Press the device key for the device you want to control, then point the 7-in-1 at the deviceand press POWER (All Lts On) (or CHANNEL + (On) for some cable converters) to turn the device on. 2. Repeat Step 1 for all other devices you want to operate. 3. ...

Need help? Call 1-800-989-4706 12 In this case, you must press the desireddevice key before you use the remote con-trol’s CHANNEL + (On) or CHANNEL – (Off) keys. • If you selected AUX1 or AUX2 , you can punch-through TV , VCR , or CBL if you have not programmed AUX1 or AUX2 as a TV, VCR, or CBL devi...

Need help? Call 1-800-989-4706 13 Entering a Plug ’n Power House Code Your IR Command Console or Plug ’n PowerWireless Remote Control System uses a mastercode called a house code (see your IR Command Console’s or Plug ‘n Power Wireless RemoteControl System’s Owner’s Manual for more infor-mation). 1....

Need help? Call 1-800-989-4706 16 9. To brighten or dim lights connected to lamp and appliance modules, press the digit keyfor the module you want to control. Thenhold down VOLUME + (Brt) or VOLUME – (Dim) on the 7-in-1. Release the key when the desired level of brightness is reached. Note: You must...

Need help? Call 1-800-989-4706 18 • You can store a command into any of the 7- in-1’s keys except SET UP , LEARN , Plug ’n Power, TV , VCR , CBL , CD , AUX1 , AUX2 , SAT , SHIFT , ENT , and TIMER . • You can store a command in one of the 7-in- 1’s keys where you have to press SHIFT then the key to a...

Need help? Call 1-800-989-4706 19 from a VCR’s original remote control, press PLAY on the 7-in-1. If the key you want to program is alreadyused for another command, press SHIFT before pressing the key. For example, tostore the command SHIFT-PLAY, press SHIFT then PLAY on the 7-in-1. 7. On the origin...

Need help? Call 1-800-989-4706 20 IF YOU HAVE PROBLEMS MANUAL CODE SEARCH If the 7-in-1 Remote Control does not operateyour remote-controlled devices when you first setit up, you might have to manually find the correctcode for your devices. You can try all the codeslisted in “Manufacturers’ Codes” o...

Need help? Call 1-800-989-4706 21 • Because the 7-in-1’s library has so many codes, this procedure can take severalminutes. • If your device turns off during the search, but does not operate after you lock in thecode, begin the search again, pausinglonger between key presses. If necessary, repeat th...

Need help? Call 1-800-989-4706 22 TROUBLESHOOTING If the 7-in-1 Remote Control stops working afteryou have successfully tested the control for eachdevice, or if you are unable to get the remote con-trol to work at all, check these things: • Be sure you press the device key for the device you want to...

Need help? Call 1-800-989-4706 23 MANUFACTURERS’ CODES The following list tells you which 3-digit codes toenter to set up the 7-in-1 Remote Control. Notes: • The 7-in-1 Remote Control might not have every command of your original remote con-trols. • A key on the 7-in-1 Remote Control that has the sa...

Need help? Call 1-800-989-4706 43 CARE AND MAINTENANCE Your RadioShack 7-in-1 Remote Control is an ex-ample of superior design and craftsmanship. Thefollowing suggestions will help you care for your7-in-1 so you can enjoy it for years. Keep the 7-in-1 dry. If it gets wet,wipe it dry immediately. Liq...

Need help? Call 1-800-989-4706 44 SPECIFICATIONS Power ....................................... 4 AAA Batteries Control Range: IR .................................... 20 Feet (6.096 M)RF .................................. 100 Feet (30.48 M) Dimensions (HWD) ...... 8 1 / 2 ¥ 2 7 / 16 ¥ 1 1 / 16 Inches...

Need help? Call 1-800-989-4706 45 NOTES 15-1924.fm Page 45 Monday, July 19, 1999 12:50 PM