Page 2 - INTRODUCTION; The 6 in 1 RF Remote Control’s features include:
Need help? Call 1-800-950-7044! 2 INTRODUCTION Your Radio Shack 6 in 1 RF Remote Control systemhas a remote control and RF command console thatmake up a complete home control system, allowing youto send commands to most IR (infrared) controlled de-vices from any room in your home, up to 100 feet awa...
Page 4 - CONTENTS
Need help? Call 1-800-950-7044! 4 CONTENTS How the System Works .......................................... 5 A Look at the System’s Remote Control ............ 5 Setting Up the System ........................................... 7 Installing Batteries in the Remote Control .......... 7Setting Up the ...
Page 5 - HOW THE SYSTEM WORKS; tem’s remote control.
Need help? Call 1-800-950-7044! 5 HOW THE SYSTEM WORKS When you press a key on the system’s remote control,it sends a powerful RF signal to the RF command con-sole, which then sends a corresponding IR signal to IRremote controlled-devices in the same room as thecommand console. A LOOK AT THE SYSTEM’...
Page 6 - • When you use the system’s remote control to; Key
Need help? Call 1-800-950-7044! 6 The system’s remote control also has these specialkeys. Notes: • The remote control’s red light turns on when you press a key, and blinks when you enter a functionor manufacturer’s code. • When you use the remote control’s RECORD key, you must press it twice. This s...
Page 7 - SETTING UP THE SYSTEM
Need help? Call 1-800-950-7044! 7 SETTING UP THE SYSTEM INSTALLING BATTERIES IN THE REMOTE CONTROL Your system’s remote control uses four AAA batteries(not supplied) for power. We recommend alkaline bat-teries, such as Radio Shack Cat. No. 23-555. Followthese steps to install the batteries. 1. Press...
Page 8 - Press down and hold; until the red indica-; Repeat Steps 2–4 for additional devices.
Need help? Call 1-800-950-7044! 8 3. Press down and hold SET UP until the red indica- tor blinks twice, then release it and enter the 3-digit manufacturer’s code. For example, to replace a Panasonic TV’s remotecontrol (manufacturer’s code 051), press: TV SET UP 0 5 1 When the indicator blinks twice ...
Page 10 - OPERATION
Need help? Call 1-800-950-7044! 10 OPERATION Each of the system’s remote control device keys arepreset to control particular devices, as shown in thislist. TV — TVs only CBL — Cable converters, satellite receivers, and video accessories VCR — VCRs, laser disc players, cassette decks, and digital aud...
Page 12 - SPECIAL FUNCTIONS; Telephone Programming; After providing the brand and model information; until the red indicator blinks
Need help? Call 1-800-950-7044! 12 SPECIAL FUNCTIONS Telephone Programming The telephone programming feature lets you have themanufacturers’ codes for your remote-controlled devic-es programmed into your remote control by phone! Justcall 1-800-950-7044 and provide the Customer ServiceRepresentative ...
Page 13 - Fast Search
Need help? Call 1-800-950-7044! 13 4. Hold the system’s remote control up to your tele- phone’s earpiece. Note: You must hold the telephone’searpiece over the remote control’sbattery compartment. If you do not,the system’s remote control mightnot be able to properly receive the in-formation coming o...
Page 15 - Sequences
Need help? Call 1-800-950-7044! 15 Notes: • You must enter a zero before a single-digit channel number (01, 02, 03, and so on). • If you normally press ENTER after entering a channel number to change to a new channel,you must press ENTER instead of SET UP . 5. Repeat Step 4 to continue entering chan...
Page 16 - Note: If you normally press
Need help? Call 1-800-950-7044! 16 Note: If you normally press ENTER after entering a channel number, you must also include ENTER in your sequence. 4. To store the sequence, press and hold down SET UP until the red indicator light blinks twice. Whenever you press the selected sequence key ( AU- DIO ...
Page 18 - PLUG ’N POWER
Need help? Call 1-800-950-7044! 18 PLUG ’N POWER The Plug ’n Power feature lets you use the system tocontrol lamps and appliances with Plug ’n Power mod-ules, available at your local Radio Shack store. Follow these steps to control Plug ’n Power moduleswith the system’s remote control and RF command...
Page 21 - MANUFACTURERS’ CODES; SETUP CODES FOR TELEVISIONS
Need help? Call 1-800-950-7044! 21 MANUFACTURERS’ CODES The following list tells you which 3-digit codes to enterto set up the 6 in 1 RF Remote Control System’s re-mote control. Notes: • Use the supplied label to record the manufactur- ers’ codes for your remote-controlled devices. • The system’s re...
Page 27 - SETUP CODES FOR VCRS
Need help? Call 1-800-950-7044! 27 SETUP CODES FOR VCRS Action 317 Aiwa 000 Akai 041, 049,106, 242, 156, 053, 061 Bell & Howell 104 Broksonic 211, 184, 121, 361 Canon 035, 167 Carver 081, 110 Craig 240, 047, 271 Curtis Mathes 035, 060 Daewoo 020, 278, 017, 087, 045 Daytron 020 Dynatech 000 Emers...
Page 30 - Realistic
Need help? Call 1-800-950-7044! 30 SETUP CODES FOR VCRS (continued) Realistic 16-25116-40416-40616-40816-410 16-411 16-41416-47216-50316-50516-50616-50716-50816-510 16-511 16-51216-51316-51416-51516-51616-51816-51916-52016-52116-52216-52916-53016-53316-53416-53516-53616-53716-54116-54216-54416-56316...
Page 33 - SETUP CODES FOR LASER DISCS
Need help? Call 1-800-950-7044! 33 SETUP CODES FOR LASER DISCS Aiwa 203 Carver 203 Denon 172 Disco Vision 023 Funai 203 Hitachi 023 Kenwood 258 Magnavox 241, 064 Marantz 064 Mitsubishi 059 NAD 059 Panasonic 204 Philips 064 Pioneer Unified 023, 059 RCA 128, 351 Realistic16-302 203 Sharp 001 Sony 193,...
Page 36 - SETUP CODES FOR CABLE CONVERTERS
Need help? Call 1-800-950-7044! 36 SETUP CODES FOR CABLE CONVERTERS (continued) Century 153 Citizen 153, 315 Contec 019 Eastern 002 GC Electronics 056, 207 GE 233, 232 Gemini 057, 070, 015, 242 General Instru-ments 011, 003, 476 Hamlin 020, 034, 259, 009 Hitachi 011 Jasco 153, 315 Jerrold 003, 014, ...
Page 42 - SETUP CODES FOR AUDIO AMP/TUNERS
Need help? Call 1-800-950-7044! 42 SETUP CODES FOR AUDIO AMP/TUNERS Adcom 002, 304, 319 Aiwa 121, 158, 064, 301, 405, 361 Akai 076, 450 Carver 008, 042, 270, 189, 360 Casio 195 Denon Unified 004 Fisher 042, 360 GE 260 Garrard 146, 286, 407 Goldstar 057 Harman Kardon 110, 107 Inkel 066, 062 JVC 074 K...
Page 45 - SETUP CODES FOR AUDIO AMPLIFIERS
Need help? Call 1-800-950-7044! 45 SETUP CODES FOR AUDIO AMPLIFIERS (continued) Optimus 31-202231-210031-210531-210631-210731-212031-301831-301931-302131-302231-302431-302531-302631-302731-302831-302931-303031-3031 395395395395395395395395395395013013013013013300300300 Philips 269 Pioneer 300, 257 P...
Page 46 - SETUP CODES FOR MISCELLANEOUS AUDIO
Need help? Call 1-800-950-7044! 46 SETUP CODES FOR MISCELLANEOUS AUDIO ADC 086 Aiwa 010, 159, 404 AudioSource 351 BSR 086 Carver 351 Denon 359 Fisher 052 Harman Kardon 477 JVC 073 Jerrold 459 KLH 351 Luxman 326 Mitsubishi 132 NEC 236 Pioneer 089, 248 Proton 046 RCA 056, 248 Realistic 13-9185 376 Sch...
Page 47 - SETUP CODES FOR AUDIO CASSETTE DECKS
Need help? Call 1-800-950-7044! 47 SETUP CODES FOR AUDIO CASSETTE DECKS ADC 171 Aiwa 029 Akai 188, 189 Carver 029 Denon Unified 076 Fisher 074 Garrard 300, 439 Harman Kardon 182 JVC 244 Kenwood 070, 071, 092 Kyocera 171 Luxman Unified 091, 095 Magnavox 029 Marantz 029 NAD 144 NEC 165 Nakamichi 147 O...
Page 49 - IF YOU HAVE PROBLEMS; SEARCHING THE CODE LIBRARY
Need help? Call 1-800-950-7044! 49 IF YOU HAVE PROBLEMS SEARCHING THE CODE LIBRARY If the 6 in 1 RF Remote Control System’s remote con-trol does not operate your remote-controlled deviceswhen you first set it up, you probably haven’t enteredthe correct 3-digit codes for your devices. You can tryall ...
Page 50 - TROUBLESHOOTING; • Use manual controls or the original remote control
Need help? Call 1-800-950-7044! 50 TROUBLESHOOTING If the system’s remote control stops working after yousuccessfully test the control of each device, or if youare unable to get the remote control to work at all,check the following: • Use manual controls or the original remote control to confirm tha...
Page 51 - FCC CAUTION; FCC; , which are designed to provide reasonable pro-
Need help? Call 1-800-950-7044! 51 FCC CAUTION This equipment generates and uses radio frequencyenergy, and if not installed and used properly, that is, instrict accordance with the manufacturer’s instructions,may cause interference to radio and television recep-tion. It has been type tested and fou...
Page 52 - CARE AND MAINTENANCE
Need help? Call 1-800-950-7044! 52 CARE AND MAINTENANCE Your Radio Shack 6 in 1 Remote Control system is anexample of superior design and craftsmanship. The fol-lowing suggestions will help you care for your systemso you can enjoy it for years. • Keep the system’s remote control and RF com- mand con...
Page 53 - SPECIFICATIONS; Remote Dimensions . 2
Need help? Call 1-800-950-7044! 53 SPECIFICATIONS Remote Power....................... 4 AAA Alkaline Batteries RF Command Console Power................. 120 Volts AC Remote to RF Command ConsoleRange .............................................100 Feet (304.8 m) RF Command Console to DeviceRange .....
Page 54 - NOTES
Need help? Call 1-800-950-7044! 54 NOTES 15-1919.fm Page 54 Monday, July 19, 1999 12:34 PM
Page 56 - RADIO SHACK LIMITED WARRANTY
RADIO SHACK A Division of Tandy Corporation Fort Worth, Texas 76102 11/95 Printed in the USA RADIO SHACK LIMITED WARRANTY This security product is warranted against manufacturingdefects in material and workmanship for ninety (90) daysfrom the date of purchase from Radio Shack companyowned stores and...