RadioShack 43-3857 - Manuals

Important C a ller ID Informat ion 6 IMPORTANT CALLER ID INFORMATION To use Caller ID and Caller ID on Call Waiting, you must be in an area where those services are available and you must subscribe to those services through your local phone company. Where Caller ID is offered, one or more options ar...

Installation 7 Your telephone connects directly to a modular telephone line jack. If your telephone wiring does not have a modular jack, you can update the wiring yourself using jacks and adapters (available at your local RadioShack store or online at RadioShack.com), or have the telephone company u...

Installation 8 2. Lift the battery pack out of the compartment. 3. Plug the battery pack’s connector into the socket in the compartment. The connector fits only one way. 4. Put the battery pack in the compartment. 5. Replace the cover. To charge the battery pack, place the handset on the base, face ...

Installation 9 S ETTING M ENU O PTIONS There are five setup options: AutoTalk, CIDCW (Caller ID on Call Waiting), Area Code, Dial Mode and Language. AutoTalk allows you to answer the phone without pressing the TALK/FLASH button. If the phone rings when AutoTalk is on, simply remove the handset from ...

Installation 10 4. Use the number keys ( 0 to 9 ) or CH/DELETE to enter the three-digit area code. Ô 5. Press REMOTE/SELECT . A confirmation tone sounds and the displayed area code is entered. 6. Press END or return the handset to the base unit to complete the setting. The handset returns to the sta...

Operation 11 OPERATION M AKING AND R ECEIVING C ALLS Even when you turn off the base’s ringer, you can still make or receive calls using this phone. Telephones on the same line and the handset (if its ringer is not turned off) still ring when there is an incoming call. Action Handset On Base Handset...

Operation 12 A DJUSTING THE H ANDSET R INGER AND E ARPIECE V OLUME Handset Ringer Tone and Volume Press VOL or VOL repeatedly in standby mode to select one of five ringer tones and volume combinations. Earpiece Volume Press VOL or VOL repeatedly during a call to change the earpiece volume of the han...

Memory Diali n g 13 T RAVELING O UT - OF -R ANGE During a call, as you begin to move your handset too far from your base unit, noise increases. If you pass the range limits of the base unit, your call will terminate within one minute. S ELECTING A D IFFERENT C HANNEL If you encounter interference wh...

Memory Dial ing 14 1. Press MEM. Select Memory is displayed. 2. Press VOL or VOL , or enter a number (0- 9) to select the memory location where you would like to store the number. 3. Press MEM or REMOTE/SELECT . 4. Press MEM or REMOTE/SELECT . A cursor flashes indicating that the display is ready fo...

Memory Diali n g 15 • Use PAUSE/REDIAL to enter a pause in the dialing sequence. The display shows a P . Ô Each pause counts as one digit and represents a two second delay of time between the digits as they are sent. • Use CH/DELETE to delete digits as needed. 8. Press MEM or REMOTE/SELECT . You wil...

Memory Dial ing 16 If You Make a Mistake while Entering a Name Use /TONE/< or #/ > to move the cursor to the incorrect character, press CH/DELETE to erase up to the wrong entry. Then enter the correct character. To delete all characters, press and hold CH/DELETE . For example, to enter John; Ô...

Memory Diali n g 17 2. Press VOL or VOL , or enter a number (0- 9) to select the memory location you would like to dial. Ô 3. Press TALK/FLASH . Talk and the volume setting appear on the display. Then the displayed number is dialed. Memory Dialing from Talk Mode 1. Press TALK/FLASH . Talk and the vo...

Memory Dial ing 18 The screen appears with the memory location number that you have selected in the display. 3. Press MEM or REMOTE/SELECT . 4. Press VOL or VOL to select Edit MemoryXX . Then press MEM or REMOTE/ SELECT . Store Name is displayed. The cursor flashes indicating that the display is rea...

Memory Dial ing 20 O NE - TOUCH S PEED D IAL You can store your most frequently dialed number in the One-touch Speed Dial location. The One-touch Speed Dial allows you to dial a number with one key press. (There is no need to press TALK/ FLASH . The phone will automatically dial the number stored.) ...

C a ller ID 21 4. Press VOL to move the pointer to Yes . 5. Press REMOTE/SELECT or CH/DELETE . 6. You hear a confirmation tone. After about two seconds, the handset returns to standby mode. CALLER ID You must subscribe to Caller ID service to use this feature. When the telephone rings, the Caller ID...

C a ller ID 22 2. When you pick up the phone, the display changes to Talk . (Auto Talk feature is set to on.) V IEWING THE C ALLER ID M ESSAGE L IST The Caller ID list stores information for up to 30 incoming calls - even unanswered calls. Ô 1. Press CID/MENU . The summary screen appears. This scree...

C a ller ID 23 Deleting a Caller ID Message 1. Press CID/MENU . Display the message to be deleted from the Caller ID list by pressing VOL or VOL . 2. Press CH/DELETE . 3. Press VOL or VOL to select Yes or N o . Ô 4. Press REMOTE/SELECT or CH/DELETE . When the pointer is at Yes : You hear a confirmat...

C a ller ID 24 2. Press TALK/FLASH . The displayed phone number dials automatically. You can also place a call from Talk Mode. 1. Press TALK/FLASH . Then press CID/MENU . 2. Select the phone number that you want to dial by pressing the VOL or VOL . 3. Press REMOTE/SELECT. The displayed phone number ...

T he Integrated Answering D e vice 25 THE INTEGRATED ANSWERING DEVICE The phone has a built-in answering system that answers and records incoming calls. You can also use your answering system to record a conversation, leave a voice memo message, or to announce a special outgoing message to callers w...

T he Integrated Answering D e vice 26 T URNING THE A NSWERING S YSTEM O N /O FF 1. To turn the answering system on, press ANSWER . “Answering system is on” and the current greeting message will be played and you will hear a confirmation tone. The message counter displays the number of messages store...

T he Integrated Answering D e vice 27 - ( PLAY/STOP ) is pressed - Ten seconds elapse without a key press - An incoming call is received • If the system remains idle for about five seconds after the announcement, the system returns to standby. Once or /VOL/SEL is pressed, the idle time is extended t...

T he Integrated Answering D e vice 28 You hear a confirmation tone. Then the announcement “Time” and the day and time are announced for your review. After a few seconds, the system announces “To set security code, press menu again”. Setting a Personal Security Code (PIN) To play your messages from a...

T he Integrated Answering D e vice 29 1. Press MENU/CLOCK three times in standby mode. You hear “Ring time” and the current ring time ([ ] two, [ ] four, [ ] six, [ ] Toll saver), and it is displayed on the base. Then you hear the guidance for setting the ring time. 2. Press /VOL/SEL or /VOL/SEL unt...

T he Integrated Answering D e vice 30 Announce only feature The announce only feature plays a prerecorded outgoing message “Hello, no one is available to take your call. Please call again.”, and it will not allow the caller to leave a message. To set “Announce only”, follow the previous steps. The o...

T he Integrated Answering D e vice 31 Turning the Message Alert tone Off. • When all new messages are played back, the Message Alert tone will automatically deactivate. OR • If you want to silence the alert before you finish listening to all the new messages, press any key on the base unit and the t...

T he Integrated Answering D e vice 32 3. Press SET . A confirmation tone is heard along with the setting in the language selected. S ETTING Y OUR O UTGOING M ESSAGE (G REETING ) When you receive a call, the answering system automatically plays either a preset message or your own greeting. Preset mes...

T he Integrated Answering D e vice 34 U SING Y OUR A NSWERING S YSTEM The message counter displays the number of messages stored in memory. If the display flashes, there are new messages waiting for you. The flashing number represents the number of new messages, not total messages. This phone is des...

T he Integrated Answering D e vice 35 3. Press ( PLAY/STOP ) at any time to stop reviewing messages and return to standby. The message counter shows the number of messages stored in memory. To quickly scroll backwards through a message, press and hold . Skipping a message 1. Press ( PLAY/STOP ) to r...

T he Integrated Answering D e vice 37 A beep that can be heard by both parties sounds during recording. 2. To stop recording, press ( PLAY/STOP ) or MEMO REC . You hear a confirmation tone. R EMOTE O PERATION Remote access away from homeYou can operate your answering system from a remote location us...

T he Integrated Answering D e vice 39 Remote access with the handsetYou can operate your answering system from another room using a handset. Ô 1. With the phone in standby mode, press REMOTE/SELECT on the handset. Remote AnsweringMachine operation appears on the display. The answering system announc...

Additiona l Information 40 ADDITIONAL INFORMATION I NSTALLING THE O PTIONAL B ELTCLIP To attach the beltclipInsert the beltclip into the holes on each side of the handset. Press down until it clicks. To remove the beltclipPull both sides of the beltclip to release the tabs from the holes. H EADSET I...

Trouble s hoot ing 41 TROUBLESHOOTING If your phone is not performing to your expectations, please try these simple steps first. Problem Solution The CHARGE/IN USE LED won’t illuminate when the handset is placed on the base. Make sure the AC adapter is plugged into the base and wall outlet. Make sur...

Car e 43 CARE Keep the phone dry; if it gets wet, wipe it dry immediately. Use and store the phone only in normal temperature environments. Handle the phone carefully; do not drop it. Keep the phone away from dust and dirt, and wipe it with a damp cloth occasionally to keep it looking new. SERVICE A...

43-3857 UPZZ01042BZ 02A04 Printed in China RadioShack CorporationFort Worth, Texas 76102 Limited One-Year Warranty This product is warranted by RadioShack against manufacturing defects in material and workman-ship under normal use for one (1) year from the date of purchase from RadioShack company-ow...