RadioShack 43-3817 - Manuals

Installation 9 For direct wall mounting, align the base’s keyhole slots with the mounting screws and slide the base downward to secure it. 5. Plug the adapter into a standard AC outlet. 6. Lift the base’s antenna to a vertical position. % 100'%6+0) ." % *#4)+0) " #0& " 4 '2.#%+0) ...

Installati on 10 When you first use the phone after charging or recharging the battery pack, the phone might not work and you might hear error beeps. If this happens, return the handset to the base for about 5 seconds to reset the security access-protection code. Using a pencil eraser, clean the cha...

Installati on 12 5 '66+0) " 6*' " * #0&5'6 N 5 " 4 +0)'4 " 6 10' 1 8 1.7/' You can select one of the handset’s four different ringer tone/volume settings or turn the ringer off. At any time, except during a call, repeatedly press 8 8 8 8 or 9 to select the desired ringer setting....

Installati on 14 1. Lift the handset and hold down CID/MENU until the menu appears. 2. Press 3 or 9 9 9 9 twice to select ý7h[Wý9eZ[ ý7h[Wý9eZ[ ý7h[Wý9eZ[ ý7h[Wý9eZ[ . 3. Press SEL , then enter your three-digit area code. If you make a mistake, repeatedly press ∗∗∗∗ 6 6 6 6 /TONE or #### 7 to move t...

Te lephon e Op eration 15 6'.'2*10' " 12'4#6+10 / #-+0) " #0& " 4 '%'+8+0) " % #..5 1. To make a call, lift the handset and press TALK/ FLASH . JWba JWba JWba JWba and the current volume setting (see “Setting the Handset Volume” on Page 16) appear on the handset. If you set the r...

Te lephon e Op eration 17 7 5+0) " 6 10' " 5 '48+%'5 " 10 " # " 2 7.5' " . +0' Some special services, such as bank-by-phone, require tone signals. If you have pulse service, you can still use these special tone services. Dial the service’s main number. When the service answer...

T e lepho ne Operation 18 5VQTKPI " C " 0COG " CPF " 0WODGT " KP " /GOQT[ When you are storing a number in memory, an error tone sounds and the phone exits the storing process if you wait more than 30 seconds between each keypress. If you receive a call during memory entry, t...

Te lephon e Op eration 19 character. Hold down CH/DEL to delete all characters. 6. Press SEL . Ijeh[ýDkcX[hý Ijeh[ýDkcX[hý Ijeh[ýDkcX[hý Ijeh[ýDkcX[hý appears. 7. Enter the phone number and any tone or pause entries (see “Using Tone Services on a Pulse Line” on Page 17 and “Entering a Pause” on Page...

T e lepho ne Operation 20 cursor to O[i O[i O[i O[i , then press SEL or CH/DEL . The phone beeps, and C[ceho C[ceho C[ceho C[cehoýýýýdý:[b[j[Z dý:[b[j[Z dý:[b[j[Z dý:[b[j[Z appears. =eý8WYa =eý8WYa =eý8WYa =eý8WYa — Returns you to the list of memory numbers. 'PVGTKPI " C " 2CWUG Some telepho...

Te lephon e Op eration 21 &KCNKPI " C " /GOQT[ " 0WODGT 1. Lift the handset and press MEM to dial a stored memory number. The list of memory location numbers appears. 2. Choose a memory location ( 0 – 9 ) by pressing a number or by repeatedly pressing 8 8 8 8 or 9 , then press TALK/F...

Caller ID Operation 24 time you review the record). The second line shows the caller’s name, and the third line shows the caller’s phone number. To exit the Caller ID record display, press END . %CNNGT " +& " /GUUCIGU # &&+0) 1 & '.'6+0) " 6*' " # 4'# " % 1&' ...

Answering Syste m Operation 26 2. Press CH/DEL . :[b[j[ýC[iiW][5ý :[b[j[ýC[iiW][5ý :[b[j[ýC[iiW][5ý :[b[j[ýC[iiW][5ý appears. 3. Press 8 or 9 to move the cursor to O[i O[i O[i O[i , then press SEL or CH/DEL . The phone beeps to indicate the record was deleted. To delete all Caller ID records: 1. Pre...

Answering Syst em Ope ration 27 5 '66+0) " 6*' " & #; 1 6 +/' You must set the day and time so the system can record the correct day and time of each message. ±ý 1. Press MENU once. The system announces “Time,” then the currently set time, day, and the day’s number ( '''' for Sunday, (((...

Answering Syste m Operation 28 setting. The current setting — (((( , **** , ,,,, , or jI jI jI jI (toll saver) — displays. 2. Repeatedly press | 6 or 7 | until the desired number appears. 3. Press SET/RING to store the setting. The system beeps and announces “Ring Time” and the currently set ring ti...

Answering Syst em Ope ration 29 1. Press MENU five times. The system announces “Message Alert” followed by the current setting. The current setting — E< E< E< E< (Off) or Ed Ed Ed Ed — appears. 2. Press | 6 or 7 | to select Ed Ed Ed Ed or E< E< E< E< . 3. Press SET/RING to st...

Answering Syste m Operation 30 To switch between your outgoing message and the system’s prerecorded message, press OGM . The current message plays. While the message is playing, press OGM again. 4 '%14&+0) 1 & '.'6+0) " #0 " 1 76)1+0) " / '55#)' 1. Hold down OGM . The system anno...

Answering Syst em Ope ration 31 5 %4''0+0) " % #..5 You can let the system answer calls while you listen to the caller’s message through the speaker. Press TALK/FLASH to answer the call if the handset is off the base, or lift the handset if it is on the base. You can also pick up any phone on th...

Answering Syste m Operation 32 When you finish the memo, press MEMO or PLAY/ STOP . ±ý 4 '%14&+0) " # " % 108'45#6+10 The system lets you record both sides of a telephone conversation when you are talking with the handset. # To start recording a phone conversation, press MEMO on the base...

Answering Syst em Ope ration 33 second of playback and plays the previous second, until the beginning of the message. Release | 6 to resume normal playback. To replay the previous message, press | 6 within about 2 seconds (4 seconds during remote operation) after a message begins playing. If the cur...

Answering Syste m Operation 34 5GVVKPI " VJG " 5GEWTKV[ " %QFG The two-digit remote operation security code prevents unauthorized remote access to your messages. The code is preset to 80. To change the code to any number from 00 to 99: 1. Press MENU twice. The system announces “Security ...

Answering Syst em Ope ration 35 Remote operation stops when someone picks up the handset or any phone on the same phone line. 1. Dial your phone number and wait for the system to answer. If the system is not set to answer calls, it will answer after about ten rings and sound a series of beeps. 2. Wh...

36 T roubleshooting 4GOQVG " %QOOCPFU 6417$.'5*116+0) 2TGUU "%" VJGP 6Q 1 Repeat current message during playback. If you press #### 1 within about 4 seconds after a message begins (unless it is the first new message), the previous message replays. 2 Play messages. The remote playback of ...

Care 38 If you still have problems, disconnect the phone. If other phones on the same line work properly, the fault is in this phone or its installation. If you cannot find the problem, take your phone to your local RadioShack store for assistance. %#4' Keep the phone dry; if it gets wet, wipe it dr...

FC C Statement 39 and advises you of your right to file a complaint with the FCC. Also, the phone company can make changes to its lines, equipment, operations, or procedures that could affect the operation of this telephone. The telephone company notifies you of these changes in advance, so you can ...

43-3817 UCZZ01369ZZ 05A02 Printed in China RadioShack CorporationFort Worth, Texas 76102 Limited One-Year Warranty This product is warranted by RadioShack against manufacturing defects in material and workman-ship under normal use for one (1) year from the date of purchase from RadioShack company-ow...