RadioShack 43-3544 - Manuals

Impor tant Infor m atio n 6 12. This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your local power company. 13. Do not allow anything to rest on the power cord. Do not locate this p...

8 Intro duction electrical storm. There may be a remote risk of electric shock from lightning. 19. Do not use the telephone to report a gas leak if the phone is in the vicinity of the leak. +0641&7%6+10 Thank you for purchasing the RadioShack 900 MHz Cordless Telephone. Your phone uses advanced ...

9 In stallation +056#..#6+10 5 '.'%6+0) " # " . 1%#6+10 You can place the phone’s base on a desk or table, or mount it on a standard wall plate or directly on a wall. Select a location that is: • near an accessible AC outlet • near a telephone line jack • out of the way of normal activities ...

11 In stallation 2. Route the adapter and modular cords throughthe grooves on the back of the base as shown here. 3. Plug the short modular cord into the wall plate jack, then align the base’s keyhole slots with the wall plate studs and slide the base down to secure it. 4. Plug the adapter into a st...

12 Installation 2. Plug one end of the supplied long modular cord into the TEL LINE jack on the back of the base. 3. Insert the supplied AC adapter’s barrel plug into the DC IN 9V jack on the bottom of the phone’s base. 4. Route the adapter and modular cords through the grooves on the back of the ba...

13 In stallation when the handset is on the base, even if the battery pack is not connected. 1. Press down and slide off the battery compartment cover. 2. Lift the battery pack out of the compartment. 3. Plug the battery pack’s connector into the socket in the compartment (the connector fits only on...

15 In stallation • Using a pencil eraser, clean the charging contacts on the handset and base about once a month. • If you are not going to use your phone for an extended period, disconnect the battery pack. This increases the battery pack’s usable life. • The supplied battery pack should last for a...

18 Installation 1. Lift the handset and hold down CID/MENU until the menu appears with 7kje 7kje 7kje 7kje JWba JWba JWba JWba selected. 2. Press 3 or 9 9 9 9 to move the cursor to 7h[Wý9eZ[0 7h[Wý9eZ[0 7h[Wý9eZ[0 7h[Wý9eZ[0 . 3. Press SEL , then enter your three- digit area code. If you make a mist...

Operation 20 3. Press SEL to select ;d] ;d] ;d] ;d] (English) or <h$ <h$ <h$ <h$ (French). 4. Return the handset to the base or press END to store the new setting. 12'4#6+10 The handset window has plastic film on it to protect it during shipment. Carefully peel off the film before using ...

Operation 21 When you receive a call, ?dYec_d] ?dYec_d] ?dYec_d] ?dYec_d] 9Wbb 9Wbb 9Wbb 9Wbb appears. To answer the call, lift the handset and press TALK/FLASH . If Auto Talk is on, just lift the handset. If the handset is away from the base, press TALK/FLASH , any number, ∗ /TONE/ 6 6 6 6 , or # /...

Operation 23 7 5+0) " 6 10' " 5 '48+%'5 " 10 " # " 2 7.5' " . +0' Some special services require tone signals (such as bank-by-phone). If you have pulse dialing, you can still use these special tone services. Dial the service’s main number. When the service answers, press ∗ /T...

Operation 25 up to 20 digits, and each name can be up to 14 characters. 5VQTKPI " C " 0WODGT " CPF " 0COG " KP " /GOQT[ 1. Lift the handset. 2. Hold down MEM until C[ceho C[ceho C[ceho C[ceho Ijeh[ Ijeh[ Ijeh[ Ijeh[ and a list of memory location numbers appears. 3. Select an ...

Operation 27 DEL to delete a character. To delete all characters, hold down CH/DEL for at least 1 second. 6. Press SEL . Ijeh[ Ijeh[ Ijeh[ Ijeh[ DkcX[h DkcX[h DkcX[h DkcX[h appears. 7. Enter the number and any tone and pause entries (see “Using Tone Services on a Pulse Line” on Page 23 and “Entering...

Operation 29 =e =e =e =e 8WYa 8WYa 8WYa 8WYa — returns you to the list of memory numbers. 4GXKGYKPI " /GOQT[ " 0WODGTU To review your memory numbers, press MEM . The list of memory location numbers ( '''' – &&&& ) appears with the name stored with each number (or 2C[ceho 2C[c...

Operation 30 phone’s memory recall activates), then press the desired memory location number. %JCKP / &KCNKPI " 5GTXKEG " 0WODGTU For quick recall of numbers for special services (such as bank-by-phone), store each group of numbers in its own memory location. Dial the service’s main numb...

Operation 31 memory. Speed dial lets you dial a number by pressing a single button. ± 5VQTKPI " C " 0WODGT " KP " 5RGGF " &KCN 1. Lift the handset. 2. Hold down SPEED DIAL until Ijeh[ý Ijeh[ý Ijeh[ý Ijeh[ý DkcX[h DkcX[h DkcX[h DkcX[h appears. 3. Follow the steps under “Storin...

33 Caller ID Operation unavailable or if the name and number were blocked by the caller (see “Caller ID Messages” on Page 35). If you subscribe to Call Waiting with Caller ID, you hear a tone through the handset when a call comes in, then the Caller ID record appears. If the Caller ID memory becomes...

34 Caller ID Operation number of new Caller ID records, if any, and the total number of records appears. Repeatedly press 9 9 9 9 to scroll through the Caller ID records from the newest to the oldest, or 8 8 8 8 to scroll back through the records. To scroll quickly through the records, hold down 8 8...

38 Caller ID Operation &GNGVKPI " C " 5KPING " %CNNGT " +& " 4GEQTF 1. Press CID/MENU then 9 9 9 9 to recall the record you want to delete. 2. Press CH/DEL . :[b[j[ :[b[j[ :[b[j[ :[b[j[ C[iiW][5 C[iiW][5 C[iiW][5 C[iiW][5 appears, prompting you to confirm the deletion. 3....

39 T roubleshootin g 6417$.'5*116+0) We do not expect you to have any problems with your phone, but if you do, these suggestions might help. 2TQDNGO " 5WIIGUVKQPU The phone does not work properly. Be sure the base’s phone line cord and AC adapter are correctly and securely connected. Be sure the...

40 T roubleshooting Low volume or unusual sounds. Someone has picked up another phone on the same line. Hang up the other phone. Your conversa-tion is difficult to hear due to dropout or mut-ing. Keep the handset away from computers, remote control toys, wireless microphones, alarm sys-tems, interco...

41 T roubleshootin g The handset battery pack does not charge. Check the charging con-tacts on the handset and base. If they are dirty, clean them with a pencil eraser. Be sure the battery pack is connected correctly. Be sure the handset is properly seated on the base. Replace the battery pack. The ...

Car e 42 If you still have problems, disconnect the phone. If other phones on the same line work properly, the fault is in this phone or its installation. If you cannot find the problem, take the phone to your local RadioShack store for assistance. %#4' Keep the phone dry; if it gets wet, wipe it dr...

RadioShack CorporationFort Worth, Texas 76102 43-3535/43-3544/43-3545 UCZZ01368ZA 05A02 Printed in China Limited One-Year Warranty This product is warranted by RadioShack against manufacturing defects in mate-rial and workmanship under normal use for one (1) year from the date of purchasefrom RadioS...