RadioShack 43-1122 - Manuals

5 Contents ˆ Contents Important Information ........................................................................................................... 2 Features .................................................................................................................................. 6 Inst...

6 Features ˆ Features Thank you for purchasing the RadioShack 900 MHz Cordless Telephone. Your phone uses advanced technology to give you superior audio quality and extended range. The phone’s Caller ID unit records each caller’s telephone number (and name, if available in your area) and the date an...

7 Installation ˆ Installation SELECTING A LOCATION You can place the phone’s base on a desk or table, or mount it on a standard wall plate or directly on a wall. Select a location that is: • near an accessible AC outlet • near a telephone line jack • out of the way of normal activities • away from e...

8 Installation 3. Route the adapter and modular cords through the grooves on the bottom of the base. 4. Plug the short modular cord into the wall plate jack, then align the base’s keyhole slots with the wall plate studs and slide the base down to secure it. 5. Plug the adapter into a standard AC out...

11 Operation such an area, do not store the area code.Follow these steps to store your area code. 1. Lift the handset and hold down CALL ID until the menu appears with 7kje 7kje 7kje 7kje JWba JWba JWba JWba selected. 2. Press 3 or 9 9 9 9 to move the cursor to 7h[Wý 7h[Wý 7h[Wý 7h[Wý 9eZ[0 9eZ[0 9e...

12 Operation ADJUSTING THE HANDSET’S VOLUME To adjust the volume of the sound you hear through the handset during a call, press 8 8 8 8 or 9 9 9 9 on the handset until you obtain the desired volume level. Lebkc[ Lebkc[ Lebkc[ Lebkc[ CWn_ckc CWn_ckc CWn_ckc CWn_ckc , Lebkc[ Lebkc[ Lebkc[ Lebkc[ >_...

13 Operation Notes: • Connecting a headset disconnects the handset’s earpiece and microphone. • 8 8 8 8 or 9 9 9 9 on the handset also controls the headset’s volume. • If you place the handset on the base to recharge it while the headset is connected, be sure the handset seats properly. • With a hea...

14 Operation 7. Enter the number and any tone and pause entries (see “Using Tone Services on a Pulse Line” on Page 12 and “Entering a Pause”). Note: Each tone or pause entry uses one digit of memory. 8. Press SELECT . The phone beeps and C[ceho C[ceho C[ceho C[ceho dddd Ijeh[Z Ijeh[Z Ijeh[Z Ijeh[Z a...

15 Caller ID Operation activates), then press the desired memory location number. Chain-Dialing Service Numbers For quick recall of numbers for special services (such as bank-by-phone), store each group of numbers in its own memory location. Dial the service’s main number first. Then, at the appropr...

16 Caller ID Operation name (if available), and the third line shows the caller’s phone number. Caller ID Messages ADDING/DELETING THE AREA CODE The display shows the area code of an incoming call, unless the call comes from the area code you stored (see “Storing Your Area Code” on Page 10). You can...

17 Caller ID Operation 3. Choose a memory location ( 1 – 0 ) by pressing a number or by repeatedly pressing 8 8 8 8 or 9 9 9 9 , then press SELECT . If the selected location is empty, the phone beeps to confirm that it stored the number, then the Caller ID record appears. If a record exists in the s...

18 Troubleshooting ˆ Troubleshooting We do not expect you to have any problems with your phone, but if you do, these suggestions might help. Problem Suggestions The phone does not work or works poorly. Be sure the base’s phone line cord and AC adapter are correctly and securely connected. Be sure th...

19 Troubleshooting If you still have problems, disconnect the phone. If other phones on the same line work properly, the fault is in this phone or its installation. If you cannot find the problem, take the phone to your local RadioShack store for assistance. CARE Keep the phone dry; if it gets wet, ...