Page 2 - contents; CAUTION; getting to know your equalizer
2 The Basics 3 The Basics contents getting to know your equalizer 3 features 4 back of equalizer ...................................................... 6front of equalizer ..................................................... 8 important safety instructions (UL 6500) 9before you begin 13 connecting ...
Page 3 - features
4 The Basics 5 The Basics POWER On/Off Rocker Switch Left Equalizer Controls Left Equalizer IN/OUT Switch Left Output Level Control Left LOW CUT Switch Left +6/+3/0/-10 LED Output Level Indicators Right Equalizer IN/OUT Switch Right Output Level Control Right LOW CUT Switch Right +6/+3/0/-10 LED Out...
Page 4 - back of equalizer
6 The Basics 7 The Basics Stereo Phono Audio Input Jacks Connect audio input source (CD or DVD player, TV, video camera, etc.) here via an unbalanced audio cable. Match left (white) and right (red) jacks with white and red connections on the audio cable. REC Output Jacks Connect to your recorder’s i...
Page 5 - front of equalizer
8 The Basics 9 The Basics important safety instructions (UL 6500) 1. Read all safety and operating instructions before the appliance is operated. 2. Keep all safety and operating instructions for future reference. 3. Follow all warnings on the appliance and in the operating instructions. 4. Unplug t...
Page 7 - before you begin
12 The Basics 13 The Basics 22. For added protection for this product during a lightning storm, unplug it from the wall outlet. This will prevent damage to the product due to lightning and power line surges. 23. Only use attachments recommended by the product manufacturer. 24. The product should be ...
Page 8 - connecting your equalizer; connecting input sources; connecting REC output; using the ground lift switch
14 The Basics 15 The Basics connecting your equalizer connecting input sources Connect line level inputs (i.e.: tuners, CD players, etc.) to the INPUT jacks on the back of your equalizer through either stereo phono audio cables or ¼" (6.35 mm) audio cables. Use only one type of cable at a time. ...
Page 9 - using your equalizer; replacing the fuse
16 The Basics 17 The Basics using your equalizer 1. Set the volume on the output devices (receiver, amplifi er, or tape deck) to minimum and turn them on. 2. Turn on the equalizer. The red power LED indicator lights up. 3. Set the IN/OUT switch to IN to activate the equalizer. The red LED indicator l...
Page 10 - caring for your equalizer; product specifi cations
18 The Basics 19 The Basics caring for your equalizer • Keep the equalizer dry. If it goes wet, wipe it dry immediately. • Use and store the equalizer only in normal temperature environments. • Handle the equalizer gently and carefully. Do not drop it. • Keep the equalizer away from dust and dirt. •...