RadioShack 04A01 - Manual
RadioShack 04A01 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – COUNTING UP; Note: If either timer does not show; COUNTING DOWN; Note: When you hold down
- Page 3 – TIMES UP; CLOCK; Using the Stand; CARE
- Page 4 – Limited One-Year Warranty; We Service What We Sell
OWNER’S MANUAL — Please read before using this equipment.
©
2001 RadioShack Corporation. All Rights Reserved.
RadioShack and RadioShack.com are trademarks
used by RadioShack Corporation.
LCD Jumbo Display Dual Timer/Clock
Your RadioShack LCD Jumbo Display Dual
Timer/Clock is a precise, dual-purpose time-
piece. Both timers can count hours, minutes
and seconds, up or down, from a specified
time. The metal stand lets you set the timer/
clock on a desk or table, and the clip and
magnet let you attach it almost anywhere.
Countup Timer — counts up to 29 hours, 59
minutes and 59 seconds.
Countdown Timer — counts down from 29
hours, 59 minutes and 59 seconds.
Minute and Second Increments — let you
count even small amounts of time.
Alarm — alerts you when the countdown
time elapses.
INSTALLING THE BATTERY
Your must install the supplied LR44 button-
cell battery before using your timer/clock.
1. Insert a coin
into the groove
on the battery
compartment
cover, turn the
coin counter-
clockwise, and
remove the
cover.
2. Insert the battery with the positive (
+
)
side facing up. The timer/clock beeps.
3. Replace the cover.
Cautions:
• Keep button-cell batteries away from
children. Swallowing a button-cell
battery can be fatal.
• Dispose of old batteries promptly and
properly. Do not burn or bury them.
Notes:
• If the timer/clock does not work when
you install the battery, remove and re-
install it.
• When the display dims or the alarm
weakens, replace the battery. For the
best performance and longest life, we
recommend using a RadioShack
alkaline battery.
SETTING THE CLOCK
1. Repeatedly press
MODE
until
CLOCK
appears in the upper left corner.
2. Hold down
CLEAR
for about 2 seconds
until the display flashes.
Note: Repeatedly press
CLEAR
to
change between a 12- and 24-hour for-
HOUR
MINUTE
SECOND
CLEAR
MODE
TIMER 2
TIMER 1
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 mat. PM appears for PM hours when the 12-hour format is selected. 3. Repeatedly press (or hold down) HOUR until the correct hour appears. 4. Repeatedly press (or hold down) MINUTE until the correct minute appears. 5. Repeatedly press (or hold down) SEC- OND until the correct second appears. Note: ...
3 • To stop the countdown before the timer reaches 0:00 00 , press TIMER 1 or TIMER 2 , then press CLEAR . The timer resets to 0:00 00 . When the timer reaches 0:00 00 , the alarm sounds for 1 minute and TIMES UP flashes above the active timer. Then, the timer countsup in 1-second increments. Press ...
63-898A 04A01 Printed in Hong Kong RadioShack CorporationFort Worth, Texas 76102 Limited One-Year Warranty This product is warranted by RadioShack against manufacturing defects in material and workman-ship under normal use for one (1) year from the date of purchase from RadioShack company-ownedstore...
