QLogic ISR6200 - Manuals - manualsarea.com

Page 2 - Configuration; Performing Remote Migration

4 – Configuration SN0051424-00 B 2  Use Case 2: The source and destination arrays are at the local site initially. For Use Case 2, after the initial copying operation, the remote migration is moved to the remote site. The iSR6200 supports a maximum of eight paths per array. When using the topology ...

Page 4 - Discovering Remote Devices Through FCIP; TP Setting

5 – Best Practices SN0051424-00 B 4 13.After successfully logging in, you see the LUNs on the logged-in target as follows:  For Use Case 1, a new array object is formed. Issue the set array command to set the array type and license the array if required.  For Use Case 2, the discovered iSCSI targe...

Page 5 - oft

5 – Best Practices SN0051424-00 B 5  Refer to the attached Timeline for Remote Migration Project.xlsx spreadsheet to estimate the amount of data that can be transferred weekly based on the available bandwidth and change rate at the source. Remote migration projects depend on the available bandwidth...

Page 6 - Remote Migration Topology Examples

6 – Remote Migration Topology Examples SN0051424-00 B 6 Figure 5-1. Example Time Line for Remote Migration Project 6 Remote Migration Topology Examples The following sections illustrate various remote migration topologies:  6.1 Fibre Channel-to-Fibre Channel Remote Online and Offline Migration Usin...

Page 7 - Using iSCSI Presented Targets

6 – Remote Migration Topology Examples SN0051424-00 B 7 6.1 Fibre Channel-to-Fibre Channel Remote Online and Offline Migration Using iSCSI Presented Targets The Fibre Channel-to-Fibre Channel topology shown in Figure 6-1 supports both online and offline remote migration. For offline migration, the s...

Page 8 - Using FCIP

6 – Remote Migration Topology Examples SN0051424-00 B 8 6.2 Fibre Channel-to-Fibre Channel Remote Online and Offline Migration Using FCIP The Fibre Channel-to-Fibre Channel topology shown in Figure 6-2 supports both online and offline remote migration. For offline migration, the servers accessing th...

Page 9 - Fibre Channel-to-iSCSI Remote Online and Offline Migration

6 – Remote Migration Topology Examples SN0051424-00 B 9 6.3 Fibre Channel-to-iSCSI Remote Online and Offline Migration The Fibre Channel-to-iSCSI topology shown in Figure 6-3 supports both online and offline remote migration. For offline migration, the servers accessing the source LUN must be shut d...

Page 10 - iSCSI-to-Fibre Channel Remote Offline Migration

6 – Remote Migration Topology Examples SN0051424-00 B 10 6.4 iSCSI-to-Fibre Channel Remote Offline Migration The iSCSI-to-Fibre Channel topology shown in Figure 6-4 supports only offline migration. The iSR6200 does not currently support online data migration when the source LUN is from an iSCSI targ...

Page 11 - Document Revision History; Changes