QLogic 8200 - Manuals

vi SN0054667-00 C User’s Guide—QConvergeConsole CLI2400, 2500, 3200, 8100, 8200 Series -vlaninfo (Display VLAN Information). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-23 -vlanlist (Display VLAN List) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-...

viii SN0054667-00 C User’s Guide—QConvergeConsole CLI2400, 2500, 3200, 8100, 8200 Series -tb (Target Beacon On/Off) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-34 -tp (Display Host Topology) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-35 -u (Firm...

xii SN0054667-00 C User’s Guide—QConvergeConsole CLI2400, 2500, 3200, 8100, 8200 Series 7 NIC Partitioning (NPAR) Noninteractive Commands Command Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-1 Command Summary . . . . . . . . . . . . . . . . . . . ....

SN0054667-00 C xiii User’s Guide—QConvergeConsole CLI 2400, 2500, 3200, 8100, 8200 Series CNA VPD Information (-i) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-5 Adapter Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-6 Adapt...

SN0054667-00 C xv User’s Guide—QConvergeConsole CLI 2400, 2500, 3200, 8100, 8200 Series Display FC Port Link Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-42 Display Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-43 Reset Parameters. . ....

SN0054667-00 C xvii User’s Guide—QConvergeConsole CLI 2400, 2500, 3200, 8100, 8200 Series Beacon/LED Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-120 Transceiver Diagnostics Monitoring Interface (DMI) . . . . . . . . . . . . . . 10-121 General . . . . . ....

xviii SN0054667-00 C User’s Guide—QConvergeConsole CLI2400, 2500, 3200, 8100, 8200 Series A NIC Partitioning (NPAR) Overview What is NPAR?. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-2 QLogic Adapters that Support NPAR . . . . . . . . . . . . . . . ...

SN0054667-00 C xxi Preface This guide describes QConvergeConsole ® CLI, which is used to configure and manage QLogic Fibre Channel adapters, Intelligent Ethernet adapters, and Converged Network Adapters within SANs. What’s in this Guide This guide contains the basic information you need to get start...

PrefaceWhat’s in the Help System xxii SN0054667-00 C  Chapter 10 Converged Network Adapter Interactive Commands contains a description of the QConvergeConsole CLI Converged Network Adapter interactive mode menus for the NIC, iSCSI, and Fibre Channel functions.  Chapter 11 NIC Partitioning (NPAR) I...

Preface License Agreements SN0054667-00 C xxiii  Text in blue font indicates a hyperlink (jump) to a figure, table, or section in this guide, and links to Web sites are shown in underlined blue . For example:  Table 9-2 lists problems related to the user interface and remote agent.  See “Installa...

PrefaceTechnical Support xxiv SN0054667-00 C Technical Support Customers should contact their authorized maintenance provider for technical support of their QLogic switch products. QLogic-direct customers may contact QLogic Technical Support; others will be redirected to their authorized maintenance...

SN0054667-00 C 1-1 1 System Requirements QConvergeConsole CLI is an management utility that centralizes management and configuration of QLogic adapters within the entire network (LAN and SAN). For optimum performance, QConvergeConsole CLI requires the hardware, software, and operating systems listed...

SN0054667-00 C 2-1 2 Installing and Uninstalling QConvergeConsole CLI This chapter describes how to download, install, and uninstall QConvergeConsole CLI.  Downloading QConvergeConsole CLI  “Installing QConvergeConsole CLI” on page 2-2  “Uninstalling QConvergeConsole CLI” on page 2-4 Downloading ...

2–Installing and Uninstalling QConvergeConsole CLIInstalling QConvergeConsole CLI 2-2 SN0054667-00 C f. Click Search . 5. Scroll through the list that appears and select the QConvergeConsole version for your operating system. 6. Click Download Now . 7. On the File Download dialog box, click Save . 8...

2–Installing and Uninstalling QConvergeConsole CLI Installing QConvergeConsole CLI in a Windows Environment SN0054667-00 C 2-3 Standard Windows Interactive (CLI) Installation To begin a standard installation of QConvergeConsole CLI on a Microsoft Windows operating system, at a command line, issue on...

2–Installing and Uninstalling QConvergeConsole CLIInstalling QConvergeConsole CLI in a Linux Environment 2-4 SN0054667-00 C Installing QConvergeConsole CLI in a Linux Environment To install QConvergeConsole CLI on a Linux platform, issue the following from the command form: rpm -ivh QConvergeConsole...

2–Installing and Uninstalling QConvergeConsole CLI Uninstalling QConvergeConsole CLI in a Linux Environment SN0054667-00 C 2-5 3. Select QConvergeConsole CLI . 4. Click Change/Remove . Command Line Uninstall You can uninstall QConvergeConsole CLI from the command line. Select interactive, passive, o...

SN0054667-00 C 3-1 3 Getting Started The QConvergeConsole CLI manages iSCSI, Ethernet, and Fibre Channel functions on QLogic Fibre Channel adapters, Intelligent Ethernet Adapters, and Converged Network Adapters. This chapter describes how to start the QConvergeConsole CLI using the noninteractive mo...

3–Getting StartedUsing Interactive Mode 3-2 SN0054667-00 C Using Interactive Mode Interactive mode is a menu-driven interface that manages QLogic Ethernet adapters, QLogic Fibre Channel Adapters, and all functions of QLogic Converged Network Adapters, including NIC, Fibre Channel, and iSCSI. Althoug...

3–Getting Started Main Menu SN0054667-00 C 3-3 Main Menu When you start QConvergeConsole CLI in interactive mode, the Main Menu appears as follows: Main Menu 1: Adapter Information 2: Adapter Configuration 3: Adapter Updates 4: Adapter Diagnostics 5: Adapter Statistics 6: Refresh 7: Help 8: Exit Ple...

3–Getting StartedGetting Help 3-4 SN0054667-00 C Getting Help Help is available in interactive mode using option 7. Help . Noninteractive mode provides help using the -h switch. For example, to list all of the available command line parameters, issue the following command: qaucli -h To list availabl...

SN0054667-00 C 4-1 4 NIC Noninteractive Commands This chapter describes the noninteractive NIC command format and parameters of QConvergeConsole CLI. Command Format Noninteractive mode format includes the following command: qaucli -pr nic [ optional parameters ] < command option > [ positional...

4–NIC Noninteractive Commands Command Summary SN0054667-00 C 4-3 Command Summary This section lists and describes each command line option in alphabetic order, followed by a command description. -beacon (Enable/Disable Port Beacon) To toggle on and off the port beacon (LED), issue the -beacon comman...

4–NIC Noninteractive Commands-icna (CNA Information) 4-8 SN0054667-00 C For example: > qaucli -pr nic -i 1 1. CNA: 1 CNA Port: 1 CNA Model: QLE8142 PortID: 0 Mac Phys. Address: 00:c0:dd:12:0f:f4 Loc. Mac: 00:c0:dd:12:0f:f4 CNA Serial Number: AFC0916A07152 MPI FW Version: 1.35.00 Adapter Alias: No...

4–NIC Noninteractive Commands -idcbx (Display Port DCBX Information) SN0054667-00 C 4-9 -idcbx (Display Port DCBX Information) To display port DCBX information, issue the -idcbx command as follows: > qaucli -pr nic -idcbx [ cna_port_inst ] -intloopback (Configure Test Parameters) To configure loo...

4–NIC Noninteractive Commands -minidump (Firmware Mini Dump) SN0054667-00 C 4-11 -minidump (Firmware Mini Dump) To dump a firmware core dump into a file for a given cna_port_inst , issue the -minidump command as follows: > qaucli -pr nic -minidump < cna_port_inst > < minidump_file > [...

4–NIC Noninteractive Commands-pinfo (Port Information) 4-12 SN0054667-00 C -pinfo (Port Information) To view port information, issue the -pinfo command as follows: > qaucli -pr nic -pinfo [ cna_port_inst ] For example: > qaucli -pr nic -pinfo === Port Information for 1. CNA Port Index === Host...

4–NIC Noninteractive Commands -ping (Ping Target) SN0054667-00 C 4-13 -ping (Ping Target) To run a ping diagnostic, issue the -ping command as follows: > qaucli -pr nic -ping < cna_port_inst > < hostname_or_IPv4 > [< count > < packet size > < timeout_ms > < TTL &g...

4–NIC Noninteractive Commands-sreset (Reset Ethernet Statistics Counters) 4-14 SN0054667-00 C -sreset (Reset Ethernet Statistics Counters) To reset the Ethernet statistics counters, issue the -sreset command as follows: > qaucli -pr nic -sreset [ cna_port_inst ] For example: > qaucli -pr nic -...

4–NIC Noninteractive Commands-sunreset (Undo Reset Ethernet Statistics Counters) 4-16 SN0054667-00 C -sunreset (Undo Reset Ethernet Statistics Counters) To undo the resetting of Ethernet statistics counters, issue the -sunreset command as follows: > qaucli -pr nic -sunreset [ cna_port_inst ] For ...

4–NIC Noninteractive Commands-teamnew_portspreview 4-18 SN0054667-00 C For example: > qaucli -pr nic -teamnew 1 ALL User selected CNA Port Indices: ALL Attempting to create new team: Team Description:Team Type: Fail OverSelected ports : 1, 2 CNA: 1 CNA Port: 1 MAC: 00:c0:dd:0a:b1:a8 Description: ...

4–NIC Noninteractive Commands -vlaninfo (Display VLAN Information) SN0054667-00 C 4-23 For example: > qaucli -pr nic -vlandel_preview VLAN List:ListIndex: 1 CNA: 1 CNA Port: 1 VLAN ID: 453 MAC: 00:c0:dd:12:0f:f4 Description: QLogic 10Gb PCI Ethernet Adapter -vlaninfo (Display VLAN Information) To...

4–NIC Noninteractive Commands -vtrestore (Restore VLAN & Teaming Configuration) SN0054667-00 C 4-25 pDNSServers[ 1] : fec0:0:0:ffff::2pDNSServers[ 2] : fec0:0:0:ffff::3............................VLAN ID : 777............................IPv4Address : 169.254.202.39IPv4SubnetMask : 0.0.0.0IPv4Gat...

SN0054667-00 C 5-1 5 Fibre Channel Noninteractive Commands This chapter describes the noninteractive Fibre Channel command format and parameters of QConvergeConsole CLI. For a quick reference to informative commands, see Display System Information (Command Line Options -g, -z, and -tp) . Display Sys...

5–Fibre Channel Noninteractive CommandsHost Configuration (Command Line Option -z) 5-2 SN0054667-00 C  List of adapters: adapter model, port number, WWPN, serial number (SN), adapter number (adapter 0–n), and status (online or offline)  Total number of QLogic Fibre Channel adapters detected Host C...

5–Fibre Channel Noninteractive Commands Host Configuration SN0054667-00 C 5-3 Host Configuration Use these options to show the information for one or all of the adapter ports in the system. The -z option shows the combination of the commands listed in Table 5-1 . The commands are listed in alphabeti...

5–Fibre Channel Noninteractive CommandsCommand Format 5-4 SN0054667-00 C You can combine the commands -o , -s and -x with other options. However, they must be at the beginning or at the end of the command line. Use these commands as follows:  -o = Output the results to a file (see “-o (Output to a ...

5–Fibre Channel Noninteractive Commands -c (Show Parameter Settings) SN0054667-00 C 5-7 -c (Show Parameter Settings) Use the -c command to show the parameter settings for all adapters in the system: # qaucli -pr fc -c [ <all> ] To show the parameter settings for a specific adapter, issue the f...

5–Fibre Channel Noninteractive Commands-dm (Display Diagnostics Monitoring Info) 5-8 SN0054667-00 C To view DCBX Type-Length-Value (TLV) data sent and received over the adapter port connection, issue the following command: qaucli -pr fc -cna < hba instance >|< hba wwpn > --tlv ( --detail...

5–Fibre Channel Noninteractive Commands -e (Boot Device View | Select | Disable) SN0054667-00 C 5-9 To show transceiver monitoring detailed information, issue the following command: # qaucli -pr fc -dm (< hba instance > | < hba wwpn > | all) details | det Where: -e (Boot Device View | Se...

5–Fibre Channel Noninteractive Commands-e (Boot Device View | Select | Disable) 5-10 SN0054667-00 C If the system does not have an adapter with a boot device selected, the following message appears: There is no boot device selected for any HBA in the system. Following is an example of the boot devic...

5–Fibre Channel Noninteractive Commands -ei (List Fibre Channel Error Codes) SN0054667-00 C 5-11 For all operating systems, if the adapter already has boot devices selected and they are the same as the ones in the command parameter or menu selection, the following message appears: The HBA already ha...

5–Fibre Channel Noninteractive Commands -gs (Show HBA Statistics) SN0054667-00 C 5-13 The following restrictions apply:  Under Linux, this feature is disabled if you are using the IOCTL or sysfs (inbox) driver.  Under Mac OS ® , the BindWWPN and BindPortID parameters are not changeable; Mac OS sup...

5–Fibre Channel Noninteractive Commands-h (Help) 5-14 SN0054667-00 C Under Linux, this feature is disabled if you are using the IOCTL or sysfs (inbox) driver. -h (Help) To view the help file, issue the following command: # qaucli -pr fc (-h) To view help information for an individual command, issue ...

5–Fibre Channel Noninteractive Commands -ha (Set | Delete HBA Alias) SN0054667-00 C 5-15 For example, typing qaucli -pr fc -l -h shows the following: Using config file: G:\Program Files\QLogic Corporation\QConvergeConsoleCLI\qaucli.cfgInstallation directory: G:\Program Files\QLogic Corporation\QConv...

5–Fibre Channel Noninteractive Commands-kr (Run Read/Write Buffer Test) 5-18 SN0054667-00 C -kr (Run Read/Write Buffer Test) Use the -kr command to do a read/write buffer test. To do a read/write test using the default parameters, issue the following command: # qaucli -pr fc -kr (< hba instance &...

5–Fibre Channel Noninteractive Commands -kr (Run Read/Write Buffer Test) SN0054667-00 C 5-19 To do a read/write buffer test using the current parameters, issue the following command: # qaucli -pr fc -kr (< hba instance > | < hba wwpn >) To exclude a device or devices on the selected adap...

5–Fibre Channel Noninteractive Commands-kr (Run Read/Write Buffer Test) 5-20 SN0054667-00 C Run Adapter Diagnostics Read-write Buffer Test The {(-ex | exclude) < target wwpn >} parameters specify a device that will be excluded from the read/write buffer test. The system shows the following inf...

5–Fibre Channel Noninteractive Commands -m (View, Enable, or Disable LUNs) SN0054667-00 C 5-25 To view the current select state of a specific LUN, issue the following command: # qaucli -pr fc -m (< hba instance > | < hba wwpn >) (< target wwnn > < target wwpn > < lun id &g...

5–Fibre Channel Noninteractive Commands-o (Output to a File) 5-28 SN0054667-00 C -o (Output to a File) To output result and status messages into a file, type -o , followed by the file name. For example, to save LUN information to a file named systemLUNinfo : # qaucli -pr fc -l -o systemLUNinfo Where...

5–Fibre Channel Noninteractive Commands-r (Update HBA Parameters) 5-32 SN0054667-00 C To set the link speed of selected target(s) attached to one adapter to the designated speed, issue the following command: # qaucli -pr fc -q (< hba instance > | < hba wwpn > | <all>) < target w...

5–Fibre Channel Noninteractive Commands -s (Silent Mode) SN0054667-00 C 5-33 -s (Silent Mode) In noninteractive mode, the system shows result and status messages generated by QConvergeConsole CLI (by default) unless suppressed by silent mode. You can combine this option with the -o option (see “-o (...

5–Fibre Channel Noninteractive Commands-tb (Target Beacon On/Off) 5-34 SN0054667-00 C To show specific target information for a specific target on an adapter, issue the following command: # qaucli -pr fc -t (< hba instance > | < hba wwpn >) (< target wwpn > | < target port id &g...

5–Fibre Channel Noninteractive Commands -tp (Display Host Topology) SN0054667-00 C 5-35 -tp (Display Host Topology) Use the -tp option to show the topology configuration of the host: # qaucli -pr fc -tp | topology Under Linux, this feature is disabled if you are using the IOCTL or sysfs (inbox) driv...

5–Fibre Channel Noninteractive Commands-vp (Virtual Port) 5-36 SN0054667-00 C The system shows the following information: QConvergeConsole CLIv1. x . x Build x Copyright 2003-2009 QLogic Corp.All rights reserved.Command Line QLogic FC Host Bus Adapters.Build Type: ReleaseBuild Date: xx / xx / xxxx x...

5–Fibre Channel Noninteractive Commands -x (Output in XML Format 1) SN0054667-00 C 5-37 -x (Output in XML Format 1) You can use this option with all noninteractive mode options that have a corresponding interactive mode option (see Table 5-1 ). This option must be the first or last command in the co...

SN0054667-00 C 6-1 6 iSCSI Noninteractive Commands This chapter describes the noninteractive iSCSI command format and parameters of QConvergeConsole CLI for the QLogic 8242 Converged Network Adapter. Command Format The noninteractive iSCSI command format is as follows: qaucli -pr iscsi [ optional pa...

6–iSCSI Noninteractive Commands -addchap (Add a CHAP Entry) SN0054667-00 C 6-3 -addchap (Add a CHAP Entry) To add a CHAP entry to the persistent CHAP table, issue the -addchap command as follows: -addchap [-BIDI] < hba_port_inst > < CHAP Name > < CHAP Secret > The optional paramete...

6–iSCSI Noninteractive Commands -ch (HBA Information) SN0054667-00 C 6-5 -ch (HBA Information) To display the adapter’s configured settings, issue the -ch command as follows: -ch [ hba_port_inst ] When you specify a port instance, information for only that adapter is shown. When you do not specify a...

6–iSCSI Noninteractive Commands-dc (Display Destination Cache [IPv6 only]) 6-6 SN0054667-00 C -dc (Display Destination Cache [IPv6 only]) The IPv6 destination cache contains the IP address, next-hop IP address, and path MTU information about both local and remote destinations. For multicast and on-l...

6–iSCSI Noninteractive Commands -dtrem (Remove Discovered Target) SN0054667-00 C 6-9 -dtrem (Remove Discovered Target) To remove a nonpersistent discovered target, issue the -dtrem command as follows: -dtrem < hba_port_inst > < target_instance > To obtain the target instance, use the com...

6–iSCSI Noninteractive Commands-ei 6-10 SN0054667-00 C Issuing this command resets the adapter. -ei To get information about errors and exit codes for noninteractive mode, issue the -ei command as follows (no parameters are required): -ei -f (Update Firmware Image—Specific HBA) The firmware runs the...

6–iSCSI Noninteractive Commands -gcr (Retrieve FW Crash Record) SN0054667-00 C 6-11 -gcr (Retrieve FW Crash Record) To get crash record information for the specified adapter port, issue the -gcr command as follows: -gcr < hba_port_inst> < Crash Output File > -h (Help) To view the QConver...

6–iSCSI Noninteractive Commands-import (Import HBA Configuration) 6-12 SN0054667-00 C Figure 6-1. Adapter Port Information The following shows an example of the adapter port information: 0. HBA 0 Port: 0 HBA Port Instance: 0 HBA Model: QLA4050CHBA Serial Number: FS20525B03135FW Version: 2.2.4.45 Typ...

6–iSCSI Noninteractive Commands-isns (Configure iSNS Settings) 6-14 SN0054667-00 C -isns (Configure iSNS Settings) To configure the iSNS settings for QLA4010 and QLA405 x , issue the -isns command as follows: -isns < hba_port_inst > [ iSNS IP Address ] [iSNSPORT < port_number >] If you d...

6–iSCSI Noninteractive Commands -lcd (Display Configured Link Configuration) SN0054667-00 C 6-15 -lcd (Display Configured Link Configuration) To display the configured link settings, issue the -lcd command. Note that because a system reset is required for changes in link configuration to take effect...

6–iSCSI Noninteractive Commands-n (Configure iSCSI Settings) 6-16 SN0054667-00 C You can repeat the < Config Name | Config Alias > < Value > parameter set for as many parameters as you want to configure. Table 6-3 lists these parameters and their ranges of values. Table 6-3. Adapter Para...

6–iSCSI Noninteractive Commands -nc (Display Neighbor Cache) SN0054667-00 C 6-17 -nc (Display Neighbor Cache) To display the neighbor cache (IPv6 only), issue the -nc command as follows: -nc < hba_port_inst > -netconf (Configure IPv6 Settings) To configure the network settings, issue the -netc...

6–iSCSI Noninteractive Commands -nh (Configure iSCSI Settings) SN0054667-00 C 6-19 To set everything automatically, issue the following commmand: -netconf6 0 -IPLLA -IPR01A -IPRRA To disable the IPv4 network, issue the following command: -netconf6 0 -DISN4 To disable the IPv4 and IPv6 networks, issu...

6–iSCSI Noninteractive Commands-pdt 6-20 SN0054667-00 C This command is not active for the PPC. For information on secondary boot code, see “-sbootcode (Set Secondary Boot Target Information)” on page 6-24 . -pdt To disable a target, issue the -pdt command as follows: -pdt < hba_port_inst > &l...

6–iSCSI Noninteractive Commands -ps SN0054667-00 C 6-21 -ps To view persistent targets for the adapter port, issue the -ps command as follows: -ps < hba_port_inst> [ Target ID ] If you do not specify the [ Target ID ] , QConvergeConsole CLI lists all targets for the specified adapter port numb...

6–iSCSI Noninteractive Commands-rdf 6-22 SN0054667-00 C -rdf To restore the specified adapter port’s firmware values to the factory default values, issue the -rdf command: -rdf < hba_port_inst> Issuing this command resets the adapter. -rdh (Port Restore Factory Defaults) Type the following com...

6–iSCSI Noninteractive Commands -rwt (Perform Read/Write Buffer Test) SN0054667-00 C 6-23 -rwt (Perform Read/Write Buffer Test ) The read/write buffer test writes an 8- or 16-byte pattern to the disk’s buffer and reads the written buffer back. It is nondestructive to disk data. To do a read/write bu...

6–iSCSI Noninteractive Commands-sbootcode (Set Secondary Boot Target Information) 6-24 SN0054667-00 C -sbootcode (Set Secondary Boot Target Information) To set the secondary boot target and LUN, issue the -sbootcode command as follows: -sbootcode < hba_port_inst> < Boot Target > < Boo...

6–iSCSI Noninteractive Commands -tp SN0054667-00 C 6-27 -tp To see information stored in Flash memory about persistent targets, issue the -tp command. If you enter only the adapter port instance number, QConvergeConsole CLI returns information for all targets of that adapter port instance. If you en...

SN0054667-00 C 7-1 7 NIC Partitioning (NPAR) Noninteractive Commands This chapter describes the noninteractive NIC partitioning (NPAR) command format and parameters of QConvergeConsole CLI. For an overview of NPAR, refer to Appendix A . NPAR is supported by the 3200 Series Intelligent Ethernet Adapt...

7–NIC Partitioning (NPAR) Noninteractive CommandsCommand Summary 7-2 SN0054667-00 C Command Summary This section lists and describes each NPAR command in alphabetic order, followed by a command description. -ainfo (Get NPAR Adapter Information) To get NPAR adapter information, issue the following co...

7–NIC Partitioning (NPAR) Noninteractive Commands -eswitchstats (Display eSwitch Statistics) SN0054667-00 C 7-3 -eswitchstats (Display eSwitch Statistics) To display eSwitch statistics, issue the following command: > qaucli -npar -eswitchstats < port_inst > where  < port_inst > is th...

7–NIC Partitioning (NPAR) Noninteractive Commands -peswitchcfg (Change eSwitch Configuration—Physical Port) SN0054667-00 C 7-5 -peswitchcfg (Change eSwitch Configuration—Physical Port) To change eSwitch physical port configuration, issue the following command: > qaucli -npar -peswitchcfg < por...

SN0054667-00 C 8-1 8 NIC Interactive Commands This chapter describes the interactive mode command line options for Intelligent Ethernet Adapters. The interactive mode uses a series of menus from which you select the option you want and type the number for that option. For information on noninteracti...

8–NIC Interactive CommandsAdapter Information 8-2 SN0054667-00 C Adapter Information 1. Adapter Information  1. Converged Network Adapter From the main menu, select the Adapter Information option, and then select the adapter type ( Converged Network Adapter ). The Converged Network Adapter Informat...

8–NIC Interactive Commands CNA Adapter Information (-icna) SN0054667-00 C 8-3 CNA Adapter Information (-icna) 1. Adapter Information  1. Converged Network Adapter  1. CNA Adapter Information From the Converged Network Adaptor Information menu, select the CNA Adapter Information option. From the ad...

8–NIC Interactive CommandsCNA Port Information (-pinfo) 8-4 SN0054667-00 C CNA Port Information (-pinfo) 1. Adapter Information  1. Converged Network Adapter  2. CNA Port Information From the Converged Network Adaptor Information menu, select the CNA Port Information option. From the port menu, se...

8–NIC Interactive Commands CNA VPD Information (-i) SN0054667-00 C 8-5 CNA VPD Information (-i) 1. Adapter Information  1. Converged Network Adapter  3. CNA VPD Information From the Converged Network Adaptor Information menu, select the CNA VPD Information option. From the port menu, select a port...

8–NIC Interactive CommandsAdapter Configuration 8-6 SN0054667-00 C Adapter Configuration 2. Adapter Configuration  1. CNA Configuration From the main menu, select the Adapter Configuration option, and then select the adapter type ( CNA Configuration ). The Converged Network Adapter (CNA) NIC Config...

8–NIC Interactive Commands NIC Port Setting Configuration SN0054667-00 C 8-7 NIC Port Setting Configuration 2. Adapter Configuration  1. CNA Configuration  2. NIC Port Setting Configuration From the Converged Network Adapter (CNA) NIC Configuration menu, select the NIC Port Setting Configuration o...

8–NIC Interactive CommandsNIC Port Setting Configuration 8-8 SN0054667-00 C Display Configured Port Settings (-iset) 2. Adapter Configuration  1. CNA Configuration  2. NIC Port Setting Configuration  <port selection>  1. Display Configured Port Settings From the Port Settings Menu, select ...

8–NIC Interactive Commands Adapter Updates SN0054667-00 C 8-9 Change MAC Alias Name (-n) 2. Adapter Configuration  1. CNA Configuration  2. NIC Port Setting Configuration  <port selection>  4. Change MAC Alias Name From the Port Settings Menu, select the Change MAC Alias Name option to cha...

8–NIC Interactive CommandsFlash Update (-updimages) 8-10 SN0054667-00 C Flash Update (-updimages) 3. Adapter Updates  1. Converged Network Adapter  1. Flash Update From the CNA Adapter Update menu, select the Flash Update option to update flash memory. From the adapter menu, select an adapter for ...

8–NIC Interactive Commands Register Test (-testregister) SN0054667-00 C 8-11 Register Test (-testregister) 4. Adapter Diagnostics  1. Converged Network Adapter  1. Register Test From the Converged Network Adapter (CNA) Diagnostics menu, select the Register Test option. From the port menu, select a...

8–NIC Interactive CommandsHardware Test (-testhw) 8-12 SN0054667-00 C Hardware Test (-testhw) 4. Adapter Diagnostics  1. Converged Network Adapter  2. Hardware Test From the Converged Network Adapter (CNA) Diagnostics menu, select the Hardware Test option. From the port menu, select a port for whi...

8–NIC Interactive Commands Interrupt Test (-testinterrupt) SN0054667-00 C 8-13 Interrupt Test (-testinterrupt) 4. Adapter Diagnostics  1. Converged Network Adapter  3. Interrupt Test From the Converged Network Adapter (CNA) Diagnostics menu, select the Interrupt Test option. From the port menu, se...

8–NIC Interactive CommandsLink Test (-testlink) 8-14 SN0054667-00 C Link Test (-testlink) 4. Adapter Diagnostics  1. Converged Network Adapter  5. Link Test From the Converged Network Adapter (CNA) Diagnostics menu, select the Link Test option. From the port menu, select a port to test the links. ...

8–NIC Interactive Commands Beacon/LED Test (-testled) SN0054667-00 C 8-15 Beacon/LED Test (-testled) 4. Adapter Diagnostics  1. Converged Network Adapter  6. Beacon/LED Test From the Converged Network Adapter (CNA) Diagnostics menu, select the Beacon/LED Test option. From the port menu, select a p...

8–NIC Interactive CommandsDisplay NIC Port Statistics (-statport) 8-16 SN0054667-00 C Display NIC Port Statistics (-statport) 5. Adapter Statistics  1. Converged Network Adapter  1. Display NIC Port Statistics From the Converged Network Adapter (CNA) Statistics menu, select the Display NIC Port St...

8–NIC Interactive Commands Reset NIC Statistics (-sreset) SN0054667-00 C 8-17 Reset NIC Statistics (-sreset) 5. Adapter Statistics  1. Converged Network Adapter  2. Reset NIC Statistics From the Converged Network Adapter (CNA) Statistics menu, select the Reset NIC Statistics option. From the port ...

8–NIC Interactive CommandsRefresh 8-18 SN0054667-00 C Refresh 6. Refresh From the main menu, select the Refresh option to refresh (reload) the adapters and adapter port indexes. For example: Scanning for QLogic adapters, please wait...Using config file: C:\Program Files\...\iscli.cfgUsing config fil...

SN0054667-00 C 9-1 9 Fibre Channel Interactive Commands This chapter describes the interactive mode command line options for Fibre Channel Adapters. The interactive mode uses a series of menus from which you select the option you want by typing the number for that option. For information about nonin...

9–Fibre Channel Interactive CommandsAdapter Information 9-2 SN0054667-00 C Adapter Information 1. Adapter Information  2. Fibre Channel Adapter From the main menu, select the Adapter Information option and then select 2 ( Fibre Channel Adapter ). The FC Adapter Information menu presents options to ...

9–Fibre Channel Interactive Commands FC Adapter Information (-i) SN0054667-00 C 9-3 FC Adapter Information (-i) 1. Adapter Information  2. Fibre Channel Adapter  <adapter selection>  1. FC Adapter Information From the FC Adapter Information menu, select the FC Adapter Information option. Fr...

9–Fibre Channel Interactive CommandsFC Port Information (-i) 9-4 SN0054667-00 C FC Port Information (-i) 1. Adapter Information  2. Fibre Channel Adapter  2. FC Port Information From the FC Adapter Information menu, select the FC Port Information option. From the port menu, select a port for which...

9–Fibre Channel Interactive Commands FC VPD Information (-i) SN0054667-00 C 9-5 FC VPD Information (-i) 1. Adapter Information  2. Fibre Channel Adapter  3. FC VPD Information From the FC Adapter Information menu, select the FC VPD Information option. From the port menu, select a port for which to...

9–Fibre Channel Interactive CommandsFC Target/LUN Information 9-6 SN0054667-00 C FC Target/LUN Information 1. Adapter Information  2. Fibre Channel Adapter  4. FC Target/LUN Information From the FC Adapter Information menu, select the FC Target/LUN Information option. From the port menu, select a ...

9–Fibre Channel Interactive CommandsHBA Parameters 9-8 SN0054667-00 C HBA Parameters 2. Adapter Configuration  2. Fibre Channel Adapter  1. HBA Parameters From the Fibre Channel Adapter Configuration menu, select the HBA Parameters option. From the port menu, select a port to open the HBA Paramete...

9–Fibre Channel Interactive Commands HBA Parameters SN0054667-00 C 9-9 Display HBA Parameters (-c) 1. HBA Parameters  <port selection>  1. Display HBA Parameters From the HBA Parameters Menu, select the Display HBA Parameters option to view adapter parameters. For example: ------------------...

9–Fibre Channel Interactive CommandsHBA Parameters 9-10 SN0054667-00 C Configure HBA Parameters (-n) 1. HBA Parameters  <port selection>  2. Configure HBA Parameters From the HBA Parameters Menu, select the Configure HBA Parameters option to open the Configure Parameters Menu with options to...

9–Fibre Channel Interactive Commands HBA Parameters SN0054667-00 C 9-11 Restore Defaults 1. HBA Parameters  <port selection>  3. Restore Defaults From the HBA Parameters Menu, select the Restore Defaults option to reset the adapter parameters to their default values. For example: Warning: Pl...

9–Fibre Channel Interactive CommandsTarget Persistent Bindings (-p) 9-12 SN0054667-00 C Target Persistent Bindings (-p) 2. Adapter Configuration  2. Fibre Channel Adapter  2. Target Persistent Bindings From the Fibre Channel Adapter Configuration menu, select the Target Persistent Bindings option....

9–Fibre Channel Interactive Commands Target Persistent Bindings (-p) SN0054667-00 C 9-13 Display Configuration 2. Adapter Configuration  2. Fibre Channel Adapter  2. Target Persistent Bindings  <port selection>  1. Display Configuration From the Target Persistent Bindings Menu, select the ...

9–Fibre Channel Interactive CommandsTarget Persistent Bindings (-p) 9-14 SN0054667-00 C Bind Target(s) 2. Adapter Configuration  2. Fibre Channel Adapter  2. Target Persistent Bindings  <port selection>  2. Bind Target(s) From the Target Persistent Binding Menu, select the Bind Target(s) o...

9–Fibre Channel Interactive Commands Target Persistent Bindings (-p) SN0054667-00 C 9-15 Unbind Target(s) 2. Adapter Configuration  2. Fibre Channel Adapter  2. Target Persistent Bindings  <port selection>  3. Unbind Target(s) From the LUN List Menu, select the Unbind Target(s) option to u...

9–Fibre Channel Interactive CommandsBoot Devices Configuration 9-16 SN0054667-00 C 2: Commit Changes 3: Cancel Boot Devices Configuration 2. Adapter Configuration  2. Fibre Channel Adapter  3. Boot Devices Configuration From the Fibre Channel Adapter Configuration menu, select the Boot Devices Con...

9–Fibre Channel Interactive Commands Boot Devices Configuration SN0054667-00 C 9-17 Display Boot Device(s) (-e) 3. Boot Devices Configuration  <port selection>  1. Display Boot Device(s) From the Boot Device Settings Menu, select the Display Boot Device(s) option to view boot devices. For ex...

9–Fibre Channel Interactive Commands Boot Devices Configuration SN0054667-00 C 9-19 Primary Boot Device 3. Boot Devices Configuration  <port selection>  2. Configure Boot Device(s)  1. Primary Boot Device From the Boot Device Settings Menu, select the Primary Boot Device option to configure...

9–Fibre Channel Interactive CommandsBoot Devices Configuration 9-20 SN0054667-00 C Alternate 1 (2, 3) Boot Device 3. Boot Devices Configuration  <port selection>  2. Configure Boot Device(s)  2. Alternate 1 Boot Device From the Boot Device Settings Menu, select the Alternate n Boot Device o...

9–Fibre Channel Interactive Commands Target Link Speed (iiDMA) SN0054667-00 C 9-21 Target Link Speed (iiDMA) 2. Adapter Configuration  2. Fibre Channel Adapter  4. Target Link Speed (iiDMA) From the Fibre Channel Adapter Configuration menu, select the Target Link Speed (iiDMA) option. From the por...

9–Fibre Channel Interactive CommandsTarget Link Speed (iiDMA) 9-22 SN0054667-00 C Advanced Configuration 2. Adapter Configuration  2. Fibre Channel Adapter  4. Target Link Speed (iiDMA)  2. Advanced Configuration From the iiDMA Menu, select the Advanced Configuration option to select a target dev...

9–Fibre Channel Interactive Commands Export (Save) Configuration SN0054667-00 C 9-23 Export (Save) Configuration 2. Adapter Configuration  2. Fibre Channel Adapter  5. Export (Save) Configuration From the Fibre Channel Adapter Configuration menu, select the Export (Save) Configuration option. From...

9–Fibre Channel Interactive CommandsGenerate Reports 9-24 SN0054667-00 C Generate Reports 2. Adapter Configuration  2. Fibre Channel Adapter  5. Generate Reports From the Fibre Channel Adapter Configuration menu, select the Generate Reports option. From the port menu, select a port to for which to...

9–Fibre Channel Interactive Commands Adapter Updates SN0054667-00 C 9-25 Adapter Updates 3. Adapter Updates  2. Fibre Channel Adapter From the main menu, select the Adapter Updates option and then select 2 ( Fibre Channel Adapter ). The Fibre Channel Adapter Update menu presents options options to ...

9–Fibre Channel Interactive Commands Parameters Template Update SN0054667-00 C 9-27 Parameters Template Update 3. Adapter Updates  2. Fibre Channel Adapter  3. Parameters Template Update From the Fibre Channel Update menu, select the Parameters Template Update option. From the port menu, select a ...

9–Fibre Channel Interactive CommandsAdapter Diagnostics 9-28 SN0054667-00 C Adapter Diagnostics 4. Adapter Diagnostics  2. Fibre Channel Adapter From the main menu, select the Adapter Diagnostics option and then select 2 ( Fibre Channel Adapter ). The FC Diagnostics menu presents options to perform...

9–Fibre Channel Interactive Commands Loopback Test (-kl) SN0054667-00 C 9-29 Loopback Test (-kl) 4. Adapter Diagnostics  2. Fibre Channel Adapter  1. Loopback Test From the FC Diagnostics menu, select the Loopback Test option. From the port menu, select a port to open the Loopback Test menu with o...

9–Fibre Channel Interactive CommandsLoopback Test (-kl) 9-30 SN0054667-00 C Display Test Parameters 4. Adapter Diagnostics  2. Fibre Channel Adapter  1. Loopback Test  <port selection>  1. Display Test Parameters From the Loopback Test menu, select the Display Test Parameters option to vie...

9–Fibre Channel Interactive Commands Loopback Test (-kl) SN0054667-00 C 9-31 Configure Test Parameters 4. Adapter Diagnostics  2. Fibre Channel Adapter  1. Loopback Test  <port selection>  3. Configure Test Parameters From the Loopback Test menu, select the Configure Test Parameters option...

9–Fibre Channel Interactive CommandsLoopback Test (-kl) 9-32 SN0054667-00 C Start Diagnostics Test 4. Adapter Diagnostics  2. Fibre Channel Adapter  1. Loopback Test  <port selection>  4. Start Diagnostics Test From the Loopback Test menu, select the Start Diagnostics Test option to run th...

9–Fibre Channel Interactive Commands Read Write Buffer Test SN0054667-00 C 9-33 Read Write Buffer Test 4. Adapter Diagnostics  2. Fibre Channel Adapter  2. Read Write Buffer Test From the FC Diagnostics menu, select the Read Write Buffer Test option. From the port menu, select a port to open the R...

9–Fibre Channel Interactive Commands Transceiver Diagnostics Monitoring Interface (DMI) SN0054667-00 C 9-35 Transceiver Diagnostics Monitoring Interface (DMI) 4. Adapter Diagnostics  2. Fibre Channel Adapter  3. Transceiver Diagnostics Monitoring Interface (DMI) From the FC Diagnostics menu, selec...

9–Fibre Channel Interactive CommandsTransceiver Diagnostics Monitoring Interface (DMI) 9-36 SN0054667-00 C General (-dm) 3. Transceiver Diagnostics Monitoring Interface (DMI)  <port selection>  1. General From the Transceiver Diagnostics Monitoring Interface menu, select the General option t...

9–Fibre Channel Interactive Commands Transceiver Diagnostics Monitoring Interface (DMI) SN0054667-00 C 9-37 Details (-dm) 3. Transceiver Diagnostics Monitoring Interface (DMI)  <port selection>  2. Details From the Transceiver Diagnostics Monitoring Interface menu, select the Details option ...

9–Fibre Channel Interactive CommandsAdapter Statistics 9-38 SN0054667-00 C Adapter Statistics 5. Adapter Statistics  2. Fibre Channel Adapter From the main menu, select the Adapter Statistics option, and then select the adapter type ( Fibre Channel Adapter ). The FC Statistics menu presents options...

9–Fibre Channel Interactive Commands Display FC Port Statistics SN0054667-00 C 9-39 Display FC Port Statistics 5. Adapter Statistics  2. Fibre Channel Adapter  1. Display FC Port Statistics From the FC Statistics menu, select the Display FC Port Statistics option. From the port menu, select a port...

9–Fibre Channel Interactive CommandsDisplay FC Port Statistics 9-40 SN0054667-00 C Display Parameters (-gs) 1. Display FC Port Statistics  <port selection>  1. Display Parameters From the HBA Statistics Menu, select the Display Parameters option to view adapter status logging parameters. For...

9–Fibre Channel Interactive Commands Display FC Port Statistics SN0054667-00 C 9-41 Display HBA Statistics (-gs) 1. Display FC Port Statistics  <port selection>  4. Display HBA Statistics From the HBA Statistics Menu, select the Display HBA Statistics option to view Fibre Channel port statis...

9–Fibre Channel Interactive CommandsDisplay FC Port Link Status 9-42 SN0054667-00 C Display FC Port Link Status 5. Adapter Statistics  2. Fibre Channel Adapter  2. Display FC Port Link Status From the FC Statistics menu, select the Display FC Port Link Status option. From the port menu, select a p...

9–Fibre Channel Interactive Commands Display FC Port Link Status SN0054667-00 C 9-43 Display Parameters 2. Display FC Port Link Status  <port selection>  1. Display Parameters From the Link Statistics Menu, select the Display Parameters option to view link status logging parameters. For exam...

9–Fibre Channel Interactive CommandsDisplay FC Port Link Status 9-44 SN0054667-00 C Display Link Statistics (-ls) 2. Display FC Port Link Status  <port selection>  4. Display Link Statistics From the Link Statistics Menu, select the Display Link Statistics option to view link status informat...

SN0054667-00 C 10-1 10 Converged Network Adapter Interactive Commands This chapter describes the interactive mode command line options for Converged Network Adapters. The interactive mode uses a series of menus from which you select the option you want by typing the number for that option. For infor...

10–Converged Network Adapter Interactive CommandsCNA Adapter Information 10-4 SN0054667-00 C CNA Adapter Information 1. Adapter Information  1. Converged Network Adapter  1. CNA Adapter Information From the Converged Network Adaptor Information menu, select the CNA Adapter Information option. From...

10–Converged Network Adapter Interactive Commands CNA Adapter Information SN0054667-00 C 10-5 NIC 1. Adapter Information  1. Converged Network Adapter  1. CNA Adapter Information  <adapter selection>  1. NIC From the CNA Adapter Information menu, select the NIC option to view NIC adapter i...

10–Converged Network Adapter Interactive CommandsCNA Port Information 10-6 SN0054667-00 C iSCSI 1. Adapter Information  1. Converged Network Adapter  1. CNA Adapter Information  <adapter selection>  3. iSCSI From the CNA Adapter Information menu, select the iSCSI option to view iSCSI adapt...

10–Converged Network Adapter Interactive Commands CNA Port Information SN0054667-00 C 10-7 NIC 1. Adapter Information  1. Converged Network Adapter  2. CNA Port Information  <port selection>  1. NIC From the CNA Port Information menu, select the NIC option to view NIC port information. For...

10–Converged Network Adapter Interactive CommandsCNA Port Information 10-8 SN0054667-00 C FCoE 1. Adapter Information  1. Converged Network Adapter  2. CNA Port Information  <port selection>  2. FCoE CNA Port Information menu, select the FCoE option to view FCoE port information. For examp...

10–Converged Network Adapter Interactive Commands CNA VPD Information SN0054667-00 C 10-9 iSCSI 1. Adapter Information  1. Converged Network Adapter  2. CNA Port Information  <port selection>  3. iSCSI CNA Port Information menu, select the iSCSI option to view iSCSI port information. For e...

10–Converged Network Adapter Interactive CommandsCNA VPD Information 10-10 SN0054667-00 C NIC 1. Adapter Information  1. Converged Network Adapter  3. CNA VPD Information  <port selection>  1. NIC From the CNA VPD Information menu, select the NIC option to view NIC port VPD information. Fo...

10–Converged Network Adapter Interactive Commands CNA VLAN Information SN0054667-00 C 10-11 iSCSI 1. Adapter Information  1. Converged Network Adapter  3. CNA VPD Information  <port selection>  3. iSCSI From the CNA VPD Information menu, select the iSCSI option to view iSCSI port VPD infor...

10–Converged Network Adapter Interactive CommandsTeaming Information 10-12 SN0054667-00 C Teaming Information 1. Adapter Information  1. Converged Network Adapter  5. Teaming Information From the Converged Network Adaptor Information menu, select the Teaming Information option to view teaming info...

10–Converged Network Adapter Interactive Commands CNA FCoE Information SN0054667-00 C 10-13 CNA FCoE Information 1. Adapter Information  1. Converged Network Adapter  6. CNA FCoE Information From the Converged Network Adaptor Information menu, select the CNA FCoE Information option to view FCoE in...

10–Converged Network Adapter Interactive CommandsCNA FCoE Information 10-14 SN0054667-00 C NIC 1. Adapter Information  1. Converged Network Adapter  6. CNA FCoE Information  <port selection>  1. NIC From the CNA FCoE Information menu, select the NIC option to view FCoE NIC port information...

10–Converged Network Adapter Interactive Commands CNA FCoE Information SN0054667-00 C 10-15 FCoE 1. Adapter Information  1. Converged Network Adapter  6. CNA FCoE Information  <port selection>  2. FCoE From the CNA FCoE Information menu, select the FCoE option to open the FCoE Utilities Me...

10–Converged Network Adapter Interactive CommandsCNA FCoE Information 10-16 SN0054667-00 C Data Center Bridging 6. CNA FCoE Information  <port selection>  2. FCoE  2. Data Center Bridging From the FCoE Utilities Menu, select the Data Center Bridging option to view data center bridging infor...

10–Converged Network Adapter Interactive Commands CNA FCoE Information SN0054667-00 C 10-17 For example: DCE Statistics =======================================================CNA : 0 Port: 1SN : AFE1028C03899ENode MacAddr : 00:0E:1E:04:95:EBCNA Model : QLE8242CNA Desc. : QLE8242 QLogic Pci Express t...

10–Converged Network Adapter Interactive CommandsCNA FCoE Information 10-18 SN0054667-00 C TLV 6. CNA FCoE Information  <port selection>  2. FCoE  4. TLV From the FCoE Utilities Menu, select the TLV option to open the TLV menu with options to view detailed and raw type-length-value informat...

10–Converged Network Adapter Interactive Commands CNA iSCSI Information SN0054667-00 C 10-19 CNA iSCSI Information 1. Adapter Information  1. Converged Network Adapter  7. CNA iSCSI Information From the Converged Network Adaptor Information menu, select the CNA iSCSI Information option. From the p...

10–Converged Network Adapter Interactive CommandsCNA Port Target/LUN Information 10-20 SN0054667-00 C CNA Port Target/LUN Information 1. Adapter Information  1. Converged Network Adapter  8. CNA Port Target/LUN Information From the Converged Network Adaptor Information menu, select the CNA Port Ta...

10–Converged Network Adapter Interactive Commands CNA Port Target/LUN Information SN0054667-00 C 10-21 iSCSI 8. CNA Port Target/LUN Information  <port selection>  1. iSCSI From the CNA Port Target/LUN Information menu, select the iSCSI option to view iSCSI target/LUN information. For example...

10–Converged Network Adapter Interactive CommandsAdapter Configuration 10-24 SN0054667-00 C Adapter Configuration 2. Adapter Configuration  1. CNA Configuration From the main menu, select the Adapter Configuration option, and then select the configuration type ( CNA Configuration ). The Converged N...

10–Converged Network Adapter Interactive Commands CNA FCoE Configuration SN0054667-00 C 10-25 HBA Parameters 2. Adapter Configuration  1. CNA Configuration  1. CNA FCoE Configuration  1. HBA Parameters From the Converged Network Adapter (CNA) FCoE Configuration menu, select the HBA Parameters opt...

10–Converged Network Adapter Interactive CommandsCNA FCoE Configuration 10-26 SN0054667-00 C Display HBA Parameters From the HBA Parameters menu, select the Display HBA Parameters option to view adapter parameters. For example: ------------------------------------------------------------------------...

10–Converged Network Adapter Interactive Commands CNA FCoE Configuration SN0054667-00 C 10-29 Target Persistent Binding 2. Adapter Configuration  1. CNA Configuration  1. CNA FCoE Configuration  2. Target Persistent Binding From the Converged Network Adapter (CNA) FCoE Configuration menu, select ...

10–Converged Network Adapter Interactive CommandsCNA FCoE Configuration 10-30 SN0054667-00 C Display Configuration 1. CNA FCoE Configuration  2. Target Persistent Binding  1. Display Configuration From the Target Persistent Binding Menu, select the Display Configuration option to view the target p...

10–Converged Network Adapter Interactive Commands CNA FCoE Configuration SN0054667-00 C 10-33 Boot Devices Configuration 2. Adapter Configuration  1. CNA Configuration  1. CNA FCoE Configuration  3. Boot Devices Configuration From the Converged Network Adapter (CNA) FCoE Configuration menu, selec...

10–Converged Network Adapter Interactive CommandsCNA FCoE Configuration 10-36 SN0054667-00 C Virtual Ports (NPIV) 2. Adapter Configuration  1. CNA Configuration  1. CNA FCoE Configuration  4. Virtual Ports (NPIV) From the Converged Network Adapter (CNA) FCoE Configuration menu, select the Virtual...

10–Converged Network Adapter Interactive Commands CNA FCoE Configuration SN0054667-00 C 10-37 View vPorts Info 1. CNA FCoE Configuration  4. Virtual Ports (NPIV)  <port selection>  1. View vPorts Info From the vPorts Menu, select the View vPorts Info option to select a virtual port and view...

10–Converged Network Adapter Interactive CommandsCNA FCoE Configuration 10-38 SN0054667-00 C Create vPorts 1. CNA FCoE Configuration  4. Virtual Ports (NPIV)  <port selection>  2. Create vPorts From the vPorts Menu, select the Create vPorts option to open the Create vPorts Menu with options...

10–Converged Network Adapter Interactive Commands CNA FCoE Configuration SN0054667-00 C 10-39 Delete vPorts 1. CNA FCoE Configuration  4. Virtual Ports (NPIV)  <port selection>  3. Delete vPorts From the vPorts Menu, select the Delete vPorts option to select and delete virtual ports. For ex...

10–Converged Network Adapter Interactive CommandsCNA FCoE Configuration 10-40 SN0054667-00 C Driver Parameters 2. Adapter Configuration  1. CNA Configuration  1. CNA FCoE Configuration  5. Driver Parameters From the Converged Network Adapter (CNA) FCoE Configuration menu, select the Driver Parame...

10–Converged Network Adapter Interactive Commands CNA FCoE Configuration SN0054667-00 C 10-41 Present persistently bound target(s) plus any new target(s) with driver defaults 1. CNA FCoE Configuration  5. Driver Parameters  <port selection>  1. Present persistently bound targets plus any ne...

10–Converged Network Adapter Interactive CommandsCNA FCoE Configuration 10-42 SN0054667-00 C Commit Changes 1. CNA FCoE Configuration  5. Driver Parameters  <port selection>  5. Commit Changes From the Drive Settings Menu, select the Commit Changes option to save and activate target binding...

10–Converged Network Adapter Interactive Commands CNA FCoE Configuration SN0054667-00 C 10-43 Selective LUNs 2. Adapter Configuration  1. CNA Configuration  1. CNA FCoE Configuration  6. Selective LUNs From the Converged Network Adapter (CNA) FCoE Configuration menu, select the Selective LUNs opt...

10–Converged Network Adapter Interactive CommandsCNA FCoE Configuration 10-44 SN0054667-00 C Manual Configure LUNs 1. CNA FCoE Configuration  6. Selective LUNs  <port selection>  2. Manual Configure LUNs Select the Manual Configure LUNs option to open the Selective LUN Menu with options to ...

10–Converged Network Adapter Interactive CommandsCNA FCoE Configuration 10-46 SN0054667-00 C Auto Configure LUNs 1. CNA FCoE Configuration  6. Selective LUNs  <port selection>  3. Auto Configure LUNs Select the Auto Configure LUNs option to automatically enable or disable all LUNs on all ta...

10–Converged Network Adapter Interactive Commands CNA FCoE Configuration SN0054667-00 C 10-47 Export (Save) Configuration 2. Adapter Configuration  1. CNA Configuration  1. CNA FCoE Configuration  7. Export (Save) Configuration From the Converged Network Adapter (CNA) FCoE Configuration menu, sel...

10–Converged Network Adapter Interactive CommandsCNA FCoE Configuration 10-48 SN0054667-00 C Generate Reports 2. Adapter Configuration  1. CNA Configuration  1. CNA FCoE Configuration  8. Generate Reports From the Converged Network Adapter (CNA) FCoE Configuration menu, select the Generate Report...

10–Converged Network Adapter Interactive Commands CNA iSCSI Configuration SN0054667-00 C 10-49 ------------------------------------------------------------------------------Host Name : APPS4055HBA Instance : 0HBA Model : QLE8242HBA Description : QLE8242 QLogic Pci Express to 10GbE Dual Channel CNA (...

10–Converged Network Adapter Interactive CommandsCNA iSCSI Configuration 10-50 SN0054667-00 C HBA Level Parameter Configuration 2. Adapter Configuration  1. CNA Configuration  2. CNA iSCSI Configuration  1. HBA Level Parameter Configuration From the Converged Network Adapter (CNA) iSCSI Configura...

10–Converged Network Adapter Interactive Commands CNA iSCSI Configuration SN0054667-00 C 10-51 Display HBA Level Parameters 2. CNA iSCSI Configuration  1. HBA Level Parameter Configuration  1. Display HBA Level Parameters Select the Display HBA Level Parameters option to view adapter parameters. F...

10–Converged Network Adapter Interactive CommandsCNA iSCSI Configuration 10-52 SN0054667-00 C Port Configuration 2. Adapter Configuration  1. CNA Configuration  2. CNA iSCSI Configuration  2. Port Configuration From the Converged Network Adapter (CNA) iSCSI Configuration menu, select the Port Con...

10–Converged Network Adapter Interactive Commands CNA iSCSI Configuration SN0054667-00 C 10-53 Port Link Settings Menu 2. CNA iSCSI Configuration  2. Port Configuration  <port selection>  1. Port Link Settings Menu From the Port Link Configuration menu, select the Port Link Settings Menu op...

10–Converged Network Adapter Interactive CommandsCNA iSCSI Configuration 10-54 SN0054667-00 C Configure Link Configuration Select this option to configure the link. For example: ------------------------------------------------------------------This operation is not available for this adapter (8242)....

10–Converged Network Adapter Interactive Commands CNA iSCSI Configuration SN0054667-00 C 10-55 Display Configure Port Settings Select this option to view the configured port settings. For example: ------------------------------------------------------------------*** Displaying ISCSI Settings inst=1 ...

10–Converged Network Adapter Interactive CommandsCNA iSCSI Configuration 10-56 SN0054667-00 C Port Firmware Settings Menu Select this option to open the Port Firmware Settings menu with options to view configured port settings, edit a specific port setting, configure iSCSI settings, configure firmwa...

10–Converged Network Adapter Interactive Commands CNA iSCSI Configuration SN0054667-00 C 10-57  Display Configured Port Settings — Select this option to view configured port settings. For example: -------------------------------------------------------------*** Displaying ISCSI Settings inst=1 ***F...

10–Converged Network Adapter Interactive CommandsCNA iSCSI Configuration 10-58 SN0054667-00 C  Configure Firmware Settings — Select this option to configure firmware settings. For example: FW_ZIO_Enable_Mode [off] :AFW_Device_Timeouts [on] :AFW_Delayed_Ack [off] :AFW_AutoConnect [on] :  Configure ...

10–Converged Network Adapter Interactive Commands CNA iSCSI Configuration SN0054667-00 C 10-59  Configure Advanced Settings — Select this option to configure advanced settings. For more information about these settings, refer to Table 6-3 . For example: FW_ZIO_Enable_Mode [off] :AFW_Device_Timeouts...

10–Converged Network Adapter Interactive CommandsCNA iSCSI Configuration 10-60 SN0054667-00 C  Configure IPV6 Settings — Select this option to configure IPV6 settings. For example: IPv6_Addr_Local_link [fe80::] :IPv6_Addr_Routable0 [::] :IPv6_Addr_Routable1 [::] :Default_IPv6_Router [::] :IPv6_Port...

10–Converged Network Adapter Interactive Commands CNA iSCSI Configuration SN0054667-00 C 10-61 BIOS/UEFI Settings Menu 2. CNA iSCSI Configuration  2. Port Configuration  <port selection>  4. BIOS/UEFI Settings Menu From the Port Link Configuration menu, select the BIOS/UEFI Settings Menu op...

10–Converged Network Adapter Interactive CommandsCNA iSCSI Configuration 10-62 SN0054667-00 C Set Primary Boot Target Information Select this option to set the primary boot target parameters. For example: Please Enter Selection: 3 Target ID: 2 hba_no: 1 IP: 192.168.30.85 Port: 3260 TGT Instance #: 2...

10–Converged Network Adapter Interactive CommandsCNA iSCSI Configuration 10-64 SN0054667-00 C Port IP Settings 2. Adapter Configuration  1. CNA Configuration  2. CNA iSCSI Configuration  3. Port IP Settings From the Converged Network Adapter (CNA) iSCSI Configuration menu, select the Port IP Sett...

10–Converged Network Adapter Interactive Commands CNA iSCSI Configuration SN0054667-00 C 10-65 Display Network Settings 2. CNA iSCSI Configuration  3. Port IP Settings  <port selection>  1. Display Network Settings Select the Display Network Settings option to view the IPV4 or IPV6 address,...

10–Converged Network Adapter Interactive CommandsCNA iSCSI Configuration 10-66 SN0054667-00 C Target Configuration 2. Adapter Configuration  1. CNA Configuration  2. CNA iSCSI Configuration  4. Target Configuration From the Converged Network Adapter (CNA) iSCSI Configuration menu, select the Targ...

10–Converged Network Adapter Interactive Commands CNA iSCSI Configuration SN0054667-00 C 10-67 List Targets 2. CNA iSCSI Configuration  4. Target Configuration  <port selection>  1. List Targets From the Target Configuration menu, select the List Targets option to view a list of target devi...

10–Converged Network Adapter Interactive CommandsCNA iSCSI Configuration 10-68 SN0054667-00 C Display Target Information 2. CNA iSCSI Configuration  4. Target Configuration  <port selection>  2. Display Target Information Select the Display Target Information option to view target device in...

10–Converged Network Adapter Interactive Commands CNA iSCSI Configuration SN0054667-00 C 10-69 Delete Target 2. CNA iSCSI Configuration  4. Target Configuration  <port selection>  4. Delete Target Select the Delete Target option to delete a target device. For example: Target ID: 3 hba_no: 1...

10–Converged Network Adapter Interactive CommandsCNA iSCSI Configuration 10-70 SN0054667-00 C Configure Target Parameters 2. CNA iSCSI Configuration  4. Target Configuration  <port selection>  5. Configure Target Parameters Select the Configure Target Parameters option to configure target d...

10–Converged Network Adapter Interactive Commands CNA iSCSI Configuration SN0054667-00 C 10-71 Add A Target 2. CNA iSCSI Configuration  4. Target Configuration  <port selection>  6. Add A Target Select the Add A Target option to add a target device. For example: IPv6 Target? [off]:TGT_iSCSI...

10–Converged Network Adapter Interactive CommandsCNA iSCSI Configuration 10-72 SN0054667-00 C Configure Target Authentication Menu 2. CNA iSCSI Configuration  4. Target Configuration  <port selection>  9. Configure Target Authentication Menu Select the Confirm Target Authentication Menu opt...

10–Converged Network Adapter Interactive Commands CNA iSCSI Configuration SN0054667-00 C 10-73 Display Targets Using CHAP Entries Select this option to view targets that are configured for CHAP. For example: ------------------------------------------------------------------Targets configured for CHA...

10–Converged Network Adapter Interactive CommandsCNA iSCSI Configuration 10-74 SN0054667-00 C Add a Default BIDI CHAP Select this option to add a bidirectional secret to a CHAP entry. For example: CHAPSecret [] : abcdefghijklmnop Edit a CHAP entry Select this option to edit a CHAP entry. Delete a CH...

10–Converged Network Adapter Interactive Commands CNA iSCSI Configuration SN0054667-00 C 10-75 Target Discovery Menu 2. CNA iSCSI Configuration  4. Target Configuration  <port selection>  10. Target Discovery Menu Select the Target Discovery Menu option to open the Target Discovery Menu wit...

10–Converged Network Adapter Interactive CommandsCNA iSCSI Configuration 10-76 SN0054667-00 C Display Discovered Targets Select this option to view discovered target devices. For example: ------------------------------------------------------------------Persistent Target List------------------------...

10–Converged Network Adapter Interactive CommandsCNA iSCSI Configuration 10-78 SN0054667-00 C List LUN information 2. CNA iSCSI Configuration  4. Target Configuration  <port selection>  11. List LUN information Select the List LUN information option to view LUN information for persistent an...

10–Converged Network Adapter Interactive Commands CNA iSCSI Configuration SN0054667-00 C 10-79 Boot Devices Configuration 2. Adapter Configuration  1. CNA Configuration  2. CNA iSCSI Configuration  5. Boot Devices Configuration From the Converged Network Adapter (CNA) iSCSI Configuration menu, se...

10–Converged Network Adapter Interactive CommandsCNA iSCSI Configuration 10-80 SN0054667-00 C Set Primary Boot Target Information 2. CNA iSCSI Configuration  5. Boot Devices Configuration  <port selection>  3. Set Primary Boot Target Information From the BIOS/UEFI Settings Menu, select the ...

10–Converged Network Adapter Interactive Commands CNA iSCSI Configuration SN0054667-00 C 10-81 Set Secondary Boot Target Information 2. CNA iSCSI Configuration  5. Boot Devices Configuration  <port selection>  4. Set Secondary Boot Target Information From the BIOS/UEFI Settings Menu, select...

10–Converged Network Adapter Interactive CommandsCNA iSCSI Configuration 10-82 SN0054667-00 C Save changes 2. CNA iSCSI Configuration  5. Boot Devices Configuration  <port selection>  8. Save changes From the BIOS/UEFI Settings Menu, select the Save changes option to save changes. Save chan...

10–Converged Network Adapter Interactive CommandsCNA NIC Configuration 10-84 SN0054667-00 C Save Host Configuration 6. Export (Save) Configuration  <port selection>  1. Save Host Configuration From the Export (Save) Configuration menu, select the Save Host Configuration option to save the ho...

10–Converged Network Adapter Interactive Commands CNA NIC Configuration SN0054667-00 C 10-85 Adapter Alias 2. Adapter Configuration  1. CNA Configuration  3. CNA NIC Configuration  1. Adapter Alias From the Converged Network Adapter (CNA) NIC Configuration menu, select the Adapter Alias option. F...

10–Converged Network Adapter Interactive Commands CNA NIC Configuration SN0054667-00 C 10-87 Display Configured Port Settings 3. CNA NIC Configuration  2. NIC Port Setting Configuration  <port selection>  1. Display Configured Port Settings Select the Display Configured Port Settings option...

10–Converged Network Adapter Interactive CommandsCNA NIC Configuration 10-88 SN0054667-00 C Configure Port Settings 3. CNA NIC Configuration  2. NIC Port Setting Configuration  <port selection>  2. Configure Port Settings Select the Configure Port Settings option to configure port settings....

10–Converged Network Adapter Interactive Commands CNA NIC Configuration SN0054667-00 C 10-89 Change MAC Alias Name 3. CNA NIC Configuration  2. NIC Port Setting Configuration  <port selection>  4. Change MAC Alias Name Select the Change MAC Alias Name option to change the port MAC alias. Fo...

10–Converged Network Adapter Interactive CommandsCNA NIC Configuration 10-90 SN0054667-00 C Display VLAN List 3. CNA NIC Configuration  3. VLAN Configuration  1. Display VLAN List From the Configure VLANs Menu, select the Display VLAN List option to view the VLAN list. For example: VLAN List:CNA: ...

10–Converged Network Adapter Interactive Commands CNA NIC Configuration SN0054667-00 C 10-91 Display VLAN Information 3. CNA NIC Configuration  3. VLAN Configuration  2. Display VLAN Information From the Configure VLANs Menu, select the Display VLAN Information option to view the VLAN information....

10–Converged Network Adapter Interactive CommandsCNA NIC Configuration 10-92 SN0054667-00 C Add VLAN to Port or Team 3. CNA NIC Configuration  3. VLAN Configuration  3. Add VLAN to Port or Team From the Configure VLANs Menu, select the Add VLAN to Port or Team option to add a VLAN. For example: VL...

10–Converged Network Adapter Interactive Commands CNA NIC Configuration SN0054667-00 C 10-93 Configure VLAN Parameters 3. CNA NIC Configuration  3. VLAN Configuration  4. Configure VLAN Parameters From the Configure VLANs Menu, select the Configure VLAN Parameters option to configure VLAN paramete...

10–Converged Network Adapter Interactive CommandsCNA NIC Configuration 10-94 SN0054667-00 C Refresh 3. CNA NIC Configuration  3. VLAN Configuration  6. Refresh From the Configure VLANs Menu, select the Refresh option to refresh the adapter information. For example: Refreshing CNA data ... Loading:...

10–Converged Network Adapter Interactive Commands CNA NIC Configuration SN0054667-00 C 10-95 Display Teams List 3. CNA NIC Configuration  4. Team Configuration  1. Display Teams List From the Configure Teams Menu, select the Display Teams List option to view the teams list. For example: Team: 1 Te...

10–Converged Network Adapter Interactive CommandsCNA NIC Configuration 10-96 SN0054667-00 C Display Team Information 3. CNA NIC Configuration  4. Team Configuration  2. Display Team Information From the Configure Teams Menu, select the Display Team Information option to view team information. For ...

10–Converged Network Adapter Interactive Commands CNA NIC Configuration SN0054667-00 C 10-97 Configure New Team 3. CNA NIC Configuration  4. Team Configuration  3. Configure New Team From the Configure Teams Menu, select the Configure New Team option to configure a new team. For example: Available...

10–Converged Network Adapter Interactive CommandsCNA NIC Configuration 10-98 SN0054667-00 C Configure Team Parameters 3. CNA NIC Configuration  4. Team Configuration  4. Configure Team Parameters From the Configure Teams Menu, select the Configure Team Parameters option to configure team parameter...

10–Converged Network Adapter Interactive Commands CNA NIC Configuration SN0054667-00 C 10-99 Delete Team 3. CNA NIC Configuration  4. Team Configuration  5. Delete Team From the Configure Teams Menu, select the Delete Team option to delete a team. For example: Team Index: 1 Team Description: [Defa...

10–Converged Network Adapter Interactive Commands CNA NIC Configuration SN0054667-00 C 10-101 Set Primary Team Member 3. CNA NIC Configuration  4. Team Configuration  8. Set Primary Team Member From the Configure Teams Menu, select the Set Primary Team Member option to set the primary team member....

10–Converged Network Adapter Interactive CommandsCNA NIC Configuration 10-102 SN0054667-00 C Unset Primary Team Member 3. CNA NIC Configuration  4. Team Configuration  9. Unset Primary Team Member From the Configure Teams Menu, select the Unset Primary Team Member option to unset the primary team ...

10–Converged Network Adapter Interactive Commands CNA NIC Configuration SN0054667-00 C 10-103 Restore VLAN & Teaming Configuration 3. CNA NIC Configuration  4. Team Configuration  11. Restore VLAN & Teaming Configuration From the Configure Teams Menu, select the Restore VLAN & Teaming ...

10–Converged Network Adapter Interactive CommandsAdapter Updates 10-104 SN0054667-00 C Restore VLAN & Teaming Configuration 3. CNA NIC Configuration  5. Export (Save) Configuration  2. Restore VLAN & Teaming Configuration From the Save/Restore VLAN/Teams Menu, select the Restore VLAN &...

10–Converged Network Adapter Interactive Commands Flash Update SN0054667-00 C 10-105 Flash Update 3. Adapter Updates  1. Converged Network Adapter  1. Flash Update From the CNA Adapter Update menu, select the Flash Update option to update flash memory. From the adapter menu, select the adapter for...

10–Converged Network Adapter Interactive CommandsDrivers Update 10-106 SN0054667-00 C Drivers Update 3. Adapter Updates  1. Converged Network Adapter  3. Drivers Update From the CNA Adapter Update menu, select the Drivers Update option to update drivers. From the port menu, select a port for which...

10–Converged Network Adapter Interactive Commands Adapter Diagnostics SN0054667-00 C 10-107 Adapter Diagnostics 4. Adapter Diagnostics  1. Converged Network Adapter From the main menu, select the Adapter Diagnostics option, and then select the adapter model ( CNA Model ). The Converged Network Adap...

10–Converged Network Adapter Interactive CommandsRegister Test 10-108 SN0054667-00 C Register Test 4. Adapter Diagnostics  1. Converged Network Adapter  1. CNA Model  1. Register Test From the Converged Network Adapter (CNA) Diagnostics menu, select the Register Test option. From the port menu, s...

10–Converged Network Adapter Interactive Commands Hardware Test SN0054667-00 C 10-109 Hardware Test 4. Adapter Diagnostics  1. Converged Network Adapter  1. CNA Model  2. Hardware Test From the Converged Network Adapter (CNA) Diagnostics menu, select the Hardware Test option. From the port menu, ...

10–Converged Network Adapter Interactive CommandsFlash Test 10-110 SN0054667-00 C Flash Test 4. Adapter Diagnostics  1. Converged Network Adapter  1. CNA Model  3. Flash Test From the Converged Network Adapter (CNA) Diagnostics menu, select the Flash Test option. From the port menu, select a port...

10–Converged Network Adapter Interactive Commands Interrupt Test SN0054667-00 C 10-111 Interrupt Test 4. Adapter Diagnostics  1. Converged Network Adapter  1. CNA Model  4. Interrupt Test From the Converged Network Adapter (CNA) Diagnostics menu, select the Interrupt Test option. From the port me...

10–Converged Network Adapter Interactive CommandsLink Test 10-112 SN0054667-00 C Link Test 4. Adapter Diagnostics  1. Converged Network Adapter  1. CNA Model  5. Link Test From the Converged Network Adapter (CNA) Diagnostics menu, select the Link Test option. From the port menu, select a port to ...

10–Converged Network Adapter Interactive Commands Loopback Test SN0054667-00 C 10-113 Loopback Test 4. Adapter Diagnostics  1. Converged Network Adapter  1. CNA Model  6. Loopback Test From the Converged Network Adapter (CNA) Diagnostics menu, select the Loopback Test option. From the port menu, ...

10–Converged Network Adapter Interactive CommandsLoopback Test 10-114 SN0054667-00 C FCoE 4. Adapter Diagnostics  1. Converged Network Adapter  1. CNA Model  6. Loopback Test  <port selection>  2. FCoE From the Loopback Test menu, select the FCoE option to open a loopback test submenu wit...

10–Converged Network Adapter Interactive Commands Loopback Test SN0054667-00 C 10-115 Display Test Parameters 6. Loopback Test  <port selection>  2. FCoE  1. Display Test Parameters From the Loopback Test menu, select the Display Test Parameters option to view the loopback test parameters. ...

10–Converged Network Adapter Interactive CommandsLoopback Test 10-116 SN0054667-00 C Configure Test Parameters 6. Loopback Test  <port selection>  2. FCoE  3. Configure Test Parameters From the Loopback Test menu, select the Configure Test Parameters option to open a loopback test submenu w...

10–Converged Network Adapter Interactive Commands Read Write Buffer Test SN0054667-00 C 10-117 Read Write Buffer Test 4. Adapter Diagnostics  1. Converged Network Adapter  7. Read Write Buffer Test From the Converged Network Adapter (CNA) Diagnostics menu, select the Read Write Buffer Test option....

10–Converged Network Adapter Interactive CommandsRead Write Buffer Test 10-118 SN0054667-00 C Display Test Parameters 7. Read Write Buffer Test  <port selection>  1. FCoE  1. Display Test Parameters From the Read Write Buffer Test menu, select the Display Test Parameters option to view the ...

10–Converged Network Adapter Interactive CommandsTransceiver Diagnostics Monitoring Interface (DMI) 10-122 SN0054667-00 C General 9. Transceiver Diagnostics Monitoring Interface (DMI)  <port selection>  1. General From the Transceiver Diagnostics Monitoring Interface (DMI) menu, select the G...

10–Converged Network Adapter Interactive Commands Transceiver Diagnostics Monitoring Interface (DMI) SN0054667-00 C 10-123 Details 9. Transceiver Diagnostics Monitoring Interface (DMI)  <port selection>  2. Details From the Transceiver Diagnostics Monitoring Interface (DMI) menu, select the ...

10–Converged Network Adapter Interactive CommandsiSCSI Adapter Diagnostics 10-124 SN0054667-00 C iSCSI Adapter Diagnostics 4. Adapter Diagnostics  1. Converged Network Adapter  10. iSCSI Adapter Diagnostics From the Converged Network Adapter (CNA) Diagnostics menu, select the iSCSI Adapter Diagnos...

10–Converged Network Adapter Interactive Commands iSCSI Port Diagnostics SN0054667-00 C 10-125 iSCSI Port Diagnostics 4. Adapter Diagnostics  1. Converged Network Adapter  11. iSCSI Port Diagnostics From the Converged Network Adapter (CNA) Diagnostics menu, select the iSCSI Port Diagnostics option...

10–Converged Network Adapter Interactive CommandsiSCSI Port Diagnostics 10-126 SN0054667-00 C Ping Target 11. iSCSI Port Diagnostics  <port selection>  1. Ping Target From the iSCSI Port Diagnostics menu, select Ping Target option to ping a target device. Specify the target IP address, the n...

10–Converged Network Adapter Interactive Commands iSCSI Port Logs SN0054667-00 C 10-127 iSCSI Port Logs 4. Adapter Diagnostics  1. Converged Network Adapter  12. iSCSI Port Logs From the Converged Network Adapter (CNA) Diagnostics menu, select the iSCSI Port Logs option. From the port menu, select...

10–Converged Network Adapter Interactive CommandsiSCSI Port Logs 10-128 SN0054667-00 C Display ARP Table 12. iSCSI Port Logs  <port selection>  1. Display ARP Table From the iSCSI Port Logs menu, select the Display ARP Table option to view the ARP table. For example: ARP Table Entry number 0...

10–Converged Network Adapter Interactive Commands iSCSI Port Logs SN0054667-00 C 10-129 Export Connection Error Log 12. iSCSI Port Logs  <port selection>  3. Export Connection Error Log From the iSCSI Port Logs menu, select the Export Connection Error Log option to export the connection erro...

10–Converged Network Adapter Interactive CommandsAdapter Statistics 10-130 SN0054667-00 C Adapter Statistics 5. Adapter Statistics  1. Converged Network Adapter From the main menu, select the Adapter Statistics option, and then select the adapter type ( Converged Network Adapter ) to open the Conve...

10–Converged Network Adapter Interactive Commands Display NIC Port Statistics SN0054667-00 C 10-131 Display NIC Port Statistics 5. Adapter Statistics  1. Converged Network Adapter  1. Display NIC Port Statistics From the Converged Network Adapter (CNA) Statistics menu, select the Display NIC Port ...

10–Converged Network Adapter Interactive CommandsReset NIC Statistics 10-132 SN0054667-00 C Reset NIC Statistics 5. Adapter Statistics  1. Converged Network Adapter  2. Reset NIC Statistics From the Converged Network Adapter (CNA) Statistics menu, select the Reset NIC Statistics option. From the p...

10–Converged Network Adapter Interactive Commands Display FCoE Port Statistics SN0054667-00 C 10-133 Display FCoE Port Statistics 5. Adapter Statistics  1. Converged Network Adapter  4. Display FCoE Port Statistics From the Converged Network Adapter (CNA) Statistics menu, select the Display FCoE P...

10–Converged Network Adapter Interactive Commands Display FCoE Port Statistics SN0054667-00 C 10-135 Display HBA Statistics (-gs) 4. Display FCoE Port Statistics  <port selection>  4. Display HBA Statistics From the HBA Statistics menu, select the Display HBA Statistics option to view FCoE p...

10–Converged Network Adapter Interactive CommandsDisplay FCoE Port Link Status 10-136 SN0054667-00 C Display FCoE Port Link Status 5. Adapter Statistics  1. Converged Network Adapter  5. Display FCoE Port Link Status From the Converged Network Adapter (CNA) Statistics menu, select the Display FCoE...

10–Converged Network Adapter Interactive CommandsDisplay iSCSI Port Statistics 10-138 SN0054667-00 C Display Link Statistics (-ls) 5. Display FCoE Port Link Status  <port selection>  4. Display Link Statistics From the Link Statistics Menu, select the Display Link Statistics option to view l...

10–Converged Network Adapter Interactive CommandsReset iSCSI Statistics 10-140 SN0054667-00 C Reset iSCSI Statistics 5. Adapter Statistics  1. Converged Network Adapter  7. Display iSCSI Port Statistics From the Converged Network Adapter (CNA) Statistics menu, select the Reset iSCSI Statistics opt...

11–NIC Partitioning (NPAR) Interactive CommandsSetting Up NIC Partitions 11-2 SN0054667-00 C Setting Up NIC Partitions To set up NIC partitions using the QCC CLI: 1. Start the QCC CLI interface and select option 6: NIC Partitioning <NPAR> Information ( Figure 11-1 ). Figure 11-1. Selecting Opt...

11–NIC Partitioning (NPAR) Interactive Commands Setting Up NIC Partitions SN0054667-00 C 11-3 The NPAR Configuration Selection Page displays the current configuration ( Figure 11-3 ). Figure 11-3. NPAR Configuration Selection Screen 3. Return to the main menu after viewing the NPAR information and s...

11–NIC Partitioning (NPAR) Interactive CommandsSetting Up NIC Partitions 11-4 SN0054667-00 C 4. Select option 1: NPAR Configuration to display the NPAR Configuration menu, which provides the following options: 1: Bandwidth Configuration2: Change PCI Function Personality 5. Configure the bandwidth se...

11–NIC Partitioning (NPAR) Interactive Commands Setting Up NIC Partitions SN0054667-00 C 11-5 f. Specify whether you want your bandwidth settings to persist across reboots ( Figure 11-6 ). Figure 11-6. Setting Bandwidth Changes to Persist 7. Return to the NIC Partitioning <NPAR> Configuration ...

11–NIC Partitioning (NPAR) Interactive CommandsSetting Up NIC Partitions 11-6 SN0054667-00 C 9. Figure 11-7 shows the CLI commands leading to the option for changing a function type on a Linux system. Figure 11-7. Selecting Function Type on Linux System 10. Return to the main menu and select option ...

A–NIC Partitioning (NPAR) OverviewWhat is NPAR? A-2 SN0054667-00 C What is NPAR? NIC Partitioning (NPAR) provides the ability to create multiple physical functions on the PCIe bus that share a single physical port. Each physical function is a PCI endpoint (PCIe) that can have a device driver attache...

A–NIC Partitioning (NPAR) Overview NIC Partitioning Options SN0054667-00 C A-3 By default, NPAR functionality is disabled on the adapters, having only two Ethernet functions enabled. Depending on the feature personality mapping supported on the adapter, you can enable additional Ethernet or storage ...

A–NIC Partitioning (NPAR) Overview Personality Changes SN0054667-00 C A-5 The following diagram ( Figure ) shows the possible configurations. Figure A-2. NPAR Configuration Options — Personalities Personality Changes Based on your operating environment, you can use your preferred management tool to ...

A–NIC Partitioning (NPAR) OverviewQuality of Service A-6 SN0054667-00 C . Quality of Service Quality of Service (QoS) refers to the bandwidth allocation assigned to each partition used to send and receive data between the adapter port and connected devices. Each physical port on a QLogic adapter can...

A–NIC Partitioning (NPAR) Overview eSwitch SN0054667-00 C A-7 NPAR Quality of Service (QoS) allows NIC and iSCSI partitions to each allocate a minimum guaranteed portion of the available bandwidth. However, the user interface tools do not support setting the bandwidth limits for iSCSI partition. Thi...

A–NIC Partitioning (NPAR) OverviewNPAR Setup A-8 SN0054667-00 C NPAR Setup This section provides NPAR reference tables you can use when configuring NIC partitions using QConvergeConsole CLI. Default Settings Before configuring NIC partitions, the QLogic Adapter appears as a simple dual-port 10GbE ad...

A–NIC Partitioning (NPAR) Overview NPAR Configuration Parameters and Setup Tools SN0054667-00 C A-9 NPAR Configuration Parameters and Setup Tools The following table identifies parameters that QConvergeConsole can configure. b Maximum bandwidth: Maximum allowed bandwidth, specified as a percentage o...

SN0054667-00 C Glossary-1 Glossary adapter The board that interfaces between the host system and the target devices. Adapter is synonymous with host bus adapter (HBA) , host adapter , and a dapter board . adapter port A port on the adapter board. CLI Command line interface. A program inter-face driv...

User’s Guide QConvergeConsole CLI2400, 2500, 3200, 8100, 8200 Series Glossary-2 SN0054667-00 C eSwitch The eSwitch (embedded switch) function-ality provides a basic Layer-2 switch for Ethernet frames. Each physical port has one instance of an eSwitch, which supports all NIC partitions on that physic...

SN0054667-00 C Glossary-3 User’s Guide QConvergeConsole CLI 2400, 2500, 3200, 8100, 8200 Series Because a path is a combination of an adapter and a target port, it is distinct from another path if it is accessed through a different adapter or it is accessing a different target port. Consequently, wh...