Q-See QSW1001R - Manuals - manualsarea.com

Page 2 - BEFORE USING; Packing List

2 . BEFORE USING Special Attention 1. Connect all the parts before turning on the power. 2. Cut off the power before inserting or pulling out SD Card to avoid damage to the equipment. 3. Physical electrostatic discharge can damage the SD card permanently, so please don't touch the metal part of the ...

Page 3 - TECHNICAL SPECIFICATIONS; Product Model; PVR Layout

3 TECHNICAL SPECIFICATIONS Product Model QSW1001R Voltage DC 12V Power Consumption 300mA Standard memory 128MB SD Card Maximum memory 2GB SD Card Photo format JPEG Photo pixels 640*480 Video format AVI Video pixels 320 *240 Frames/Second 8fps Video record time 10s/pc Compression format Motion JPEG R...

Page 5 - The Connection Diagram.; Monitor; When the wired camera and wireless camera are on at the same time, it; Image setup; When you choose; Wired AV

5 The Connection Diagram. 1. Connect PVR video-in port and camera with video wire. A wireless camera will communicate with the wireless antenna 2. Connect video -out port and TV with video wire. 3. Please use special AC/DC Adapter or battery. 4. Please connect when power off. PIP (Picture in Picture...

Page 7 - Record AVI/Photo Setup; Press OK to switch photo option.; Photo/AVI quick setup; Pressing DOWN directly in the preview mode can switch the capture

7 Record AVI/Photo Setup (1) Press MENU to enter system main menu. (2) Press LEFT/RIGHT to capture format AVI/Photo option. (2) Press OK to switch photo option. (3) Press OK to switch record option.. Exit setup (1) Press LEFT/RIGHT to exit option and then press ok. (2) Press MENU to exit directly. P...

Page 9 - Image Quality Setup; (4) Press OK to switch to Low image quality mode; Exit Setup; Press MENU to exit directly.

9 Image Quality Setup (1) Press MENU to enter system main menu. (2) Press LEFT/RIGHT to setup option and then press OK to confirm. (3) Press LEFT/RIGHT to image quality setup option. (4) Press OK to switch to Low image quality mode （ default is High ） . (5) Press OK again to switch to High image qua...

Page 10 - Motion Detection ON/OFF; (4) Press OK again to enter motion detect off status; Motion Detection Quick Setup; Press UP Key to directly switch the motion detect state.

10 Motion Detection ON/OFF (1) Press MENU to enter system main menu. (4) Press LEFT/RIGHT to motion detect on/off option. (3) Press OK to enter motion detect on status. (4) Press OK again to enter motion detect off status Exit Setup (1) Press LEFT/RIGHT to exit option and then press OK. (2) Press ME...

Page 11 - Motion Detect Off; Press MENU to enter system main menu.

11 Motion Detect Off Motion Detection Area (1) Press MENU to enter system main menu. (2) Press LEFT/RIGHT to setup option, and then press OK to confirm. (3) Press LEFT/RIGHT to motion detect area option. (4) Press OK to motion detect area setup. (5) Press LEFT/RIGHT to choose detect area and then pr...

Page 12 - Motion Detection Count; Motion detection count means number of photos that you choose

12 (7) Press LEFT/RIGHT to exit the option and then press OK to return to the setup. Exit Setup Press MENU to exit directly. Motion Detection Count Motion detection count means number of photos that you choose to take in one motion detection (you can choose 1, 3, or 5 pictures). (1) Press MENU to en...

Page 13 - Exit setup

13 Exit setup Press MENU to exit directly. Motion Detection Interval Motion detection interval means that you can set 1, 3, or 5 second intervals between two motion detection events. (1) Press MENU to enter system main menu. (2) Press LEFT/RIGHT to setup option,and then press OK to confirm. (3) Pres...

Page 14 - Motion Detection Sensitivity

14 Exit Setup Press MENU to exit directly. Motion Detection Sensitivity The motion detection sensitivity range is 01-99. The lower the value, the lower the sensitivity is, the higher the value, the higher the sensitivity is. (1) Press MENU to enter system main menu. (2) Press LEFT/RIGHT to setup opt...

Page 15 - Image playback; The photos can be browsed by one or six thumbnails, or by folder. They; Playback Mode

15 (6) Press LEFT/RIGHT to exit option and then press OK return to setup. Exit Setup Press MENU to exit directly. For motion detection sensitivity refer to the following diagram. When it reaches the target value, the system would start to record automatically. The Motion detect sensitivity value set...

Page 16 - (1) Press MODE to playback interface in preview mode and the; Browse Six Pictures; (1) Press MODE to go to playback interface in preview mode.

16 (1) Press MODE to playback interface in preview mode and the current image information will be shown at the bottom of the screen. (2) Press MODE again to return to preview mode. Browsing Pictures Browse Six Pictures (1) Press MODE to go to playback interface in preview mode. (2) Press OK to go to...

Page 18 - Delete All; Format; Press MODE to go to playback interface in preview mode.

18 (1) Press MODE to go to playback interface in preview mode. (2) Press MENU to go to delete menu. (3) Press LEFT/RIGHT to select Delete One, and then press OK to confirm. (4) Press LEFT/RIGHT to select DELETE or NOT DELETE option, and then press OK to confirm. Delete All (1) Press MODE to go to pl...

Page 19 - Q-SEE Product Warranty; User’s Name

19 (2) Press MENU to go to delete menu. (3) Press LEFT/RIGHT to Format and then press OK to confirm. (4) Press LEFT/RIGHT to format or not format option, and then press OK to confirm. Q-SEE Product Warranty Thank you for choosing our products. All of our products have a conditional free warranty rep...