Q-See QSD2216 - Manuals - manualsarea.com

Page 3 - Strong recommendation on installation of the DVR unit; our electrical requirements.; Before reading this document

3 1. This document is intended for both the administrator and users of this stand alone DVR Model. 2.This manual contains information for configuring, managing and using this stand alone DVR Model. 3. To prevent fire or electrical shock, do not expose the product to heat or moisture. 4. Be sure to r...

Page 4 - CONTENTS

4 CONTENTS 1. FEATURES AND FUNCTION…………………………………………………………………….…..5 2. UNIT DESCRIPTION OF FRONT PANEL.…………………………………………………..……….6 3. REAR PANEL AND SYSTEM CONNECTION…..……………………………………………………8 4. REMOTE CONTROL…………………………………………………………………………………12 5. SYSTEM SETUP………………….………………………………………………..………………..12 5.1. S...

Page 5 - FEATURE AND FUNCTION

5 1. FEATURE AND FUNCTION l Video input: 16channels; Video output: 3channels. l Audio input: 4channels; Audio output: 2channels. l 16 alarm input and 1 relay alarm output. l Compression mode: M-JEPG. l Support network view. l Support USB backup. l Compatible with NTSC and PAL format. l Support zoom,...

Page 6 - UNIT DESCRIPTION OF FRONT PANEL; Recording/Playing Control Buttons Area; button doesn’t work in schedule mode.; Function Control Area

6 2. UNIT DESCRIPTION OF FRONT PANEL 2.1 Recording/Playing Control Buttons Area 1. REC : It is manual recording button. Press this button to record video to hard disk, Re-press this button, it will stop recording. So, this button is the switch button of manual recording and stopping recording operat...

Page 8 - Channel Choosing Control Area; REAR PANEL AND SYSTEM CONNECTION

8 11. SF/0: Single frame forward button, in shift mode, while in playback state, long press this button can see single frame forward, press play button to play normally. If not in shift mode, press this button to see big picture of channel 10.while inputting numbers, this button is used as number ke...

Page 9 - Back panel and connection terminals; Each part of the back panel is illustrated as below:; Video and Audio Connection; The DVR can support up to 16 cameras video input at the same time; Alarm Connection; The DVR can support up to 16-alarm input and 1 alarm output.

9 3.1 Back panel and connection terminals The power cable and input, output signal terminals are all at the back of the machine, the connection to monitor, camera etc equipments are all carried out through the terminals and s o c k e t s o n t h e b a c k p a n e l t h e b a c k v i ew of t h e m a ...

Page 10 - Before Alarm After Alarm; There is an example for alarm output connection

10 2. Open/Close output A: N.O. Normal open, close when triggered. DVR must set as low voltage alarm. B: N.C. Normal close, open when triggered. DVR must set as high voltage alarm. Please refer to the picture below, channel 2 to channel 16 are the same as channel 1. Alarm output: There are three ala...

Page 11 - Hard Disk Connection; There are processing to install the hard disk.

11 3.4 Hard Disk Connection There are processing to install the hard disk. Note: If the DVR comes with a HDD pre-installed then skip the following steps. 3. Open the top cover of the drawer. If you have another HDD, please jump that HDD to SLAVE, and open then machine, put the HDD to the HDD rack, a...

Page 12 - REMOTE CONTROLLER; one, and it can recur. The selected one will display in yellow color.

12 4. REMOTE CONTROLLER 0 – 9, 10+: Select the channel (Full screen) 2x2: 2x2 Screen Modes 3x3: 3x3 Screen Modes 4x4: 4x4 Screen Modes USB: USB Storage Backup AUTO: Auto Sequence Mode ZOOM: 2X Zoom FREEZE: Freeze DISPLAY: Hard Disk Information MENU/EXIT: System Setup SEARCH: Time Search, Event Searc...

Page 14 - LOCAL: Set the time display position

14 5.2 SYSTEM SETUP Press “ENTER” button to enter sub menu PLAY REPEAT: Set the Playback Repeat VIDEO SYSTEM: Set the NTSC/PAL BUZZER SOUND: Set the Buzzer On/Off 5 . 2.1 TIME/DATA SET Set the date and time. DATE: Set the date TIME: Set the time FORMAT: Set the time display format (USA, EURO and Asi...

Page 17 - update window will appear.

17 5.2.5 Firmware Update When the cursor moves to FIRMWARE UPDATE, please press enter button, and the firmware update window will appear. Update Method: There are two methods to update the DVR firmware, USB (for USB thumb drives) and Network (not support) USB update: create a new folder named “firmw...

Page 18 - Setup window will appear.

18 5.3 DISPLAY SETUP BOUND COLOR: Set the Color of Video Boundary (BLACK / WHITE / GRAY). BLANK COLOR: Set the Background Color of Loss Video (BLACK / W HITE). 5.3.1 CAMERA NAME SET When the cursor moves to Camera Name, please press the Enter button, the Camera Name Setup window will appear. Press t...

Page 21 - is 100F/SEC) when the resolution is in CIF mode; AUDIO CH SET; channel within these four channels in the Audio Select menu.

21 REC SPEED: the recording frame rate of the DVR, factory default setting is 30F/SEC under NTSC (25F/SEC under PAL). This means the DVR records the events at the speed of 30 shots of frames per second. The higher of the record frame rate, the more natural look will be displayed on the screen when y...

Page 22 - REC CH SET; To set the file package time in continuous time record mode

22 5.4.2 REC CH SET When the cursor moves to REC ch Set, please press enter button, the REC ch setup window will appear. This screen is different for CIF and FIELD modes . In FIELD mode, the window is illustrated as below, press UP and DOWN buttons to select channel and press LEFT or RIGHT button to...

Page 24 - exclusive MAC address, but remember that; you have only one chance to modify the MAC

24 5.5.2. MAC SET When the cursor moves to Mac Set then press the Enter button, the Mac Set window will appear. If you have more than one DVR in a local area network, you have to set each DVR to have an exclusive MAC address, but remember that you have only one chance to modify the MAC address , onc...

Page 25 - If users set it to off, the DVR will ignore the alarm input.; ) When surveying objects in 50-100 meters area; set motion detection sensitivity to high level.

25 ALARM ENABLE: alarm trigger switch, can be set to off, N.C(normal closed) or N.O(normal open). If users set it to off, the DVR will ignore the alarm input. MOTION ENABLE: Motion alarm switch, can be set to ON or OFF. If set to off, the DVR will ignore the motion alarm. MOTION LEVEL: motion sensit...

Page 29 - Quick User Guideline; Security Notice; Turn off the DVR

29 CHANNEL SEL: If you have a speed dome camera, select the channel which the camera is connected to. BAUD RATE: Changeable from 1200bps to 115200bps. The default value is 2400bps. DOME ADDR: The address of the speed dome camera, changeable from 0x00 to 0xff. PROTOCOL: The protocol of speed dome cam...

Page 33 - If you want to search from MASTER HDD to SLAVE HDD, press the; SERACH; press Enter button. Press the Menu button to exit.

33 If you want to search from MASTER HDD to SLAVE HDD, press the SERACH button, and then press Enter button. Press the Menu button to exit. 6.10 Record Search Move the cursor to the Record Search, press the Enter button, and the record search window will appear, which is illustrated as below. All re...

Page 36 - Information Display

36 6.14 Information Display In shift mode, press display button, the main information of the DVR will display on screen. HDD SIZE: the size of the hard disk HDD USED: the used space of the hard disk. HDD READ: current HDD address for playback OVERWRITE: overwrite time of the HDD NETW ORK IP: IP addr...

Page 38 - REMOTE CONTROLLER; USING THE NETWORK VIEWER

38 6.16 REMOTE CONTROLLER 7. USING THE NETWORK VIEWER Using the net viewer software, you can view the DVR through Internet or Intranet, also, you can view and backup the video data on the HDD through a computer. Open the software; you will see the window below: REC: Start or stop recording SCHEDULE:...

Page 41 - and select one HDD, then you can play all the video on the HDD.

41 7.5 Scandisk Connect the HDD that used in the DVR to a PC and then select Scandisk, Scandisk window will displa y, click and select one HDD, then you can play all the video on the HDD. <Scandisk Menu> 7.6 File Play Press “FilePlay” button, you can see the below picture, press the “open” but...

Page 42 - to start the AVI sav e.

42 7.7 Save to AVI To record the video to your PC’s HDD with “.avi” file system, just click" AVI" button, and the following window will pop-up Here, select the record channel and click "+" icon to define the file name and sav e path and click "ok" to start the AVI sav e. Re-p...

Page 45 - Trouble shooting guide

45 9. Trouble shooting guide Q . What kind of camera should I buy for this DVR? A . Any BNC or RCA interface indoor/outdoor/infrared camera will work with the DVR. It doesn’t matter whether it’s a color or black/white camera. Howev er, web cameras that require a USB interface are not compatible with...

Page 47 - Record Time Table; Picture quality

47 Q . How do I change the On Screen Display (OSD) language on the DVR? A . You can change the OSD language from the default English to German, French, Italian, Polish, or Spanish by following the steps below. To change the OSD language, enter the menu system by pressing the MENU button on the front...

Page 48 - Internet View/Playback Configurations; About Networks; computer or device that the connection is intending to reach.; Network Configurations

48 11. Internet View/Playback Configurations 11.1 About Networks Users will generally use the following network types and hardware: 1): Local Area Network (LAN): An internal network usually operated via a hub, a switch, or a router and will usually operate within an office or household via wireless ...

Page 50 - cov ering operation of your Firewall.

50 As ADSL and CABLE MODEM network users usually use dynamic IP address, so once the MODEM restarts, the IP addresses will change. For this situation, users should apply for DNS services. To use the Swann DVRs with remote viewing capabilities you may have to “open“ ports on your Windows® Firewall, y...

Page 51 - Q-SEE Product Warranty

51 Q-SEE Product Warranty Thank you for choosing our products. All of our products users have a conditional free warranty repair service for hardware within 12 months starting from purchase date, and a free exchange service within one month (valid for manufacturing defects). Permanent upgrading serv...