Pyle PTA1 - Manuals

FUSE FUSE 3 CARING FOR YOUR PYLE PRO AMPLIFIER Your Pyle Pro Amplifier is an example of superior design and craftsmanship. The following suggestions will help you care for your amplifier so you can enjoy years of use :*Keep the amplifier dry. If it gets wet, wipe immediately. *Use the amplifier only...

4 The fuse might be blown. Sound source or speakers not connected properly. MUSIC volume control set to minimum. The speaker's wire might be the wrong impedance. The amplifier might has shut down. Microphone or speakers are too close together. Check the amplifier's fuse and replace it if necessary. ...

5 Limited warranty All PYLE PRO products are carefully constructed and tested before shipment. Units purchased in the USA are warranted to be free of defects in material and workmanship for one (1) year from the date of purchase. This warranty is limited to the original retall purchaser of the ampli...

6 SPECIFICATIONS Output power, 2 channels driven4-OHM, 1 KHz, 1% THD.4-OHM, 1 KHz, 10% THD.Peak Power Total Harmonic Distortion, 1 KHz Rated Power Input Sensitivity, 1 KHz ,4-ohm Rated PowerAUX CDMIC Signal to Noise Ratio, 1 KHz, 4-ohm Rated PowerAUXCDMIC Frequency Response, 1KHz 1W, +/-3dB (8-OHM) ...