Pyle PLCD29 - Manuals - manualsarea.com

Page 2 - CONTENTS

2 Installation ............................................................................................... 3 DIN Front-Mount (Method A) ........................................................................... 3 Installing the unit .................................................................

Page 3 - Installing the unit; INSTALLATION

3 Notes: • Choose the mounting location where the unit will not interfere with the normal driving function of the driver. • Before finally installing the unit, connect the wiring temporarily and make sure it is all connected up properly and the unit and the system work properly. • Use only the parts...

Page 4 - Removing the unit; Select a position where the screw

4 Removing the unit 1. Frame2. Insert fingers into the groove in the front of frame and pull out to remove the frame. (When reattaching the frame, point the side with a groove downwards and attach it.) 3. Lever Insert the levers supplied with the unitinto the grooves at both sides of theunit as show...

Page 5 - USING THE DETACHABLE FRONT PANEL; To Reinstall the Front Panel

USING THE DETACHABLE FRONT PANEL 5 To Reinstall the Front Panel 1. Push the front panel into the main body. A ‘click’ sound should be heard. 2. Note that if the front panel fails to lock in position properly, press control button may not function and LCD display may be missing some segments. Pressin...

Page 6 - WIRING CONNECTION; unconnected and isolated.

6 WIRING CONNECTION Note:1. For 2-speakers system, green, violet, white/black and grey/black wire leads are unconnected and isolated. 2. For 2-speakers system, keep the fader indicator at center position to maintain the existing volume level. WHITE WHITE/BLACK GREEN GREEN/BLACK Lch SPK. WHITE GREEN/...

Page 7 - OPERATION; GENERAL OPERATION

7 OPERATION GENERAL OPERATION • ON/OFF Press the PWR button (1) to turn on. Press PWR again to turn it off. • MUTE Press the MUT button (3) to silence the receiver. Press again to resume listening. • FACEPLATE RELEASE Press REL button (5) to detach the removable faceplate. • LOUDNESS Press LOU butto...

Page 8 - RADIO OPERATION

Use VOLUME (10) and VOLUME (11) buttons to adjust the selected mode. When mode has not been adjusted for several seconds, display returns to normal radio or CD display. • SELECT LISTENING MODE Press MOD button (13) to choose desired listening mode.(e.g. radio mode to CD mode to AUX IN mode) • LIQUID...

Page 9 - CD OPERATION

9 CD OPERATION • DISC PLAY Push a compact disc with the label side facing up into the disc slot (2). When there have correspondingly showing on the display, press button (19) to start playing with the firsttrack of the disc. The digital display will indicate the track number and playing time.During ...

Page 10 - FM; SPECIFICATION

10 GENERAL P ower Supply Requirements : DC 12 Volts, Negative Ground Chassis Dimensions : 178 (W) x 155 (D) x 50 (H) Tone Controls- Bass (at 100 Hz) : + 10 dB / – 10 dB - Treble (at 10 KHz) : + 10 dB / – 10 dB Maximum Output P ower : 4 x 40 Watts (max.) Current Drain : 5 Ampere (max.) CD PLA YER Sig...

Page 11 - TROUBLE SHOOTING; Symptom

11 TROUBLE SHOOTING Before going through the check list, check wiring connection. If any of the problemspersist after check list has been made, consult your nearest service dealer. Symptom Cause Solution No power. The car ignition switch is If the power supply is properly not on. connected to the ca...