Presto WPS - Manuals - manualsarea.com

Page 3 - CONTENTS

2 CONTENTS Page Section Number SECTION 1 : Introduction ................................................................................................. 3 SECTION 2 : Safety ........................................................................................................... 3 SECTION 3 : Ins...

Page 4 - S E C T I O N 1; INTRODUCTION; S E C T I O N 2; SAFETY; S E C T I O N 3; INSTALLATION; INSPECTION

3 S E C T I O N 1 INTRODUCTION This manual attempts to provide all of the information necessary for the safe and proper installation, operation and maintenance of Presto’s Battery Operated Work Positioner. It is important that all personnel involved with the installation, maintenance or operation of...

Page 5 - REMOVING FROM PALLET:; S E C T I O N 4; OPERATION

4 • Check for signs of damage especially to the back cabinet that houses the battery, electrical/hydraulic power pack. • Check all connections for tightness. Is there hydraulic fluid visible? • Check base frame for dimensions and structural integrity. • Inspect for any bent or damaged metal parts. B...

Page 6 - S E C T I O N 5

5 B. DAILY OPERATIONS MAINTENANCE CHECKS: 1. Battery A. Check for corroded and loose terminals. A white powder substance will be present if there is any existing corrosion. B. Check for loose battery tie-downs. C. Visually inspect for any cracks or damage to the casing. 2. Charger A. Inspect wire co...

Page 7 - S E C T I O N 6; SERVICE

6 B. Clean battery compartment area. C. Check specific gravity -- fully charged battery should read 1265. D. Check fluid level in all cells. Fill with distilled water as necessary to bring fluid to within ¾” of the top. 2. Hydraulic System A. Clean and inspect hydraulic cylinder. B. Lubricate chains...

Page 10 - Figure 5: Floor Lock Assembly; Chain Roller Assemblies

9 Figure 5: Floor Lock Assembly Floor Lock Assembly Detail Item Description 1 0574 – Handle, Lock 2 N0180 – Nut, Lock Handle 3 C108 – Spacer 4 N1110 – Bolt, Lock Handle 5 PSL28A – Rings, Retaining 6 PSL28 – Pin 7 PSL25 – Lever, Lock 8 N0180 – Nut, Locking 9 PSL22 – Stud, Adjusting 10 PSL24 – Mount, ...

Page 13 - XX = Lift Chain

12 Item# P/N# Description Qty. 1-A 1009-003-02A Back plate and fork assembly 42” forks (forks not shown) 1 -B 1009-003-04A Back plate and fork assembly 48” forks (forks not shown) 1 2-A 1009-003-02 Back plate and fork assembly 42” forks (forks not shown) 1 2-B 1009-003-04 Back plate and fork assembl...

Page 17 - Table; Old Style Replacement Parts*; Description

16 Table 3: Old Style Replacement Parts* Description Part Number Used On Power Pack: A completely assembled DC motor, pump and reservoir with manual control. Call Lee Engineering for part numbers if a Remote Control Power Pack is needed. B200-1000 B200-2000 B200-3000 B200-4000 All 1000 lb. capacity ...

Page 19 - Three or less; Four or more; PARTS

18 RESTOCKING POLICY Presto Lift, Inc.’s goal is for you to be satisfied with your order. Merchandise may be returned, but returns will be subject to a restocking fee to cover the costs Presto Lift, Inc. incurs which include but are not limited to handling, storage of the units, etc. Presto Lift, In...

Page 20 - RETURN MATERIALS AUTHORIZATION

19 RETURN MATERIALS AUTHORIZATION (RMA) PROCEDURES Although Presto Lift, Inc. is not legally obligated to issue a credit for any merchandise, the RETURN MATERIALS AUTHORIZATION (RMA) PROCEDURE is provided as a courtesy to our customers in the event they do not receive what they wanted. If a customer...

Page 21 - Presto Lifts Limited Warranty Policy

20 Presto Lifts Limited Warranty Policy Presto Lifts warrants all of its products against defects in the welded structural frame and, if applicable, scissor legs from faulty material and workmanship for a period of five (5) years from the date of invoice. A lifetime limited warranty is provided for ...