Premier Mounts PWM-503 - Manuals

- 5 - o Phillips screwdriver o Drill gun o Soft material or a blanket o Pencil o ¼" drill bit o Level o Measuring tape o Wrench with a 1/2" socket o Stud finder o PCA-1 – 4.5" Ceiling adapter mates directly to the PSB-TBP tilt back plate o PSA-1 – Height adjustable ceiling adapter adjust...

- 6 - Step 1 CAUTION : The plasma displays are fragile and heavy. At least two (2) qualified personnel are strongly recommended for the installation of this product. Invert the plasma display and set it on a flat and soft material such as (blankets, foam, cloth etc.) to prevent any damage to the pla...

- 7 - floor floor 16" Step 3 Select the area where the plasma will be installed and make sure it can support the weight standards (see warning on page 3). Locate the 16" wood stud centers behind the wall using a (commercially available) stud finder and mark the center of the studs when found...

- 8 - floor floor To determine the desired viewing height, use the center slot opening in the wall mount as a center reference for the plasma television when mounted. Once the height is determined, use the bubble level to insure that the bracket is level. Next, using a pencil, mark the six (6) lag b...

- 9 - floor floor Securing the mount Step 5 Warning : The plasma display is heavy and 2 people are needed to lift and install it. Failure to do so could result in serious personal injury. Before placing the plasma on the wall recheck all hardware for proper tightness and security. Before installing,...