Premier Mounts PDS-PLUS - Manuals

PDS-PLUS Installation Manual Page - 5 - Installation Tools t e k n a l B / l a ir e t a M t f o S l li r D e l b a tr o P e r u s a e M e p a T l i c n e P ) d e il p p u S ( h c n e r W n e ll A y ti r u c e S 5 M r e d d a L Phillips Head Screw Driver M3 Security Allen Wrench (Supplied) 1/8” Drill...

PDS-PLUS Page - 6 - Installation Manual Optional Mounting Configurations This section will contain different configurations, if applicable, that the PDS-PLUS can be used with. The CLS adapter will be used in conjunction with the PP-FCTA and the PP-FCMA. Please refer the Installation Instructions tha...

PDS-PLUS Installation Instructions Page - 7 - Ceiling Installation – Pipe Unpack the PDS-PLUS Mount and familiarize yourself with the components. Please take time before you install the PDS-PLUS to determine the location of where the PDS-PLUS will be mounted. The PDS-PLUS may be attached to 1-1/2” s...

PDS-PLUS Page - 8 - Installation Instructions Ceiling Installation – Solid Surface 1. Separate the Upper Bridge from the Base Box by removing the six (6) M6 x 12mm Phillips head screws (three on each side). 2. Use the appropriate slot openings for single wood stud mounting, depending on your ceiling...

PDS-PLUS Installation Instructions Page - 9 - 4. Attach the base box to the upper bridge and secure with the six (6) M6 x 12mm Phillips Head screws (above). DO NOT OVERTIGHTEN THESE SCREWS AT THIS TIME. Concrete Mounting The PDS-PLUS can be mounted to a ceiling with a minimum 6” thickness. Concrete ...

PDS-PLUS Page - 10 - Installation Manual Attaching the PDS-PLUS to the Projector To truly show the versatility of the PDS-PLUS, the following pictures will show a variety of configurations that can be achieved with the PDS-PLUS. Your individual application will depend on the purchased projector. To ...

PDS-PLUS Installation Manual Page - 11 - Depending on your application, the long mounting legs and the short mounting legs may be used together. There are multiple configurations that may be used combining the long mounting legs with the short mounting legs. 2. Attach the appropriate number of mount...

PDS-PLUS Installation Manual Page - 12 - Single Mounting Point Installation If your projector has only one mounting point, a ¼-20 x 5/16” screw must be used to attach the mount to the projector. Please refer to the following three steps: 1. Determine where the mounting point is located. 2. Place the...

PDS-PLUS Installation Manual Page - 14 - 4. Place the nylon spacer over the hinge pin. 5. Secure the PDS-PLUS to the PDS Base Box with two (2) M6 x 12mm Phillips Head screws w/Integrated Washers (one on each side). If using the optional Lock-It™ Security Hardware Pack, secure the PDS-PLUS to the PDS...

PDS-PLUS Page - 15 - Installation Manual 6. Once the mount is safely attached, insert and tighten the four (4) M6 x 12mm Phillips Head Screw w/ Integrated Washers. 7. Make all final adjustments at this time. Base Box Adjustment Roll Tilt 1. You can adjust the roll of the projector by loosening the t...

PDS-PLUS Installation Manual Page - 16 - Technical Specifications All measurements are inches (mm).

PDS-PLUS Page - 17 - Installation Manual Warranty PREMIER MOUNTS LIMITED LIFETIME WARRANTY What and Who is Covered by this Limited Warranty and for How Long Premier Mounts warrants this product to be free from defects in material and workmanship for the lifetime of the original owner of this product...