Premier Mounts LPFM1532 - Manuals

Page 2 - Warning Statements

Page 2 Installation Instructions Table of Contents Warning Statements LPFM1532 PRIOR TO THE INSTALLATION OF THIS PRODUCT, THE INSTALLATION INSTRUCTIONS SHOULD BE READ AND COMPLETELY UNDERSTOOD. THE INSTALLATION INSTRUCTIONS MUST BE READ TO PREVENT PERSONAL INJURY AND PROPERTY DAMAGE. KEEP THESE INST...

Page 3 - Parts List; Phillips Screwdriver

Installation Instructions Page 3 Parts List Congratulations on the purchase of your new Premier Mounts LPFM1532 flat panel mount. This mount is shipped with all proper installation hardware and components. Make sure that none of these parts are missing and/or damaged before beginning installation. I...

Page 4 - Wood Stud Installation; Visual Centering Diamond -

Page 4 Installation Instructions Step 3. Use an electronic studfinder to locate the stud. Step 4 . Align the plate to the stud and visually verify the flat panel placement now that the stud has been located. Step 5. Once the center of the stud has been located, mark the wall at the two (2) screw hol...

Page 5 - Concrete Surface Installation; Screwdriver; Solid Surfac; Pilot Hole

Installation Instructions Page 5 Concrete Surface Installation Screwdriver #10 x 1-1/4” Screw #10 Anchor Pilot Hole 1/8” Bit Step 1 . Use the visual centering diamond to help determine the placement of the back plate. Step 2 . Once the mounting placement has been determined, use a pencil to mark the...

Page 6 - Universal Spacers Installation; Compare and verify the depth of the remaining thread inserts.; You may not need to use any spacers for your particular flat panel.

Page 6 Installation Instructions LPFM1532 Universal Spacers Installation Determining the Mounting Hardware Step 1. Insert the thread depth indicator (supplied) through the thread inserts found on the back of the flat panel. Step 2. Using a pencil, mark the depth of the thread insert on the thread de...

Page 7 - Cover Plate Installation

Installation Instructions Page 7 LPFM1532 Step 1. Secure the cover plate to the flat panel using four (4) Phillip screws (supplied). Step 2. The slotted opening must be facing up and the flat surface touching the flat panel surface. Recessed VESA 75mm/100mm Pattern Mounting Hardware Cover Plate Secu...

Page 8 - M6 x 8mm screws. Tighten using a; Cover Plate Installation with Adapter Plates Attached (Optional)

Page 8 Installation Instructions LPFM1532 Step 2. Insert four (4; two on each side) M6 x 8mm screws. Tighten using a long Phillips head screwdriver. Phillips Head Screwdriver Cover Plate Installation with Adapter Plates Attached (Optional) Mounting Hardware Stacked Universal Spacers Mounting Hardwar...

Page 9 - Flat Panel Installation

Installation Instructions Page 9 LPFM1532 200 x 100 Installation Mounting Hardware LPFM1532 Stacked Universal Spacers Mounting Hardware Flat Panel Installation Solid Surfac e Cinder Block Step 1. Lower the flat panel onto the wall plate so that the mounting tab is inserted into the mounting slot. Mo...

Page 10 - Technical Specifications; M4 x 10mm Phillips

Page 10 Installation Instructions LPFM1532 Technical Specifications All measurements are in inches [mm]. Please refer to the hardware pack that is included with the LPFM1532 to determine the correct mounting hardware for your application. NOTE: A. 200 X 100 VESA Pattern M4 x 10mm Phillips Flat Head ...