Precor CW34870-101 - Manuals

Experience Strength™ C-Line Owner’s Manual: Before You Begin 4 Before You Begin Precor recommends implementing a thorough maintenance program that incorporates regular safety inspections by qualified maintenance technicians as outlined in this manual. This manual explains how to maintain the Precor ...

Experience Strength™ C-Line Owner’s Manual: Before You Begin 5 Shroud Removal The Experience Strength product line includes a shroud that must be removed to perform the maintenance described in this manual. Important: Do not remove the shroud while the equipment is in use. Use the following instruct...

Experience Strength™ C-Line Owner’s Manual: Daily Inspection 7 Daily Inspection You will need to perform the following tasks each day to maintain the equipment and keep it operating smoothly: • Clean any upholstery on the equipment. • Inspect pads for wear. • Clean and inspect equipment frames. • In...

Experience Strength™ C-Line Owner’s Manual: Daily Inspection 8 Inspect Cables and End Connections CAUTION: Carefully inspect the cables, pulleys, fasteners, and related hardware regularly. Replace any cable at the first sign of wear using only Precor-supplied replacement parts. With regular use, a c...

Experience Strength™ C-Line Owner’s Manual: Daily Inspection 9 Figure 3: Cable bolt must have a minimum of ten threads into the selector stem Check Warning and Instructional Labels Inspect warning and instructional labels daily to make sure that all the information can be clearly read. If any portio...

Experience Strength™ C-Line Owner’s Manual: Daily Inspection 10 Precor products come equipped with a number of standard warning labels. The following two figures show sample warning labels you may see on the equipment depending on the model and product line: Figure 5: A warning label may appear on o...

Experience Strength™ C-Line Owner’s Manual: Weekly Inspection 11 Weekly Inspection This section covers the tasks you should perform each week to maintain the equipment. Perform the following tasks as appropriate for the unit you are maintaining: • Condition and deep clean upholstery. • Clean and lub...

Experience Strength™ C-Line Owner’s Manual: Weekly Inspection 12 Clean and Lubricate Guide Rods Inspect the exposed areas of the guide rods for cleanliness. Using a dry cloth, wipe any buildup of dirt or grease from the rods. Note: On the Experience Line of strength equipment, the upper rear shroud ...

Experience Strength™ C-Line Owner’s Manual: Weekly Inspection 13 Inspect Pulleys Precor uses precision ball bearing idler pulleys to guide the cable smoothly. Inspect each pulley for damage, including hairline cracks, chips, or missing sections. Worn surfaces in the pulleys can cause severe damage t...

Experience Strength™ C-Line Owner’s Manual: Weekly Inspection 14 • Linear Bearings: These bearings allow weight plates and other mechanical parts to travel smoothly along guide rods. (Refer to the following figure.) Inspect the ends of each guide rod to make sure they are fastened correctly and all ...

Experience Strength™ C-Line Owner’s Manual: Monthly Inspection 15 Monthly Inspection This section covers the tasks you should perform each month to maintain the equipment. Perform the following tasks as appropriate for the unit you are maintaining: • Inspect frames and movement arms. • Lubricate pop...

Experience Strength™ C-Line Owner’s Manual: Monthly Inspection 16 Lubricate Pop Pins Pull out the pop pin as far as it goes and apply a small amount of silicone spray lubricant. Wipe off any excess lubricant with a cloth. (Refer to the following figure.) CAUTION: Pulling out the pop pin may cause th...

Experience Strength™ C-Line Owner’s Manual: Annual Maintenance 17 Annual Maintenance Perform these tasks on an annual basis, as appropriate for your equipment. Weight Stack Annual Maintenance Once a year, Precor recommends disassembling the weight stack to clean and inspect it thoroughly. • Carefull...

Experience Strength™ C-Line Owner’s Manual: Commercial Strength Equipment Limited Warranty 18 Commercial Strength Equipment Limited Warranty PLEASE READ THESE WARRANTY TERMS AND CONDITIONS CAREFULLY BEFORE USING YOUR PRECOR INCORPORATED PRODUCT. BY USING THE EQUIPMENT, YOU ARE CONSENTING TO BE BOUND...

Getting Started Note: Assemble the weight stack shroud and bottle holder/accessory tray after the equipment is positioned in the facility. Assembly takes about 15 minutes to complete. If this is the first time you have assembled this type of equipment, allow more time. Open the Box Open the box and ...

Attach the Feet and Foot Covers To Attach the Adjustable Foot: 1. Align the adjustable foot with the hole built into the cylindrical leg. 2. Screw the adjustable foot into the leg until the machine sits level on the floor. Caution: To prevent damage to the adjustable foot, screw it all the way into ...

To Attach the Foot Covers: Note: When you install each foot cover, no gap should appear between its front and back halves. Also, the opening in the top of the assembled foot cover should align with the angle of the frame leg attached to the foot. 1. Position the foot covers on either side of the equ...

To Adjust the Stability Foot: The stability foot is located centrally underneath the weight stack frame and should rest evenly on the floor. If the foot is not resting firmly on the floor, perform the following procedure. Note: Adjustments to the stability foot must be completed before the shroud is...

Attach the Bottle Holder/Accessory Tray To Attach the Bottle Holder/Accessory Tray to the Weight Tower Frame: 1. Locate the bottle holder and accessory tray. Snap the two pieces together and set them aside. Note: The bottle holder/accessory tray attaches to the side of the back weight tower upright....

Assemble the Shroud Before Beginning the Assembly All cables should be correctly seated and tensioned. Make any adjustments before you install the shroud assembly. Caution: Do not overtighten fasteners. Do not use power tools to tighten screws attaching the weight stack shroud components. Using powe...

3. Slide the bottom edge of the front shroud into the space between the exercise station and the weight stack frame. 4. When the plastic hooks on the front shroud line up with the large square holes at the top of the weight stack frame, place the hooks into the holes. A second set of hooks halfway u...

To Install the Upper and Lower Back Shroud: 1. Position the lower back so that its tabbed end is at the top. Note: Do not tighten any of the screws until all four screws are attached. 2. Line up the two screw holes near the upper corners of the lower back with the corresponding holes in the weight s...

Lat Pulldown Assembly and Delivery Guide: Assemble the Shroud 11 7. Insert the tabs in the top corners of the upper back into the square holes at the top of the weight stack frame and push the corners in until the tabs lock into place. To Install the Top Cover: 1. Insert the tabs on the top cover in...

Disassemble the Equipment This unit arrives fully assembled except for the shrouds and the bottle holder/accessory tray. In some cases, you may need to disassemble the unit before you move it. WARNING: You will need assistance to disassemble this unit. The weight tower is unstable when disconnected ...

To Reroute the Cable During Reassembly: 1. Check the position of the cable on the movement arm cam and all pulleys to ensure that they are properly seated. Note: To prevent cable damage in the following step, the cable must be inside the hook and must rest in the central grooves of the pulleys. 2. R...