Powermatic JTG-10Q - Manuals

7 Assembly Refer to Figure 1. 1. Insert the handwheel assembly (F) into the clamp bracket (B) and secure with the lock handle (A) on the clamp bracket. 2. Attach the clamp bracket (B) to the back of the fence (G) using two M10 x 25 socket head cap screws (D) and M10 lock washers (E ). 3. Attach the ...

9 10. To prevent the fence from being pushed, or moved, into the blade, loosen the nut (N) on the setscrew and turn the setscrew clockwise until it bottoms out (Figure 6). Tighten down the nut. 11. For a final adjustment, loosen screw (P) holding the pointer and adjust pointer to the 1/8" positi...

10 6. If it is necessary to cut a tenon on the side of the workpiece that is against the fence, a wood spacer must be secured between the workpiece and the fence, as shown in Figure 9. This will keep the saw blade from hitting the fence. Note: There are four holes in the fence for mounting a wood bl...

11 Parts List Index No. Part No. Description Size Qty 1 ............... JTG10-1 ................... Locking Lever....................................................... M6x22 ......................... 2 2 ............... TS-0680021 ............. Flat Washer .............................................