Power Acoustik PTID-3600T - Manuals

Power Acoustik PTID-3600T – Manual in PDF format online.

Manuals:

Manual

Manual Power Acoustik PTID-3600T

Summary

Page 2 - Table of Contents

Page - 1 Table of Contents Table of Contents.......................................................................................................................1 Important Safeguards.................................................................................................................2 ...

Page 3 - Important Safeguards

Page - 2 Important Safeguards z Using the device at temperature below -10 may cause the breakage of the device. BEFORE ℃ USING PLEASE HEAT UP THE PASSENGER COMPARTMENT TO THE RECOMMENDED TEMPERATURE! z Read carefully through this manual to familiarize yourself with this high-quality sound system. z ...

Page 5 - Installation

Page - 4 Installation/Un-Installation First complete the electrical connections, and then check them for correctness. Installation This unit can be installed in any dashboard having an opening as shown on the picture. The dashboard should be 4.75 – 5.56 mm thick in order to be able to support the un...

Page 6 - Do not; Using the ISO Connector; Location Function; Connector A

Page - 5 Wiring Connections Make sure you have good chassis ground. A good ground connection will eliminate most electrical noise problems. A good chassis ground requires a tight connection to the vehicle’s metal chassis. The area around the ground connection should be clean, bare metal without rust...

Page 7 - Detachable Control Panel; Detaching the control panel; Turn the Power off.; Attaching the control panel; Insert the left side of the control panel into the main unit.

Page - 6 Detachable Control Panel Detaching the control panel z Turn the Power off. z Press OPEN button release the panel. z Pull the panel out. Attaching the control panel z Insert the left side of the control panel into the main unit. z Press the control panel right side until the “click” sound is...

Page 8 - Card slot

Page - 7 Panel Controls Front panel 1. AUX IN 2. POWER/ MUTE 3. IR sensor 4. AS/PS 5. SEL 6. VOL + 7. PLAY/PAUSE 8. MENU 9. TFT display 10. OPEN 11. MODE 12. PREVIOUS 13. VOL 14. OK 15. NEXT 16. BAND 17. USB 18. Memory Card slot 19. EJECT button 20. Disc slot 21. RESET 22. Flashing LED

Page 9 - REPLACING THE BATTERY

Page - 8 IR Remote Control REPLACING THE BATTERY Remote Control comes with a CR-2025 Lithium Battery included. 1. Remove the Battery Holder from the back of the Remote Control. 2. Insert a CR-2025 Lithium battery with the positive (+) mark upward. Insert the Battery Holder into the back of the Remot...

Page 10 - General Operations; Reset the Unit; press to move cursor; OK button; long press to select the audio; MUTE Function

Page - 9 Do not re-charge, short, disassemble or heat the battery or dispose it in fire. Do not expose or bring into contact the battery with other metallic materials. Doing this may cause the battery to give off heat, crack or start a fire. When throwing away or saving the battery, wrap it in tape ...

Page 11 - AUDIO MENU

Page - 10 Audio Setting Press SEL button on the Remote Control to select the audio setting (or on front panel, long press SEL button in radio mode, short press SEL button in other mode to select the audio setting) BASS =>TREBLE => BALANCE => FADER => EQ. Press / buttons on remote to sele...

Page 12 - Driver Safety Function

Page - 11 z PICTURE MENU MENU DESCRIPTION RED Adjust level of red color. Support 50 levels. Default level is 25. GREEN Adjust level of green color. Support 50 levels. Default level is 25 BLUE Adjust level of blue color. Support 50 levels. Default level is 25. BRIGHTNESS Adjust level of screen bright...

Page 13 - Digital Tuner; Band selection; Play preset station:; Memory Card/ USB Operations; USB Flash Memory

Page - 12 Digital Tuner Note: Memory Card / USB service availability varies with areas. Please understand if Memory Card /USB service is not available in your area, the following service is not available, either. Band selection Press MODE button to select the RADIO mode. Press the BAND button to sel...

Page 14 - Memory CARD; button to play the; GOTO Function; Press the; Repeat

Page - 13 Memory CARD To play MP3/ MP4/ WMA files on a Memory CARD, insert the card into the card slot (you should press the OPEN button on the panel to flip down front panel and insert the card into card slot.) The unit will start playing MP3/ MP4/ WMA files on the Memory card memory automatically....

Page 16 - Discs operations; Glossary

Page - 15 Discs operations Glossary PBC (Play Back Control) Play Back Control is a menu recorded on the disc with SVCD or VCD2.0 format. For the discs contained PBC, it can playback interactive software with the menu displayed on TV. And if the disc contains still images, it can playback high defini...

Page 17 - Speed forward and backward; Note

Page-16 Loading a disc 1. Turn the power on. 2. Press the Open button on the front panel to flip it down. 3. Insert the disc with the printed side facing upward into the slot. The panel will be closed automatically. The DVD mode will be turned on automatically. The monitor will show the disc content...

Page 18 - Selecting different audio modes

Page - 17 Repeat A-B function 1. During playback, press A-B button on the remote control at the starting point of the section you want to repeat (point A). 2. Press A-B button again at the ending point of the section you want to repeat (point B). Section A-B repeating starts. 3. Press A-B button aga...

Page 19 - MP3 overview

Page-18 Changing the subtitle language (for DVD only) Press SUBTITLE button on the RC to select the preferred language for the disc menu. When the selected language is recorded on the disc then this language will automatically be selected. If not, the first language recorded on the disc is displayed...

Page 20 - Select this menu item to set the storage number.; System; TV cannot be displayed on the additional monitor.

Page - 19 z You should not write non-MP3 files or unneeded folders along with MP3 files on the disc otherwise it takes a long time until the unit starts to play MP3 files. z With some CD-R or CD-RW media, data may not be properly written depending on its manufacturing quality. In this case, data may...

Page 21 - Press SETUP button to enter the system settings main menu; System Setup; TV system

Page-20 Compatible Files 1. Audio files: MP3, WMA 2. Video files: MPEG4 TM1 3.11, 4X, 5X and 6X versions Nero Digital TM2 Real time MPEG2 MP@ML display Real time MPEG1 D1 (720X480X30/ 720X576X25) decoding Setup Menu • Press SETUP button to enter the system settings main menu; • Press cursor / button...

Page 22 - Language Setup; Key

Page - 21 Commonly used rating codes: Code Description None Kid safe G General Audiences - All ages admitted PG PARENTAL GUIDANCE SUGGESTED - Some material may not be suitable for children PG-13 PARENTS STRONGLY CAUTIONED - Some material may be inappropriate for children under 13 PG-R Restricted, un...

Page 23 - Digital setup; Remove the panel

Page-22 Video Setup: Brightness With this menu item you can set up the brightness of the image. Contrast With this menu item you can set up the contrast of the image. Hue With this menu item you can set up the hue. Saturation With this menu item you can set up the color saturation. Sharpness With th...

Page 24 - Note on Discs; Only use groundless loudspeakers.

Page - 23 Note on Discs Only use groundless loudspeakers. Use only loudspeakers of minimal 40Watt, using fewer watts may result in damaging your loud speakers at higher volumes. Use 4~8 Ω (Ohm impedance) loudspeakers only; using higher or lesser impedance may damage the unit. Do not use 3-ca...

Page 25 - Troubleshooting Guide; Symptom

Page-24 Troubleshooting Guide Symptom Cause Solution General No power The car ignition is not on. The fuse is blown. If the power supply is properly connected to the car accessory switch the ignition key to “ACC”. Replace the fuse. Disc Disc cannot be loaded. Presence of disc inside the player Remov...