Polaroid FLU-1514SA - Manuals

Polaroid FLU-1514SA – Manual in PDF format online.

Manuals:

Manual

Manual Polaroid FLU-1514SA

Summary

Page 2 - Table Of Contents; Product Features

1 Table Of Contents Important Safety Instructions------------------------------------------------ Product Features ---------------------------------------------------------------- Front Panel------------------------------------------------------------------------- Rear Panel-------------------------...

Page 3 - Important Safety Instructions

- 2 - Important Safety Instructions CAUTION 1. In order to ensure the safety of the product, do not remove any cover and attempt to repair the unit. If any service is needed, please contact the distributor or its authorized service center. 2. To reduce the risk of electric shock, do not remove the c...

Page 4 - Copyright Protection

- 3 - Important Safety Instructions NOTES 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Maintain well ventilated conditions aro...

Page 5 - Multiple Mode

- 4 - Product Features This product incorporates an LCD display and TV receiver in one system. Multiple Mode TV mode COMPOSITE mode S-VIDEO mode COMPONENT mode VGA mode High Quality Property LCD (Liquid Crystal Display) Designed with 15" color TFT liquid crystal display that shows a clear, crisp...

Page 6 - Front Panel

- 5 - Front Panel 1. INPUT button Press to select the modes: TV, COMPOSITE, S-VIDEO, COMPONENT or VGA. 2. MENU button Press to enter or exit setup menu. 3. CH ▼ / ▲ button In TV mode, press to select channels. In setup menu, the same function as ▼ / ▲ direction buttons. 4. VOL ◄ / ► button In TV mod...

Page 7 - Rear Panel

- 6 - Rear Panel 1. Component (YPbPr) Input Jacks Connect to the COMPONENT input and the L/R audio inputs in COMPONENT mode . 2. S-VIDEO Input Jack Connect to the S-VIDEO input in S-VIDEO mode 3. VIDEO/L/R Audio Input Jack Connect to the VIDEO input in COMPOSITE or S-VIDEO mode. Connect to the L/R a...

Page 8 - Remote Control; Remote Control Drawing

- 7 - Remote Control Remote Control Drawing 1. INPUT Button Press to select the modes: TV, COMPONENT, VGA, COMPOSITE or S-VIDEO. 2. 0~9 Number Buttons Press to select numbers. 3. LAST Button In the TV mode, press to return to the channel last viewed. 4. MUTE Button Press to turn on or off the speake...

Page 9 - Prepare the Remote Control; Using of Remote control

- 8 - Remote Control Prepare the Remote Control Gently push the back cover to open the battery compartment. Insert two batteries (1.5V, size AAA) into the compartment; please make sure the polarity matches the symbols on the inside the compartment. Gently push the back cover into place to close it. ...

Page 10 - System Connections; Connecting to External AV Signal Source

- 9 - System Connections • Do not connect the power cord until all other connections have been made. • Remove the jack cover before making any connections. • Make sure you observe the color cord when connecting audio and video cables. Connecting to External AV Signal Source Use the audio and video c...

Page 11 - Connecting to External AV Signal Source (COMPONENT)

- 10 - System Connections Connecting to External AV Signal Source (COMPONENT) Use the audio and video cables to connect the Component input jacks on the rear panel of the unit to the external AV signal source. After connection, turn on the power of the unit and external AV signal source and then pre...

Page 12 - Connecting to PC

- 11 - System Connections Connecting to PC The unit can be connected to PC (person computer) via the VGA cable. Follow the steps and the figure below to connect: 1. Connect one end of the VGA cable to the VGA input jack on the rear panel of the unit. 2. Connect the other end to the PC. 3. Connect on...

Page 13 - Connecting to Power Cable

- 12 - System Connections Connecting to Power Cable Plug the two-prong end of the power cord to an AC100-240V outlet. If you have difficulty inserting the plug, turn it over and reinsert it. If the unit will not be used for a long time, disconnect the plug from the outlet.

Page 14 - Connecting to TV Signal

- 13 - System Connections Connecting to TV Signal This unit can be connected to the TV signal input source via the TV jack on the rear panel. After connection, turn on the power of the unit; press the INPUT button to shift to TV mode. After connecting to the antenna, turn on the unit, and go on with...

Page 15 - TV Function; Preparations

- 14 - TV Function Preparations 1. After connection, press the POWER button to turn on the power. 2. Press the INPUT button to shift to TV mode. You can go on with the following operations: Image Setting Note: This item is only available when there is a signal input. Press the MENU button once to en...

Page 17 - Audio Setting

- 16 - TV Function Audio Setting Press the MENU button once to enter the setup menu. Press the ▲▼ button to select Audio and press the OK button to enter the menu shown on the right. In the Audio setup menu, press the ▲▼ button to select the desired item and press the OK button to enter. Press the M...

Page 22 - NICAM Function

- 21 - NICAM Function The unit support NICAM function under TV mode. Under NICAM TV broadcast: 1. When receiving stereo audio signals, press the STEREO/AUDIO button on the remote control repeatedly to shift the sound tracks between Nicam Stereo and Mono and the screen will appear corresponding displ...

Page 23 - Other Function; External AV Input Function

- 22 - Other Function External AV Input Function The unit has external AV input function. It supports COMPOSITE, S-VIDEO and COMPONENT modes. Use the audio, video, and S-Video cables to connect the unit to the external AV signal source such as recorder, video camera, satellite receiver or game playe...

Page 24 - Troubleshooting; PROBLEM POSSIBLE

- 23 - Troubleshooting PROBLEM POSSIBLE SOLUTION There is no sound. Make sure system connection is correct. Make sure the speakers are not muted. In the TV mode, set the correct sound mode. LCD is not displaying a picture. Make sure the unit is turned on and all connections are correct. Make sure th...

Page 25 - Specifications

- 24 - Specifications TFT-LCD Resolution 1024 x 768 TFT-LCD Screen Size 15 inches Power AC100~240V (50/60Hz) DC 12V 4A Power Consumption < 40W Dimension 345 × 84 × 390mm (LXWXD) Weight About 5.8 kg Ambient Temperature 10~45 DESIGN AND SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE "Polar...