Polaroid FLM-0711LA - Manuals

- 5 - Table Of Contents Introduction --------------------------------------------------------------------------------------------- Important Safety Instructions ----------------------------------------------------------------------- Product Features --------------------------------------------------...

- 6 - Product Description Main Panel 1. Power button Press to turn on or off the power. 2. MENU button Press to enter or exit the setup menu. 3. CH / button In TV mode, press to select channel. In the menu, press to adjust the value. 4. CH +/ button In TV mode, press to select channel. In the menu, ...

- 7 - Product Description (continued) 11. TV Antenna jack (2) Used to connect to the external antenna or the CATV connecting line. 12. TV Antenna jack (3) Used to connect to the external antenna. 13. LCD screen 7" color TFT LCD screen clearly display the data. Left Panel 1. Headphone jack When t...

- 10 - Preparation of Remote Control • The battery size is CR2025 • Refer to the drawing below, to remove the battery receptacle. • Insert the battery with the correct polarity facing up according to the mark on the battery holder. • Re-insert into the remote control. Usage of remote control For bes...

- 11 - Rechargeable Battery Description About Rechargeable Battery Pack The unit can be connected with a lithium polymer rechargeable battery that attaches to the bottom of the unit. Your new battery should be fully charged before initial use. Charging time is normally about 4 hours. A fully charged...

- 12 - Rechargeable Battery Description Battery Pack Attaching and Placement The unit’s power supply is the AC power adapter or the battery pack. The battery pack can be used as a stand. Refer to the following steps for attaching the Battery Pack: 1. Place the unit on a soft and smooth surface with ...

- 13 - Rechargeable Battery Description Charging the Battery Pack The battery must be attached to the unit to charge it. Plug the Power Adapter into the unit’s DC 9.5V IN Jack, which is located on left of the unit. Plug the other end of the Power Cord into a wall Outlet. Detaching the Battery Pack I...

- 14 - System Connections • Before plugging the power cord into an AC outlet, make sure that all other connections have been made as described below. • Always ensure that the unit, TV and any other electrical components are switched OFF before connecting to the unit. Power Supply Connection Connect ...

- 15 - System Connections Connecting to an Amplifier The unit can be connected to an amplifier. Plug the supplied A/V cable into the audio jack on the left side of the unit and plug the other end into an audio input on the amplifier. Please refer to the equipment’s manual of your amplifier before co...

- 16 - System Connections Connecting to a DC Adapter Connect one end of the specific DC adapter to the “DC 9.5V IN” jack on the left panel of the unit, and connect the other end to the cigarette lighter socket in the car as shown below: • The power supply of the car is not suitable for charging the ...

- 17 - System Connections Connecting to CATV antenna Connect one end of the provided connecting line to the TV signal input jack on the right panel of the unit, and the other end to the CATV signal source, as shown below: After connection, switch the TV/AV to TV. Connecting to external antenna (1) P...

- 19 - TV Setup Preparation 1. Connect the unit to the external antenna or CATV connecting cord. 2. Connect to power supply. 3. Turn on the power of the unit. 4. Switch the TV/AV to TV. 5. Press the MENU button to enter the setup menu. Picture Setup Menu Press the MENU button once to enter the Pictu...

- 20 - 3. Fine Tuning When the picture is not very good, you can perform fine tuning. Press the button to select FINE, press the button to start fine tuning, when the video and audio effects effect are best, stop the fine tuning and the program will be stored automatically. 4. Skip Press the button ...

- 21 - Troubleshooting Problem How To Check There is no sound. • Make sure the system connection is correct. • If wired headphones are plugged in, unplug them. • Make sure the volume is not turned down. There is no picture. • Make sure your system connection is correct. • Make sure the TV antenna is...

- 22 - Specifications TFT screen size 7 inches TV System NTSC Audio Out Analog Audio Out Output Level: 1.5V± 0.2 1.0 , Load: 10K Ω Video Out Video Out Output Level:1V P-P ±0.2, Load: 75 Ω Unbalanced Negative Power AC100-240V 50/60Hz Power Consumption >15W Dimension 200mmX154mmX41mm Weight About 1...