Polaroid 45 Ultra - Manuals

Page 2 - System Requirements

English 3 System Requirements Macintosh Systems • A Power Macintosh computer (includes Power Macintosh G3 and G4 computers) or compatible with a PowerPC processor and 64 megabytes (MB) of RAM. • Apple system software version 7.6 or later. • 400 MB of free disk space. • Scratch disk space equal to tw...

Page 3 - Unpack the Box

English 4 1 Unpack the Box Make sure you have all the following components. Contact your dealer if any is missing or damaged. a Scanner b Power cable (several provided for various power sources) c This manual d SCSI cable (25-pin to 50-pin) e Film carrier for 4x5 film f Adapter for 120 film, 2 1/4 x...

Page 4 - Position the Scanner

English 5 2 Position the Scanner Place the scanner on a flat, stable surface, free of vibration. Leave at least 2 inches (50mm) of space around all sides and the top of the scanner for adequate ventilation, and leave room at the back to reach the power switch on the rear panel. Caution: As with any ...

Page 5 - Connect the Scanner to

English 6 4 Connect the Scanner to the Computer The SprintScan 45 Ultra requires a SCSI host adapter in your computer. If your computer does not have an adapter, you must install one (see page 17). If your computer is a PC-compatible with a SCSI adapter, but the adapter is connected to a hard drive ...

Page 8 - Connect the Scanner to

English 9 5 Connect the Scanner to AC Power and Turn On 1 Connect the power cord to the power connector ( b ). 2 Turn the scanner power switch on. 3 Check the lights. The green light indicates power on. The yellow light blinks while the scanner initializes, and it remains steady when the scanner is ...

Page 9 - Loading the Film Carriers

English 10 6 Loading the Film Carriers The Four-Slide Film Carrier 1 With the text facing up and the hinge at the top, open the carrier flat as shown. 2 Place up to four mounted 35mm slides in the spaces pro-vided. Be sure the slide mounts fit properly in the recessed areas. The images should be rig...

Page 14 - Preview an Image

English 15 8 Preview an Image 1 Load the film or slide into the film carrier (as described previously). 2 Insert the carrier into the scanner (as described previously). 3 Start the PolaColor Insight program: 4 Select the type of slide or negative you are scanning from the Input list on the Preview p...

Page 15 - 0 Remove the Carrier

English 16 9 Enhance and Scan the Image Follow the online user’s guide instructions to enhance the image and perform a final scan. To view the online PolaColor Insight User’s Guide : 10 Remove the Carrier 1 When the scan is complete, open the door and remove the carrier. Remove the film and store it...

Page 18 - Installation Quickstart Errata

Page 19 - SprintScan 45 Ultra

SprintScan 45 Ultra English . . . . . . . . . . . . . . . . . . . . . . . . . 3 Installation Quickstart Errata

Page 20 - About This Document

English 3 About This Document This document provides corrections and updates for SprintScan 45 Ultra Installation Quickstart packaged with the scanner. System Requirements (Page 3) Macintosh Systems • A Power Macintosh computer (includes Power Macintosh G3 and G4 computers) or compatible with a Powe...